mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/kbdfans/kbdpad/mk1
History
fauxpark f5209aa4e9 Remove custom backlight code for PS2AVRGB boards (#7775) 
* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize
2020-01-18 23:00:32 -08:00
..
keymaps/default [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00
config.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00
info.json Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
mk1.c Remove custom backlight code for PS2AVRGB boards (#7775) 2020-01-18 23:00:32 -08:00
mk1.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00
readme.md [Keyboard] Update ATmega32A readme files to match template (#7462) 2019-11-23 20:42:20 -08:00
rules.mk Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) 2019-11-04 16:05:03 -08:00
usbconfig.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00

readme.md

KBDPad MKI

Custom numpad.

  • Keyboard Maintainer: MechMerlin
  • Hardware Supported: KBDPad MKI
  • Hardware Availability: KBDfans

Make example for this keyboard (after setting up your build environment):

make kbdfans/kbdpad/mk1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make kbdfans/kbdpad/mk1:default:flash

Reset Key: Hold down the key located at K00, commonly programmed as 0 while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.