a07d1f22aa
* Add HOME/END keys as upper/lower on arrow-up/down * Reduce .hex file size by turning off unneeded options * Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand * Latest super latest version merge * cbbrowne keymap for XD75re * starting notes on XD75re keymap plans * First draft of bottom row of QWERTY * Switch my special bottom line over to QCENT * Dunno * Filling in wanted keys, bit by bit... * Add copyright, extra macro * Clean up comments, remove some experimental code I didn't like * TODO plans for xd75re * clean up keyboard layout * QCENT2 is my new experiment for the main keyboard... * Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer * Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing * More xd75 changes, now that I actually have it in hand * shift keymap around, as original attempt was a bit too aggressive in keeping to the edges * more revs to XD75 * Dropping parts of the centre keypad in favor of Keys I Really Need * Improve documentation to conform with how builds are done now * Improve documentation to conform with how builds are done now * Add cbbrowne rules file as alternative to having the rules in Makefile * Makefile not needed anymore for individual keymap
48 lines
1.6 KiB
Markdown
48 lines
1.6 KiB
Markdown
xd75 keyboard firmware
|
|
======================
|
|
|
|
The XD75Re is a 15x5 full-grid ortholinear keyboard manufactured by XIUDI. This port of the QMK firmware is my first shot at using QMK, so if you see any features done wrong (or just plain missing), feel free to fix them and put in a pull request!
|
|
|
|
## Quantum MK Firmware
|
|
|
|
For more info on this firmware (and how to make it your own), head over to [qmk.fm](http://qmk.fm).
|
|
|
|
## Building
|
|
|
|
Download or clone the whole firmware and navigate to the
|
|
keyboards/xd75 folder. Once your dev env is setup, you'll be able to
|
|
type `make` to generate your .hex - you can then use the Teensy Loader
|
|
to install the resulting .hex file, or have the `make` process install
|
|
it using DFU.
|
|
|
|
### Default
|
|
|
|
To build with the default keymap, simply run `make xd75-default`, and
|
|
to install via DFU, `make xd75-default-dfu`.
|
|
|
|
Note that DFU is likely to require root permissions, so installing the
|
|
firmware likely requires a command line like:
|
|
|
|
```
|
|
$ sudo make xd75-default-dfu
|
|
```
|
|
|
|
### Other Keymaps
|
|
|
|
The "default" keymap included is basically the OLKB Atomic keymap with
|
|
a few buttons added for RGB underglow control. This should be usable
|
|
as a starting point, but most people will be best served creating
|
|
their own keymap and flashing it - more info on creating your own
|
|
keymap is available in [the official QMK
|
|
documentation](https://docs.qmk.fm).
|
|
|
|
Keymaps follow the format **__\<name\>.c__** and are stored in
|
|
subdirectories under `keyboards/xd75/keymaps`
|
|
|
|
To build the firmware binary hex file for a specific keymap, and
|
|
install it, using DFU, just do `make` with a keymap like this:
|
|
|
|
```
|
|
$ make xd75-[default|<name>]
|
|
```
|
|
|