1.4 KiB
1.4 KiB
meck_tkl
A standard tenkeyless keyboard, using STM32 Blackpill.
- Keyboard Maintainer: Gabriel Kim
- Hardware Supported: Blackpill F401
- Hardware Availability: Thingiverse: Mechanical Keyboard - MECH - TKL
Make example for this keyboard (after setting up your build environment):
make handwired/meck_tkl:default
Flashing example for this keyboard:
make handwired/meck_tkl:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available
Wiring instructions
- On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
- USB-related pins:
PA10,PA11,PA12 - BOOT1 pin:
PB2
- USB-related pins:
Sample wiring:
