29 lines
1.3 KiB
Markdown
29 lines
1.3 KiB
Markdown
# Center x Enter
|
|
|
|
|
|
|
|
A 30% keyboard with the enter key placed in the center.
|
|
Option to install a rotary encoder is also available.
|
|
VIA (Remap) is also supported.
|
|
|
|
* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
|
|
* Hardware Supported: Center x Enter PCB, Pro Micro
|
|
* Hardware Availability: https://github.com/takashicompany/center-enter
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make takashicompany/center_enter:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make takashicompany/center_enter:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|