90 lines
2.5 KiB
Text
90 lines
2.5 KiB
Text
#
|
|
# Makefile for V-USB
|
|
#
|
|
|
|
|
|
# Target file name (without extension).
|
|
TARGET = ps2_usb_vusb
|
|
|
|
# Directory common source filess exist
|
|
COMMON_DIR = ..
|
|
|
|
# Directory keyboard dependent files exist
|
|
TARGET_DIR = .
|
|
|
|
# keyboard dependent files
|
|
SRC = main.c \
|
|
keymap.c \
|
|
matrix.c \
|
|
led.c \
|
|
ps2_usart.c
|
|
|
|
CONFIG_H = config_vusb.h
|
|
|
|
|
|
# V-USB debug level: To use ps2_usart.c level must be 0
|
|
# ps2_usart.c requires USART to receive PS/2 signal.
|
|
OPT_DEFS = -DDEBUG_LEVEL=0
|
|
|
|
|
|
# MCU name, you MUST set this to match the board you are using
|
|
# type "make clean" after changing this, so all files will be rebuilt
|
|
#MCU = at90usb162 # Teensy 1.0
|
|
#MCU = atmega32u4 # Teensy 2.0
|
|
#MCU = at90usb646 # Teensy++ 1.0
|
|
#MCU = at90usb1286 # Teensy++ 2.0
|
|
MCU = atmega168
|
|
|
|
|
|
# Processor frequency.
|
|
# Normally the first thing your program should do is set the clock prescaler,
|
|
# so your program will run at the correct speed. You should also set this
|
|
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
|
# examples use this variable to calculate timings. Do not add a "UL" here.
|
|
F_CPU = 20000000
|
|
|
|
|
|
# Build Options
|
|
# comment out to disable the options.
|
|
#
|
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
#NKRO_ENABLE = yes # USB Nkey Rollover
|
|
NO_UART = yes # UART is unavailable
|
|
|
|
|
|
|
|
#---------------- Programming Options --------------------------
|
|
AVRDUDE = avrdude
|
|
# Type: avrdude -c ? to get a full listing.
|
|
AVRDUDE_PROGRAMMER = usbasp
|
|
AVRDUDE_PORT =
|
|
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
|
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
|
|
|
# Uncomment the following if you want avrdude's erase cycle counter.
|
|
# Note that this counter needs to be initialized first using -Yn,
|
|
# see avrdude manual.
|
|
#AVRDUDE_ERASE_COUNTER = -y
|
|
|
|
# Uncomment the following if you do /not/ wish a verification to be
|
|
# performed after programming the device.
|
|
#AVRDUDE_NO_VERIFY = -V
|
|
|
|
# Increase verbosity level. Please use this when submitting bug
|
|
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
|
# to submit bug reports.
|
|
#AVRDUDE_VERBOSE = -v -v
|
|
|
|
#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
|
AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
|
|
|
PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
|
|
|
|
|
|
|
include $(COMMON_DIR)/vusb.mk
|
|
include $(COMMON_DIR)/common.mk
|