Commit Graph

24 Commits

Author SHA1 Message Date
Alexander Neumann ca4af43c03 archiver: Return low-level errors
This commit changes the archiver so that low-level errors saving data to
the repo are returned to the caller (instead of being handled by the
error callback function). This correctly bubbles up errors like a full
temp file system and makes restic abort early and makes all other worker
goroutines exit.
2018-05-10 21:30:09 +02:00
Alexander Neumann 2218ecd049 archiver: Use lstat before open/fstat
The previous code tried to be as efficient as possible and only do a
single open() on an item to save, and then fstat() on the fd to find out
what the item is (file, dir, other). For normal files, it would then
start reading the data without opening the file again, so it could not
be exchanged for e.g. a symlink.

This behavior starts the watchdog on my machine when /dev is saved
with restic, and after a few seconds, the machine reboots.

This commit reverts the behavior to the strategy the old archiver code
used: run lstat(), then decide what to do. For normal files, open the
file and then run fstat() on the fd to verify it's still a normal file,
then start reading the data.

The downside is that for normal files we now do two stat() calls
(lstat+fstat) instead of only one. On the upside, this does not start
the watchdog. :)
2018-05-01 23:05:50 +02:00
Alexander Neumann c83c03ed63 archiver: Fix blocking on pipes 2018-04-30 15:34:58 +02:00
Alexander Neumann 4e34325035 archiver: Process dirs concurrently 2018-04-30 15:13:28 +02:00
Alexander Neumann 78bd591c7c archiver: Improve buffer pool 2018-04-30 15:13:28 +02:00
Alexander Neumann 400730afca archiver: Improve memory usage, tune buffer pool 2018-04-30 14:19:07 +02:00
Alexander Neumann f279731168 Add new archiver code 2018-04-25 14:42:45 +02:00
Alexander Neumann fd12a3af20 Remove old archiver code 2018-04-23 21:40:33 +02:00
Alexander Neumann 4e0b2a8e3a snapshot: correct error handling for filepath.Abs 2018-04-22 11:37:05 +02:00
Alexander Neumann f99c95c766 archiver: Fix intermediate index upload
A user discovered[1] that when the backup finishes during the upload of
an intermediate index, the upload is cancelled and the index never fully
saved, but the snapshot is saved and the backup finalizes without an
error. This lead to a situation where a snapshot references data that is
contained in the repo, but not referenced in any index, leading to
strange error messages.

This commit uses a dedicated context to signal the intermediate index
uploading routine to terminate after the last index has been uploaded.
This way, an upload running when the backup finishes is completed before
the routine terminates and the snapshot is saved.

[1] https://forum.restic.net/t/error-loading-tree-check-prune-and-forget-gives-error-b2-backend/406
2018-01-26 22:01:07 +01:00
Alexander Neumann 663c57ab4d debug: Remove manual Str() call Log() 2018-01-25 20:49:41 +01:00
Matthew Dawson 3a16148447
archiver/archiver: Use Index.Has() instead of Index.Lookup() in isKnownBlob
Index.Has() is a faster then Index.Lookup() for checking if a blob exists
in the index.  As the returned data is never used, this avoids a ton
of allocations.
2018-01-23 22:26:10 -05:00
Matthew Dawson df2c03a6a4
repository/master_index: Optimize Index.Lookup()
When looking up a blob in the master index, with several
indexes present in the master index, a significant amount of time
is spent generating errors for each failed lookup.  However, these
errors are often used to check if a blob is present, but the contents
are not inspected making the overhead of the error not useful.

Instead, change Index.Lookup (and Index.LookupSize) to instead return
a boolean denoting if the blob was found instead of an error.  Also change
all the calls to these functions to handle the new function signature.

