mirror of https://github.com/OpenTTD/OpenTTD.git
37 lines
1.7 KiB
Plaintext
37 lines
1.7 KiB
Plaintext
Ships:
|
|
======
|
|
Set the YAPF (Yet Another Path Finder) type in the "Configure Pathes/Vehicles/YAPF for ships":
|
|
- 0 - No YAPF (NPF or old PF)
|
|
- 1 - YAPF type 1 (Node = Tile/Trackdir, 90 deg. turns allowed)
|
|
- 2 - YAPF type 2 (Node = Tile/ExitDir , 90 deg. turns allowed)
|
|
- 3 - YAPF type 3 (Node = Tile/Trackdir, no 90 deg.)
|
|
- 4 - YAPF type 4 (Node = Tile/ExitDir , no 90 deg.)
|
|
|
|
|
|
Set the "npf_max_search_nodes" value in your openttd.cfg to tune the pathfinder behavior.
|
|
This value tells, how many nodes (Tile/Trackdir or Tile/ExitDir) combinations the pathfinder
|
|
should visit before it ends. The lower number would mean quicker, but less accurate results.
|
|
The "npf_max_search_nodes" value is shared between NPF and YAPF and has the same meaning.
|
|
|
|
The pathfinder without such limit would be unusable on large maps, where number of visited
|
|
nodes can exceed 10 milions. NPF on my machine (dual code AMD 4400+) with 1 milion of nodes
|
|
visited took 2 minutes to finish, but with this limit set to 10000 it takes 20 miliseconds.
|
|
The new YAPF had similar results (18 seconds vs. 4 miliseconds).
|
|
|
|
|
|
Road Vehicles:
|
|
==============
|
|
Set the YAPF (Yet Another Path Finder) type in the "Configure Pathes/Vehicles/YAPF for road vehs":
|
|
- 0 - No YAPF (NPF or old PF)
|
|
- 1 - YAPF type 1 (Node = Tile/Trackdir, 90 deg. turns allowed)
|
|
- 2 - YAPF type 2 (Node = Tile/ExitDir , 90 deg. turns allowed)
|
|
|
|
Trains:
|
|
=======
|
|
Same types as for ships:
|
|
- 0 - No YAPF (NPF or old PF)
|
|
- 1 - YAPF type 1 (Node = Tile/Trackdir, 90 deg. turns allowed)
|
|
- 2 - YAPF type 2 (Node = Tile/ExitDir , 90 deg. turns allowed)
|
|
- 3 - YAPF type 3 (Node = Tile/Trackdir, no 90 deg.)
|
|
- 4 - YAPF type 4 (Node = Tile/ExitDir , no 90 deg.)
|