6809f154c9
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> |
||
|---|---|---|
| .. | ||
| keymaps/default | ||
| config.h | ||
| hwpm87.c | ||
| hwpm87.h | ||
| info.json | ||
| readme.md | ||
| rules.mk | ||
Handwired 87 keys
Repaired from 87 keys keyboard using a Pro Micro
- Keyboard Maintainer: KD-MM2
- Hardware Supported: Pro Micro(need to solder more pins) or any board with ATMega32u4
- Hardware Availability: N/A (private board, might open source)
First, if you have Pro Micro
Checkout these image for more: 
Keymaps/Handwiring: 
If you have 25 GPIOs board, there is nothing to do.
Second, if you are using a Capslock LED, define LED pin in: config.h#34, and check the LED_PIN_ON_STATE if you get reversed led state: config.h#35
Make example for this keyboard (after setting up your build environment):
make handwired/hwpm87:default
Flashing example for this keyboard:
make handwired/hwpm87:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Plug cable, open QMK Toolbox and short RST pin and GND pin, then you will see it in flashmode
- Keycode in layout: Press the key mapped to
RESETif it is available