When performing migrations, and need to remap external users to local
ones, when no local mapping is possible, map the external user to Ghost,
rather than the user who initiated the migration.
Mapping the external user to the migration initiator has the potential
of breaking assumptions elsewhere, like only having one review per pull
request per user. Mapping these migrated, locally unavailable users to
Ghost makes sure these - often hidden - assumptions do not break.
Fixes#3860.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
regression from 767e9634d3. It changed
the parsing of the [admin] section from being derived from the content
of each key with mustMapSetting(rootCfg, "admin", &Admin) to
explicitly listing all keys in the code.
SEND_NOTIFICATION_EMAIL_ON_NEW_USER was not added and therefore
ignored. As a consequence notifications of newly registered users were
never sent.
For security reasons, scoping access to a redis server via ACL rules is
a good practice. Some parts of the codebase handles prefix like cache[^1]
and session[^2], but the queue module doesn't.
This patch adds this missing functionality to the queue module.
Note about relevant test:
I tried to keep the PR as small as possible (and reasonable), and not
change how the test runs. Updated the existing test to use the same
redis address and basically duplicated the test with the extra flag. It
does NOT test if the keys are correct, it ensures only it works as
expected. To make assertions about the keys, the whole test has to be
updated as the general wrapper doesn't allow the main test to check
anything provider (redis) specific property. That's not something I
wanted to take on now.
[^1]: e4c3c039be/modules/cache/cache_redis.go (L139-L150)
[^2]: e4c3c039be/modules/session/redis.go (L122-L129)
Signed-off-by: Victoria Nadasdi <victoria@efertone.me>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3836
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Victoria Nadasdi <victoria@efertone.me>
Co-committed-by: Victoria Nadasdi <victoria@efertone.me>
Previously, if no branch was explicitly specified for a workflow, it
defaulted to the default branch of the repo. This worked fine for
workflows that were triggered on push, but it prevented showing badges
for workflows that only run on tags, or on schedule - since they do not
run on a specific branch.
Thus, relax the conditions, and if no branch is specified, just return
the latest run of the given workflow. If one is specified, *then*
restrict it to said branch.
Fixes#3487.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Current package registry for RubyGems does not work with Bundler, because it implements neither the [compact index](https://guides.rubygems.org/rubygems-org-compact-index-api/) or the [dependency API](https://guides.rubygems.org/rubygems-org-api/). As a result, bundler complains about finding non-existing dependencies when installing anything with dependency: `revealed dependencies not in the API or the lockfile`.
This patch provides a minimal implementation for the compact index API to solve this issue. Specifically, we implemented a version that does not cache the results / do incremental updates; which is consistent with the current implementation.
Testing:
* Modified existing integration tests.
* Manually Verified bundler is able to parse the served versions / info file.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3811
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Haoyuan (Bill) Xing <me@hoppinglife.com>
Co-committed-by: Haoyuan (Bill) Xing <me@hoppinglife.com>
This commit changes the code that deletes a runner so it updates the UUID before deleting the record. The new UUID is set to 8 0xff bytes followed by a little endian version of the record's numeric ID. Such UUIDs cannot be created from tokens when registering runners, as the first 16 bytes of the token are in the `[0-9a-f]` range. This should prevent deleted runners from colliding with new records if the tokens share the same first 16 characters.
It is a possible solution to issue #3828
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3830
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Emmanuel BENOÎT <tseeker@nocternity.net>
Co-committed-by: Emmanuel BENOÎT <tseeker@nocternity.net>
In
801792e4dc Rename Str2html to SanitizeHTML and clarify its behavior (followup)
the replacement was incorrect because
c9d0e63c20 Remove unnecessary "Str2html" modifier from templates
was not applied and Str2html should have not been present in the first
place.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3554
Before explaining the fix itself, lets look at the `action` table, and
how it is populated. Data is only ever inserted into it via
`activities_model.NotifyWatchers`, which will:
- Insert a row for each activity with `UserID` set to the acting user's
ID - this is the original activity, and is always inserted if anything
is to be inserted at all.
- It will insert a copy of each activity with the `UserID` set to the
repo's owner, if the owner is an Organization, and isn't the acting
user.
- It will insert a copy of each activity for every watcher of the repo,
as long as the watcher in question has read permission to the repo
unit the activity is about.
This means that if a repository belongs to an organizations, for most
activities, it will have at least two rows in the table. For
repositories watched by people other than their owner, an additional row
for each watcher.
These are useful duplicates, because they record which activities are
relevant for a particular user. However, for cases where we wish to see
the activities that happen around a repository, without limiting the
results to a particular user, we're *not* interested in the duplicates
stored for the watchers and the org. We only need the originals.
And this is what this change does: it introduces an additional option to
`GetFeedsOptions`: `OnlyPerformedByActor`. When this option is set,
`activities.GetFeeds()` will only return the original activities, where
the user id and the acting user id are the same. As these are *always*
inserted, we're not missing out on any activities. We're just getting
rid of the duplicates. As this is an additional `AND` condition, it can
never introduce items that would not have been included in the result
set before, it can only reduce, not extend.
These duplicates were only affecting call sites where `RequestedRepo`
was set, but `RequestedUser` and `RequestedTeam` were not. Both of those
call sites were updated to set `OnlyPerformedByActor`. As a result,
repository RSS feeds, and the `/repos/{owner}/{repo}/activities/feeds`
API end points no longer return dupes, only the original activities.
