mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/noxary/valhalla
History
Ryan ace372d90d
Move matrix config to info.json, part 3 (#19991) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-11 00:34:34 +11:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
chconf.h
config.h Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
info.json Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
mcuconf.h
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
valhalla.c
valhalla.h Noxary Valhalla: refactor LAYOUT_all, add QMK Configurator data (#16241) 2022-02-05 20:53:51 -08:00

readme.md

Noxary Valhalla

valhalla

An ergonomic 65% by Noxary

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB
  • Hardware Availability: Noxary. As of november 17, the group buy has ended.

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Compile firmware

Make example for this keyboard (after setting up your build environment):

make noxary/valhalla:default

To directly flash the PCB after it is put into a DFU state, use

make noxary/valhalla:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.