mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/kudox_full/readme.md
x1 a461f607e7
[Keyboard] Add Kudox Full (#15256) 
* Add Kudox Full keyboard

* Add keyboards/kudox_full SPDX identifier

* Modify rule.mk of keyboards/kudox_full

* Remove html code from README of keyboards/kudox_full

* Modify readme of keyboards/kudox_full

* rev1.c includes rev1.h - kudox-full/rev1

* Move to <keyboard>.c oled_task_user and eeconfig_init_user

* Move post_config.h MOUSEKEY_*

* Change BOOTMAGIC_ENABLE no kudox_full

* Modify the obsoleted codes

* Modify eeconfig_init_kb from eeconfig_init_user

* Set none as default, but values

* Add about the bootloader on kudox_full/readme

* Modify the comments in keyboards/kudox_full/rules.mk
2022-01-08 13:23:34 -08:00

1.4 KiB
Raw Blame History

The Kudox Full keyboard

Kudox logo

Kudox Full image2 Kudox Full image1
front angle

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

Building Firmware

Make example for this keyboard (after setting up your build environment):

make kudox_full/rev1:default

Flashing example for this keyboard:

make kudox_full/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.