Rather than hardcoding this behaviour into `GetFeeds()` itself, I chose
to implement it as an explicit option, for the sake of clarity.
FixesCodeberg/Community#684, and addresses gitea#20986.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This fixes `initRepoPullRequestAllowMaintainerEdit()` to submit the form correctly (as a web form, rather than as JSON payload).
Fixes#3618, cherry picked from gitea#30854.
Co-Authored-By: wxiaoguang <wxiaoguang@gmail.com>
---
Manual testing steps:
- Open a PR against any repository, with the "Allow edits from maintainers" option checked.
- Open the developer console (`Ctrl-Shift-I` on Firefox), and look at the Network tab.
- Visit the PR, find the "Allow edits from maintainers" checkbox, and click it.
- See the developer console, and check that the response says the setting is false.
- Refresh the page *completely* (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is off.
- Click the box again to enable it.
- See the developer console, and check that the response says the setting is true.
- Reload without cache again (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is now on.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3675
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- add a new button to the org view that is only shown to the org members
- add integration test to verify the expected navigatability
- add a new translation string to that button
- fix display style of "View <orgname>" button on the dashboard
- fix gap size between buttons on the org view by utilizing the common class top-right-buttons
This allows `nix flake metadata` and nix in general to lock a *branch*
tarball link in a manner that causes it to fetch the correct commit even
if the branch is updated with a newer version.
For further context, Nix flakes are a feature that, among other things,
allows for "inputs" that are "github:someuser/somerepo",
"https://some-tarball-service/some-tarball.tar.gz",
"sourcehut:~meow/nya" or similar. This feature allows our users to fetch
tarballs of git-based inputs to their builds rather than using git to
fetch them, saving significant download time.
There is presently no gitea or forgejo specific fetcher in Nix, and we
don't particularly wish to have one. Ideally (as a developer on a Nix
implementation myself) we could just use the generic tarball fetcher and
not add specific forgejo support, but to do so, we need additional
metadata to know which commit a given *branch* tarball represents, which
is the purpose of the Link header added here.
The result of this patch is that a Nix user can specify `inputs.something.url =
"https://forgejo-host/some/project/archive/main.tar.gz"` in flake.nix
and get a link to some concrete tarball for the actual commit in the
lock file, then when they run `nix flake update` in the future, they
will get the latest commit in that branch.
Example of it working locally:
» nix flake metadata --refresh 'http://localhost:3000/api/v1/repos/jade/cats/archive/main.tar.gz?dir=configs/nix'
Resolved URL: http://localhost:3000/api/v1/repos/jade/cats/archive/main.tar.gz?dir=configs/nix
Locked URL: 804ede182b.tar.gz?dir=configs
/nix&narHash=sha256-yP7KkDVfuixZzs0fsqhSETXFC0y8m6nmPLw2GrAMxKQ%3D
Description: Computers with the nixos
Path: /nix/store/s856c6yqghyan4v0zy6jj19ksv0q22nx-source
Revision: 804ede182b6b66469b23ea4d21eece52766b7a06
Last modified: 2024-05-02 00:48:32
For details on the header value, see:
56763ff918/doc/manual/src/protocols/tarball-fetcher.md
Also add a test for GogsDownloaderFactory.New() to make sure
that the URL of the source repository is parsed correctly.
When the source gogs instance is hosted at a subpath like `https://git.example.com/gogs/<username>/<reponame>` the migration fails.
This PR fixes that.
Co-authored-by: hecker <tomas.hecker@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3572
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: varp0n <tom@gkstn.de>
Co-committed-by: varp0n <tom@gkstn.de>
When subscribing or unsubscribing to/from an issue on the web ui, the
request was posted to a route handled by `repo.IssueWatch`. This
function used `ctx.Req.PostForm.Get()`, erroneously.
`request.PostForm` is *only* available if `request.ParseForm()` has been
called before it. The function in question did not do that. Under some
circumstances, something, somewhere did end up calling `ParseForm()`,
but not in every scenario.
Since we do not need to check for multiple values, the easiest fix here
is to use `ctx.Req.PostFormValue`, which will call `ParseForm()` if
necessary.
Fixes#3516.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When a logged in user with no repositories visits their dashboard, it will
display a search box that lists their own repositories.
This is served by the `repo.SearchRepos` handler, which in turn calls
`commitstatus_service.FindReposLastestCommitStatuses()` with an empty
repo list.
That, in turn, will call `git_model.FindBranchesByRepoAndBranchName()`,
with an empty map. With no map, `FindBranchesByRepoAndBranchName()` ends
up querying the entire `branch` table, because no conditions were set
up.
Armed with a gazillion repo & commit shas, we return to
`FindReposLastestCommitStatuses`, and promptly call
`git_model.GetLatestCommitStatusForPairs`, which constructs a monstrous
query with so many placeholders that the database tells us to go
somewhere else, and flips us off. At least on instances the size of
Codeberg. On smaller instances, it will eventually return, and throw
away all the data, and return an empty set, having performed all this
for naught.
We fix this by short-circuiting `FindBranchesByRepoAndBranchName`, and
returning fast if our inputs are empty.
A test case is included.
Fixes#3521.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Mai-Lapyst