benchmark                                            old ns/op     new ns/op     delta
BenchmarkMasterIndexLookupSingleIndex-6              820           897           +9.39%
BenchmarkMasterIndexLookupMultipleIndex-6            12821         2001          -84.39%
BenchmarkMasterIndexLookupSingleIndexUnknown-6       5378          492           -90.85%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6     17026         1649          -90.31%

benchmark                                            old allocs     new allocs     delta
BenchmarkMasterIndexLookupSingleIndex-6              9              9              +0.00%
BenchmarkMasterIndexLookupMultipleIndex-6            59             19             -67.80%
BenchmarkMasterIndexLookupSingleIndexUnknown-6       22             6              -72.73%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6     72             16             -77.78%

benchmark                                            old bytes     new bytes     delta
BenchmarkMasterIndexLookupSingleIndex-6              160           160           +0.00%
BenchmarkMasterIndexLookupMultipleIndex-6            3200          240           -92.50%
BenchmarkMasterIndexLookupSingleIndexUnknown-6       1232          48            -96.10%
BenchmarkMasterIndexLookupMultipleIndexUnknown-6     4272          128           -97.00%
2018-01-23 22:25:56 -05:00
George Armhold d886cb5c27 replace ad-hoc context.TODO() with gopts.ctx, so that cancellation
can properly trickle down from cmd_*.

gh-1434
2017-12-03 07:22:14 -05:00
Alexander Neumann eddb8549ef backup: By default, do not save the access time
This can be re-enabled with `--with-atime`.
2017-11-28 21:31:35 +01:00
Alexander Neumann ce180de9b8 Merge pull request #1243 from restic/improve-error-reporting
Improve error reporting
2017-09-16 14:54:30 +02:00
Alexander Neumann d4e994de7b Improve error reporting
This will print the error (including a stack trace) if available before
exiting.
2017-09-16 10:55:13 +02:00
Alexander Neumann a60e751217 Use .Equal() instead of == for time.Time
Closes #1238
2017-09-15 20:57:35 +02:00
Tobias Klein 43ff971dfd new sub-option for backup: time
New option to specify the timestamp for a backup
2017-09-09 13:26:35 +02:00
Alexander Neumann 83eb075e3a Resolve name collisions
At the moment when two items to be saved have the same directory name,
restic only saves the first one to the repo. Let's say we have a
structure like this:

    dir1
    └── subdir
        └── file
    dir2
    └── subdir
        └── file

When restic is run on `dir1/subdir` and `dir2/subdir`, it will only save
the first `subdir`:

    $ restic backup dir1/subdir dir2/subdir
    [...]

    $ restic ls -l latest
    drwxr-xr-x  1000   100      0 2017-08-27 20:56:39 /subdir
    -rw-r--r--  1000   100     17 2017-08-27 20:56:39 /subdir/file

That's obviously a bad thing, caused by an early decision to strip the
full path to the files/dirs to save and only leave the last directory.

This commit partly resolves this by handling colliding names and
resolving the conflicts. Restic will now append a counter to the file
(`-123`) until the conflict is resolved. So in the example above, we'll
end up with the following structure:

    $ restic ls -l latest
    drwxr-xr-x  1000   100      0 2017-08-27 20:56:39 /subdir
    -rw-r--r--  1000   100     17 2017-08-27 20:56:39 /subdir/file
    drwxr-xr-x  1000   100      0 2017-08-27 20:56:46 /subdir-1
    -rw-r--r--  1000   100     17 2017-08-27 20:56:46 /subdir-1/file

This partly addresses #549 and closes #1179.

At first I thought that the obvious correction would be to archive the
full path. But it turns out that collisions may still occur: Suppose you
have a file named `foo` in the current directory, and the parent directory
also contains a file `foo`. Archiving these with restic also causes a
collision, since restic strips the `../` from the first file:

    $ restic backup ../foo foo

This also happens with `tar`, which does not handle the collision and
will happily archive two files called `foo`.

So, the best way forward is to handle name collisions and archive the
whole path. The latter will be tackled in a separate PR.
2017-09-05 21:47:02 +02:00
Emil Hessman c2ff7150aa internal: check error before deferring file Close()
If there is an error, file will be `nil`. We should check the returned error before deferring file `Close()`.
2017-08-13 19:28:13 +02:00
Alexander Neumann 23c903074c Move restic package to internal/restic 2017-07-24 17:43:32 +02:00
Alexander Neumann 6caeff2408 Run goimports 2017-07-23 14:21:03 +02:00
Alexander Neumann 83d1a46526 Moves files 2017-07-23 14:19:13 +02:00
Renamed from src/restic/archiver/archiver.go (Browse further)