27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# GPAD8-2R
|
|
|
|
|
|
|
|
8 Keys Custom Macro Pad, 2 Encoders, with USB Type-C, RGB underglow, RGB Per Key Lighting.
|
|
|
|
* Keyboard Maintainer: [gkeyboard](https://github.com/gkeyboard)
|
|
* Hardware Supported: GPAD8-2R PCB
|
|
* Hardware Availability: http://www.mltelectronic.com
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make gkeyboard/gpad8_2r:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make gkeyboard/gpad8_2r:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|