qmk_sweep_skeletyl/keyboards/hub20
2022-09-23 22:46:23 +10:00
..
keymaps RESET -> QK_BOOT user keymaps (#17940) 2022-08-21 23:55:30 +01:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Change DRIVER_LED_COUNT to {LED,RGB}_MATRIX_LED_COUNT (#18399) 2022-09-23 22:46:23 +10:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
hub20.c [Keyboard] Add LED matrix and 2 layouts to hub20 (#12505) 2021-06-19 19:21:24 -07:00
hub20.h [Keyboard] Add LED matrix and 2 layouts to hub20 (#12505) 2021-06-19 19:21:24 -07:00
info.json Move keyboard USB IDs and strings to data driven: H (#17821) 2022-07-28 14:12:40 +01:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md Add bootmagic support for hub16 and hub20 (#12257) 2021-03-17 15:57:51 +11:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

Hub20

Hub20 is a 20 key macro pad with an inbuilt USB 2.0 hub and dual rotary encoders. It can be configured to be a left / right hand numberpad, along with a 4x5 1u layout.

For more information regarding the keyboard, please visit the Hub20 Website or GitHub Repo.

Make example for this keyboard (after setting up your build environment):

make hub20:default

Flashing example for this keyboard:

make hub20:default:flash

To reset the board into bootloader mode, do one of the following:

  • Press the reset switch between the center two USB-C ports while the board is plugged in
  • Hold the top left key while connecting the USB cable (also erases persistent settings)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.