36 lines
3.0 KiB
Plaintext
36 lines
3.0 KiB
Plaintext
"presnooze" = "Snooze";
|
|
"sensor" = "Sensor";
|
|
"calibrate" = "Calibrate";
|
|
"statusactiontitle" = "Status";
|
|
"scanbluetoothdeviceactiontitle" = "Scan for Transmitter";
|
|
"forgetbluetoothdeviceactiontitle" = "Forget Transmitter";
|
|
"startsensor" = "Start Sensor";
|
|
"stopsensor" = "Stop Sensor";
|
|
"startsensortimeinfo" = "In the next dialogs, you will need to set the date and time the sensor was inserted. It is important that you set the date and time as correct as possible.";
|
|
"scanbluetoothdeviceongoing" = "Scanning for Transmitter...";
|
|
"bluetoothisnoton" = "Bluetooth is not on. Switch on bluetooth first and then try again.";
|
|
"bluetoothIsNotAuthorized" = "You did not give bluetooth permission for xDrip4iOS. Go to the settings, find the xDrip4iOS app, and enable Bluetooth.";
|
|
"startScanningInfo" = "Scanning Started.\n\nKeep xDrip4iOS open in the foreground until a connection is made.\n\n(There's no need to turn off Auto-Lock. Just don't press the home button and don't lock your iPhone)";
|
|
"sensorstart" = "Sensor Start";
|
|
"notstarted" = "Not Started";
|
|
"notknown" = "Not Known";
|
|
"lastconnection" = "Last Connection";
|
|
"transmitterbatterylevel" = "Transmitter Battery Level";
|
|
"ago" = "ago";
|
|
"licenseinfo" = "This program is free software distributed under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version.\r\n\nThis program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.\r\n\nSee http://www.gnu.org/licenses/gpl.txt for more details.\r\n\r\nInfo: ";
|
|
"info" = "Please Read";
|
|
"transmitterinfo" = "First go to the Bluetooth screen where you can add and scan for your transmitter.\r\n\nThen come back to the Home screen and start your sensor.";
|
|
"startsensorbeforecalibration" = "You cannot calibrate unless you have started a sensor.";
|
|
"theresNoCGMTransmitterActive" = "You cannot calibrate unless you have a transmitter connected.";
|
|
"theremustbeareadingbeforecalibration" = "There must be at least two readings before you can calibrate. You will be requested to calibrate as soon as there is another reading.";
|
|
"sensornotdetected" = "The sensor was not detected. Check if the Transmitter is correctly placed on the sensor.";
|
|
"transmitternotpaired" = "The Transmitter is not paired with this iPhone. Open the application.";
|
|
"transmitterpairingtoolate" = "Too late! The Transmitter has already been disconnected. You should get a new pairing request in a few minutes.";
|
|
"transmitterpairingsuccessful" = "The Transmitter was successfully paired.";
|
|
"transmitterpairingattempttimeout" = "Transmitter did not reply to pairing request.";
|
|
"success" = "Success";
|
|
"failed" = "Failed";
|
|
"calibrationNotNecessary" = "With OOPWeb enabled, calibration is not necessary for the Libre sensor. If you still want to use calibration, then go to the Developer settings and enable 'Override Web OOP Calibration'.";
|
|
"dexcomBatteryTooLow" = "The Transmitter battery is too low!";
|
|
"sensorAge14Days" = "The Sensor has reached its maximum age.";
|