History

Nick Brassel f6dd8dea2e Remove usages of config_common.h from config.h files. (#19714 )		2023-01-31 06:03:30 +11:00
..
keymaps	Reworked backlight keycodes. (#18961 )	2022-11-06 08:11:59 +11:00
config.h	Remove usages of config_common.h from config.h files. (#19714 )	2023-01-31 06:03:30 +11:00
edda.c	[Keyboard] Add Edda Keyboard (#13953 )	2021-08-12 06:59:07 -07:00
edda.h	[Keyboard] Add Edda Keyboard (#13953 )	2021-08-12 06:59:07 -07:00
info.json	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00
readme.md	[Keyboard] Add Edda Keyboard (#13953 )	2021-08-12 06:59:07 -07:00
rules.mk	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00

readme.md

Edda PCB

Alice layout PCB with top mounted USB C used in Mekanisk Edda

Keyboard Maintainer: martin
Hardware Supported: Edda PCB

Make example for this keyboard (after setting up your build environment):

make edda:default

Flashing example for this keyboard:

make edda:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.