* Fix#13409: Clamp peep distances from path centers
The debunch-peeps improvement did not account for the fact that peeps may change direction when they are only at the very edge of a tile - it's not entirely clear to me why this happens, but it does. The previous code would push these peeps back towards the center line over time, but the new behaviour allows them to keep walking along these very edge-y lines, which means they sometimes appear to be walking on the wrong sides of benches, railings, etc.
To fix the problem, do not simply keep the target coordinate constant for the direction the peep is moving in, but clamp it, so that peeps in these outlier positions will get pulled back to a more acceptable position within one tile. Peeps who are already debunched within the reasonable center area of the path are unaffected.
* Update replays for change
* Add changelog entry
* Fix broken hashes
Co-authored-by: duncanspumpkin <duncans_pumpkin@hotmail.co.uk>
* Fix#12895: only update ride mechanic status when advancing state
* add changelog message
* Change changelog wording
* Bump network version
Co-authored-by: Michael Steenbeek <m.o.steenbeek@gmail.com>
* Stop guests from being forced to the center line of a path over time
Change the way we apply randomness to peep destinations when moving from one tile to the next, to allow peeps that are moving along a straight path to maintain their perpendicular offset relative to the path direction, instead of being (eventually) forced back to the center line.
* Update test expectations
The changes to guest movement mean that the number of steps taken for these expected paths are now slightly different to before.
- Feature: [#12110] Add Hybrid Coaster (Rocky Mountain Construction I-Box) track type.
- Feature: [#12999] .sea (RCT Classic) scenarios are now listed in the “New Scenario” dialog.
- Feature: [#13000] objective_options command for console.
- Feature: [#13096] Add Esperanto translation.
- Feature: [#13164] Add 'Objective options' to Cheats menu.
- Change: [#9568] Change lift sounds of Reverser Roller Coaster and Compact Inverted Coaster to better fitting ones.
- Change: [#13160] The lay-out of the Park Cheats tab has been improved.
- Fix: [#1324] Last track piece map selection still visible when placing ride entrance or exit (original bug).
- Fix: [#3200] Close Construction window upon selecting vehicle page.
- Fix: [#4022] Fix Mac cursor offset on launch
- Fix: [#4041] Garbled park option on scenario editor with custom theme.
- Fix: [#4865] Offer an option to disable inhibiting the monitor power.
- Fix: [#5178] Lighting effects cannot be disabled in software mode
- Fix: [#5904] Empty errors on tile inspector base height change.
- Fix: [#6086] Cannot install existing track design with another name.
- Fix: [#6614, #8623] Colours are distorted when using OpenGL with Intel integrated graphics drivers.
- Fix: [#7443] Construction arrows pulse at irregular intervals.
- Fix: [#7518] Water isn't cut down by view clipping tool.
- Fix: [#7748] Tooltips would not timeout for normal UI elements.
- Fix: [#8015] RCT2 files are not found when put into the OpenRCT2 folder.
- Fix: [#8957] Error title missing when building with insufficient funds
- Fix: [#10186] Placing multiple saved rides ignores design name (original bug).
- Fix: [#12368] Desync due to ghost station pieces affecting changing ride settings.
- Fix: [#12940] Windows cause issues with snow drawing.
- Fix: [#13019] Simulated trains sometimes open construction window when they crash.
- Fix: [#13021] Mowed grass and weeds don't show up in extra zoom levels.
- Fix: [#13024] Console cursor does not correctly render at current cursor position.
- Fix: [#13029] Not all Junior Roller Coaster pieces are shown when "Show all track pieces" cheat is enabled.
- Fix: [#13044] Rides in RCT1 saves all have "0 customers per hour".
- Fix: [#13074] Entrance and exit ghosts for mazes not being removed.
- Fix: [#13083] Dialog for renaming conflicting track design crops text out.
- Fix: [#13097] Missing direction arrow for stations
- Fix: [#13098] UI buttons for entrance and exit don't toggle according to them being built.
- Fix: [#13098] Maze can still be constructed while placing entrance and exit (original bug).
