mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/stello65/sl_rev1
History
Ryan f9aeea64c1
Migrate MCU and BOOTLOADER to data-driven (#19529)
2023-02-08 18:41:46 +11:00
..
keymaps RESET -> QK_BOOT default keymaps (#17939) 2022-08-07 02:23:58 +01:00
config.h Remove unused SOFT_SERIAL_PIN from config.h (#19768) 2023-02-07 14:46:51 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
sl_rev1.c [Keyboard] Add Stello65 keyboard (#17168) 2022-06-07 11:28:13 -07:00
sl_rev1.h [Keyboard] Add Stello65 keyboard (#17168) 2022-06-07 11:28:13 -07:00

readme.md

Stello65

Stello65

Stello keyboard

  • Keyboard Maintainer: @wekey
  • Hardware Supported: Stello65 case, ATMEGA32U4
  • Hardware Availability: Group buy

Make example for this keyboard (after setting up your build environment):

make stello65/sl_rev1:default

Flashing example for this keyboard:

make stello65/sl_rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available