(svn r4726) - Backport from trunk (r4373, r4374, r4402):

Fix: Some weird behaviour with tile selection near bridges
This commit is contained in:
Darkvater 2006-05-03 21:28:48 +00:00
parent ca6ccf035f
commit 4021f48c58
1 changed files with 58 additions and 66 deletions

View File

@ -79,6 +79,7 @@ enum {
BRIDGE_PARTLY_LEVELED_FOUNDATION = 1 << 1 | 1 << 2 | 1 << 4 | 1 << 8,
// no foundations (X,Y direction) (tileh's 0, 3, 6, 9, 12)
BRIDGE_NO_FOUNDATION = 1 << 0 | 1 << 3 | 1 << 6 | 1 << 9 | 1 << 12,
BRIDGE_HORZ_RAMP = (BRIDGE_PARTLY_LEVELED_FOUNDATION | BRIDGE_NO_FOUNDATION) & ~(1 << 0)
};
static inline const PalSpriteID *GetBridgeSpriteTable(int index, byte table)
@ -957,8 +958,8 @@ static uint GetBridgeHeight(const TileInfo *ti)
static const byte _bridge_foundations[2][16] = {
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
{1,16,18,3,20,5,0,7,22,0,10,11,12,13,14},
{1,15,17,0,19,5,6,7,21,9,10,11, 0,13,14},
{0,16,18,3,20,5,0,7,22,0,10,11,12,13,14},
{0,15,17,0,19,5,6,7,21,9,10,11, 0,13,14},
};
extern const byte _road_sloped_sprites[14];
@ -1135,12 +1136,9 @@ static void DrawTile_TunnelBridge(TileInfo *ti)
if (ti->map5 & 8 && ti->z != 0) DrawCanalWater(ti->tile);
} else {
// draw transport route under bridge
uint f = _bridge_foundations[ti->map5&1][ti->tileh];
// draw foundation?
if (ti->tileh) {
int f = _bridge_foundations[ti->map5&1][ti->tileh];
if (f) DrawFoundation(ti, f);
}
if (f != 0) DrawFoundation(ti, f);
if (!(image&1)) {
const RailtypeInfo *rti = GetRailTypeInfo(GB(_m[ti->tile].m3, 0, 4));
@ -1202,77 +1200,71 @@ static void DrawTile_TunnelBridge(TileInfo *ti)
}
}
static inline bool IsTunnel(TileIndex t) {return !HASBIT(_m[t].m5, 7);}
static inline uint DiagDirToAxis(DiagDirection d) {return (d & 1);}
static inline DiagDirection GetTunnelDirection(TileIndex t) {return (DiagDirection)GB(_m[t].m5, 0, 2);}
static inline bool IsBridgeRamp(TileIndex t) {return !HASBIT(_m[t].m5, 6);}
static inline DiagDirection GetBridgeRampDirection(TileIndex t) {return (DiagDirection)((6 - (_m[t].m5 >> 4 & 2) - (_m[t].m5 & 1)) % 4);}
static inline bool IsTransportUnderBridge(TileIndex t) {return HASBIT(_m[t].m5, 5);}
static inline uint GetBridgeAxis(TileIndex t) {return GB(_m[t].m5, 0, 1);}
static uint GetSlopeZ_TunnelBridge(const TileInfo* ti)
{
TileIndex tile = ti->tile;
uint z = ti->z;
uint x = ti->x & 0xF;
uint y = ti->y & 0xF;
uint tileh = ti->tileh;
// swap directions if Y tunnel/bridge to let the code handle the X case only.
if (ti->map5 & 1) uintswap(x,y);
if (IsTunnel(tile)) {
uint pos = (DiagDirToAxis(GetTunnelDirection(tile)) == 0 ? y : x);
// to the side of the tunnel/bridge?
if (IS_INT_INSIDE(y, 5, 10+1)) {
// tunnel?
if ((ti->map5 & 0xF0) == 0) return z;
// bridge?
if (ti->map5 & 0x80) {
// bridge ending?
if (!(ti->map5 & 0x40)) {