- Fix: [#13118] Closing construction window resets ride viewport.
- Fix: [#13129] Missing error message when waiting for train to leave station on the ride measurements graph.
- Fix: [#13138] Fix logical sorting of list windows.
- Fix: [#13158] Cursors are drawn incorrectly in text input fields.
- Fix: [#13222] Vehicle collision causes negative number of passengers (original bug).
- Fix: [#13226, #7280] No error is shown when attempting to load a corrupted save.
- Fix: [#13266] Plugin API: Deleting key of sharedStorage not working.
- Fix: [#13278] Desync caused by ghost tiles changing the ride mode.
- Fix: [#13289] Litter and vomit sometimes not loading with RCT1 saved game or scenario
- Fix: [#13292] Impossible excitement rating requirements with finish building 5 coasters goal
- Improved: [#13023] Made add_news_item console command last argument, assoc, optional.
- Improved: [#13098] Improvements to the maze construction window user interface
- Improved: [#13125] Selecting the RCT2 files now uses localised dialogs.
Issue was actually caused by loading RCT1 saves from certain rotations, and fixed by reseting sprite quadrants when loading. Wasn't an issue with RCT2 saves as litter screen coordinates are set directly from the save, rather than calculated based on rotation and sprite width/height.
Windows' left value inside of cosine function is causing glitch-feel
movement for snows but in fact, x_start can simply modified by another magic
numbers.
* Remove 'Park parameters…' button
The scenario options are already accessible through the cheats menu
* Split off Objective group from General group
* Split off new Maintenance group from Staff group
* Shrink 'Force park rating' spinner to make room for label
* Change label 'Force weather' to 'Change weather to'
* Change label "Plants don't age" to 'Disable plants withering'
* Change some strings for consistent capitalisation
* Fix#1324: track selection visible when placing entrance or exit
* Improve maze construction window UX in entrance/exit mode
- Arrows are disabled when entrance and exit are being placed
- Clicking a construction mode will disable the entrance and exit mode
- Previous state restored when leaving entrance/exit construction mode
- Fix entrance/exit buttons not changing when the mode switches after placing the first entrance/exit
Co-authored-by: Simon Jarrett <simonjjarrett@gmail.com>
* Add "Hybrid coaster" ride type
* Add turns
* Add diagonal slopes
* Add bank transitions
* Add diagonal bank transitions
* Add banked turns
* Add sloped turns
* Add sloped bank transitions
* Add sloped banked turns
* Add s bends
* Add helices
* Add barrel rolls
* Add half loops
* Start changing supports to wooden
* Switch diagonals and banked turns to wooden supports
* Finish switching supports to wooden
* Alter default supports for small turns and steep turns
* Split track sprites that were glitching
* Fix incorrect sprite indices on small helices
* Add supports for large flat to steep pieces
* Fix bug with b supports
* Add supports for quarter loops
* Finalize set of track elements
* Fix strange colors when track piece is highlighted
* Update sprites.json
* Add support for corkscrews
* Fix incorrect remap colors and default supports
* Add slope to banked turn transitions
* Add support for preview image in color selection window
* Fix static glitches
* Correct Z offset
* Set segment heights (and fix more static glitches)
* Improve sloped curve supports
* Fix slope to banked turn transitions
* Fix dynamic glitches
* Fix boosters
* Remove corkscrews
* Set ride data and implement ride rating function
* Fix glitches on steep turns and gentle to steep
* Format code
* Add sprites
* Add track color preview image
* Fix formatting
* Add files to MSVC project
* Fix Testpaint
* Revert removal of RIDE_TYPE_50 from GetClassification
* Introduce constant instead of hard coded number
* Fix stray change
* Improve legibility of ride_ratings_calculate_hybrid_coaster()
* Fix comments on byte_97B23C
* Fix two other stray changes
* Fix Xcode project
* Adjust bounding boxes to make clipping behaviour more consistent
* Fix two glitches on medium and large turns
* Address comments from DuncansPumpkin
* Fix incorrect ride ID
* Fix steep turn sprites
* Run PNG images through OptiPNG
* Update changelog
* Fix namespace error
* Use arrays for supports to handle additional elements
* Rename functions to TitleCase and add namespace
* Increment network version
Co-authored-by: Edward Calver <hx010973@reading.ac.uk>
Co-authored-by: tylerleamon <59478575+tylerleamon@users.noreply.github.com>
Co-authored-by: Gymnasiast <m.o.steenbeek@gmail.com>
Co-authored-by: duncanspumpkin <duncans_pumpkin@hotmail.co.uk>
Co-authored-by: Aaron van Geffen <aaron@aaronweb.net>
* Fix missing error message on ride graph
Mistake made during implementation meant that the ride graph would not show the error message when the ride had not left the station. Another mistake meant that the tertiary colour of the ride window was not set to green. The tertiary colour was only used by this error message though so was not noticed.
