Plugin-Gallery: move to more specific categories

plugins/bsd/freebsd_hdd_power_state

@@ -50,7 +50,7 @@ graph_title HDD power state
 graph_vlabel Power state
 graph_args --upper-limit 1 -l 0
 graph_scale no
-graph_category disk
+graph_category sensors
 graph_info The power state of the hard disk drives on the system (1 is spun up, 0 is idle/standby).
 EOM
         echo $DEVICES | awk 'BEGIN{OFS=""} { for (i = 0; i++ < NF;) print "power", i, ".label ", $i }'

plugins/openwrt/snmp__memory_openwrt

@@ -73,7 +73,7 @@ if (defined $ARGV[0] and $ARGV[0] eq "config")
 	print "graph_title Memory usage
 graph_args --base 1000 -l 0 
 graph_vlabel kB
-graph_category system
+graph_category memory
 graph_info This graph shows total and used memory on the host.
 memsize.label total
 memused.label used

plugins/snmp/snmp__cpu_usage

@@ -140,7 +140,7 @@ if ($ARGV[0] and $ARGV[0] eq "config")
 	print "graph_title CPU Usage on $host\n";
 	print "graph_args --base 1000 --lower-limit 0\n";
 	print "graph_vlabel Percentage on one minute\n";
-	print "graph_category system\n";
+	print "graph_category cpu\n";
 	print "graph_info This graph shows the CPU usage on one minute\n";
 
 	my $firstCounter = 1;

plugins/snmp/snmp__fn/snmp__fn

@@ -114,7 +114,7 @@ config()
   echo "multigraph fn_cpu"
   echo "host_name $SNMPCLIENT"
   echo "graph_title $UNIT - CPU usage"
-  echo 'graph_category system'
+  echo 'graph_category fw'
   echo 'graph_vlabel %'
   echo 'graph_info This graph shows current CPU usage.'
   echo 'graph_args --base 1000 -r --lower-limit 0 --upper-limit 100'
@@ -125,7 +125,7 @@ config()
   echo "multigraph fn_memory"
   echo "host_name $SNMPCLIENT"
   echo "graph_title $UNIT - Memory usage"
-  echo 'graph_category system'
+  echo 'graph_category fw'
   echo 'graph_vlabel %'
   echo 'graph_info This graph shows current memory usage.'
   echo 'graph_args --base 1000 -r --lower-limit 0 --upper-limit 100'
@@ -136,7 +136,7 @@ config()
   echo "multigraph fn_sessions"
   echo "host_name $SNMPCLIENT"
   echo "graph_title $UNIT - Sessions"
-  echo 'graph_category Other'
+  echo 'graph_category fw'
   echo 'graph_vlabel Active Sessions'
   echo 'graph_info Active session count on the Fortigate firewall'
   echo 'fortisessions.label Sessions'
@@ -146,7 +146,7 @@ config()
   echo "multigraph fn_vpnsessions"
   echo "host_name $SNMPCLIENT"
   echo "graph_title $UNIT - SSLvpn Sessions"
-  echo 'graph_category Other'
+  echo 'graph_category fw'
   echo 'graph_vlabel Sessions/Users'
   echo 'graph_info Loged in users with SSLvpn (WebSession or Tunnel-Mode)' 
   echo 'fortiuser.label Users'

plugins/solaris/solaris-memstat

@@ -52,7 +52,7 @@ if [ "$1" = "config" ]; then
 	echo '
 graph_args --base 1024 -l 0 --vertical-label Bytes
 graph_title Memory usage
-graph_category system
+graph_category memory
 graph_info This graph shows system memory use.
 graph_order kernel anon exec cacheused zfs cachefree free
 

plugins/synology/snmp__synology

@@ -121,7 +121,7 @@ host_name {hostname}
 graph_title HDD temperatures on {hostname}
 graph_vlabel Temperature in °C
 graph_args --base 1000
-graph_category system
+graph_category sensors
 graph_info HDD temperatures on {hostname}""".format(hostname=self.hostname)
 
 		for id, name, model, temp in self._get_disks():
@@ -136,7 +136,7 @@ host_name {hostname}
 graph_title System temperatures of {hostname}
 graph_vlabel Temperature in °C
 graph_args --base 1000
-graph_category system
+graph_category sensors
 graph_info System temperature of {hostname}
 sys_temp.info System temperature
 sys_temp.label Temperature

plugins/system/ibmfan

@@ -32,7 +32,7 @@ if [ "$1" = "config" ]; then
 	echo 'graph_args --base 1000 -l 0'
 	echo 'graph_vlabel speed'
 	echo 'graph_scale no'
-	echo 'graph_category system'
+	echo 'graph_category sensors'
 	echo 'graph_info This graph shows the speed of the system fan.'
 	echo 'fan.label speed'
 	echo 'fan.info The current speed of the system fan.'

plugins/ups/snmp__ipoman_

@@ -217,7 +217,7 @@ if (defined $ARGV[0] and $ARGV[0] eq "config") {
 	print "graph_title Inlet $socketnumber voltage/frequency\n";
 
 	print "graph_args --base 1000 -l 0\n";
-	print "graph_category system\n";
+	print "graph_category sensors\n";
 	print "graph_info This graph shows the tension and frequency to inlet $socketnumber on the Power Distribution Unit\n";
     
 	print "voltage.label Tension (V)\n";
@@ -233,7 +233,7 @@ if (defined $ARGV[0] and $ARGV[0] eq "config") {
 	print "graph_title Inlet $socketnumber current\n";
 
 	print "graph_args --base 1000 -l 0\n";
-	print "graph_category system\n";
+	print "graph_category sensors\n";
 	print "graph_info This graph shows the delivered current to inlet $socketnumber on the Power Distribution Unit\n";
     
 	print "current.label Current (A)\n";
@@ -245,7 +245,7 @@ if (defined $ARGV[0] and $ARGV[0] eq "config") {
 	print "graph_title Inlet $socketnumber power\n";
 
 	print "graph_args --base 1000 -l 0\n";
-	print "graph_category system\n";
+	print "graph_category sensors\n";
 	print "graph_info This graph shows the delivered apparent and real power to inlet $socketnumber of the Power Distribution Unit\n";
 	
 	print "apparentpower.label Apparent power (kVA)\n";
@@ -262,7 +262,7 @@ if (defined $ARGV[0] and $ARGV[0] eq "config") {
 	print "graph_title Outlet $socketnumber current\n";
 	
 	print "graph_args --base 1000 -l 0\n";
-	print "graph_category system\n";
+	print "graph_category sensors\n";
 	print "graph_info This graph shows the delivered current to outlet $socketnumber of the Power Distribution Unit\n";
     
 	print "current.label Delivered current (A)\n";
@@ -273,7 +273,7 @@ if (defined $ARGV[0] and $ARGV[0] eq "config") {
 	print "graph_title Outlet $socketnumber power\n";
 	
 	print "graph_args --base 1000 -l 0\n";
-	print "graph_category system\n";
+	print "graph_category sensors\n";
 	print "graph_info This graph shows the delivered apparent and real power to outlet $socketnumber of the Power Distribution Unit\n";
 	
 	print "apparentpower.label Apparent power (kVA)\n";