if (BRIDGE_FULL_LEVELED_FOUNDATION & (1 << tileh)) // 7, 11, 13, 14
z += 8;
// no ramp for bridge ending
if ((BRIDGE_PARTLY_LEVELED_FOUNDATION & (1 << tileh) || BRIDGE_NO_FOUNDATION & (1 << tileh)) && tileh != 0) {
return z + 8;
} else if (!(ti->map5 & 0x20)) { // northern / southern ending
// ramp
return (z + (x>>1) + 1);
} else {
// ramp in opposite dir
return (z + ((x^0xF)>>1));
}
// bridge middle part
} else {
// build on slopes?
if (tileh != 0) z += 8;
// keep the same elevation because we're on the bridge?
if (_get_z_hint >= z + 8) return _get_z_hint;
// actually on the bridge, but not yet in the shared area.
if (!IS_INT_INSIDE(x, 5, 10 + 1)) return GetBridgeHeight(ti) + 8;
// in the shared area, assume that we're below the bridge, cause otherwise the hint would've caught it.
// if rail or road below then it means it's possibly build on slope below the bridge.
if (ti->map5 & 0x20) {
uint f = _bridge_foundations[ti->map5 & 1][tileh];
// make sure that the slope is not inclined foundation
if (IS_BYTE_INSIDE(f, 1, 15)) return z;
// change foundation type? XXX - should be const; accessor function!
if (f != 0) tileh = _inclined_tileh[f - 15];
}
// no transport route, fallback to default
}
}
// In the tunnel entrance?
if (5 <= pos && pos <= 10) return z;
} else {
// if it's a bridge middle with transport route below, then we need to compensate for build on slopes
if ((ti->map5 & (0x80 | 0x40 | 0x20)) == (0x80 | 0x40 | 0x20)) {
uint f;
if (tileh != 0) z += 8;
f = _bridge_foundations[ti->map5 & 1][tileh];
if (IS_BYTE_INSIDE(f, 1, 15)) return z;
if (f != 0) tileh = _inclined_tileh[f - 15];
if (IsBridgeRamp(tile)) {
DiagDirection dir = GetBridgeRampDirection(tile);
uint pos = (DiagDirToAxis(dir) == 0 ? y : x);
// On the bridge ramp?
if (5 <= pos && pos <= 10) {
uint delta;
if (HASBIT(BRIDGE_HORZ_RAMP, tileh)) return z + TILE_HEIGHT;
if (HASBIT(BRIDGE_FULL_LEVELED_FOUNDATION, tileh)) z += TILE_HEIGHT;
switch (dir) {
default:
case DIAGDIR_NE: delta = (TILE_SIZE - 1 - x) / 2; break;
case DIAGDIR_SE: delta = y / 2; break;
case DIAGDIR_SW: delta = x / 2; break;
case DIAGDIR_NW: delta = (TILE_SIZE - 1 - y) / 2; break;
}
return z + 1 + delta;
} else {
uint f = GetBridgeFoundation(tileh, DiagDirToAxis(dir));
if (f != 0) {
if (f < 15) return z + TILE_HEIGHT;
tileh = _inclined_tileh[f - 15];
}
}
} else {
// HACK on the bridge?
if (_get_z_hint >= z + TILE_HEIGHT + (tileh == 0x00 ? 0 : TILE_HEIGHT)) return _get_z_hint;
if (IsTransportUnderBridge(tile)) {
uint f = _bridge_foundations[GetBridgeAxis(tile)][tileh];
if (f != 0) {
if (f < 15) return z + TILE_HEIGHT;
tileh = _inclined_tileh[f - 15];
}
}
}
}
// default case
return GetPartialZ(ti->x & 0xF, ti->y & 0xF, tileh) + ti->z;
return z + GetPartialZ(x, y, tileh);
}
static uint GetSlopeTileh_TunnelBridge(const TileInfo* ti)