* Fix entrance and exit ghosts not being removed for mazes
Co-authored-by: Simon Jarrett <simonjjarrett@gmail.com>
Co-authored-by: Tulio Leao <tupaschoal@gmail.com>
- Feature: [#10807] Add 2x and 4x zoom levels (currently limited to OpenGL).
- Feature: [#12703] Add scenario plugin APIs.
- Feature: [#12708] Add plugin-accessible names to all game actions.
- Feature: [#12712] Add TCP / socket plugin APIs.
- Feature: [#12840] Add Park.entranceFee to the plugin API.
- Feature: [#12884] Add BaseTileElement.occupiedQuadrants to the plugin API.
- Feature: [#12885] Add SmallSceneryElement.quadrant to the plugin API.
- Feature: [#12886] Make all scenery placement and remove actions available to the plugin API.
- Feature: [#2350, #12922] Add snow, heavy snow and blizzard to weather types.
- Fix: [#400] Unable to place some saved tracks flush to the ground (original bug).
- Fix: [#5753] Entertainers make themselves happy instead of the guests.
- Fix: [#7037] Unable to save tracks starting with a sloped turn or helix.
- Fix: [#12691] Ride graph tooltip incorrectly used count instead of number string.
- Fix: [#12694] Crash when switching ride types with construction window open.
- Fix: [#12701] Silent NSIS setup flag /S isn't silent, upgrade pop-up appears anyway.
- Fix: [#12737] Space Rings draw the same vehicle 4 times.
- Fix: [#12756] Scenario Editor crashing the game on macOS.
- Fix: [#12764] Rides don't start aged anymore.
- Fix: [#12818] Ride price not ignored in free-rides parks.
- Fix: [#12820] Title menu buttons not invalidating properly
- Fix: [#12845] Deleting ride with active ad campaign creates incorrect notification.
- Fix: [#12857] Incorrect Peep thoughts in imported RCT1 parks.
- Fix: [#12881] Guests' favourite rides are not listed in the guest window.
- Fix: [#12910] Plugin API: getRide sometimes returns null for valid ride IDs.
- Fix: [#12912] Plugin: selectedCell of CustomListView is being ignored on creation.
- Fix: [#12918] Cannot place vanilla TD6 tracks of the Hypercoaster, Monster Trucks, Classic Mini Roller Coaster, Spinning Wild Mouse and Hyper-Twister types.
- Fix: Incomplete loop collision box allowed overlapping track (original bug).
- Improved: [#12806] Add Esperanto diacritics to the sprite font.
- Improved: [#12837] Arabic text is now drawn and shaped correctly on Windows.
- Improved: [#12890] Add stroke to lowercase 'L' to differentiate from capital 'I'.
- Technical: [#12749] The required version of macOS has been lowered to 10.13 (High Sierra).
The track design was recognised as a Corkscrew RC, not as a Hypercoaster. Moved the conversion code from the track design repository to the TD6Importer (where it should have been, really).
This also fixes the issue that Hypercoasters, Monster Trucks, Classic Mini Roller Coasters, Spinning Wild Mouses and Hyper-Twisters placed from a track design have the wrong ride type.
