EC 60 PCB (#20050 )

* Add EC 60 PCB firmware

* Moved from data driven row/col def to config def

* Implemented proper LAYOUT_ changes

* Removed unnecessary `.h` includes

* Added `DISCHARGE_TIME`

Addition of a `DISCHARGE_TIME` time. This is to ensure that the ghost capacitor  that is the row strobed for the ADC read, is fully drained and doesn't carry charges that deviates the readings.

Tested on multiple hardware and confirmed working and improving the readings, both in terms of stability and consistency for baseline noise.

* Update readme.md

Added missing `cipulot/`in readme example commands

* Update keyboards/cipulot/ec_60/readme.md

Co-authored-by: Tom Barnes <barnestom@me.com>

* Removal of `info.json` lines as suggested

* Update to comply with `_kb` and `_user` separation

* Update keyboards/cipulot/ec_60/rules.mk

Co-authored-by: Drashna Jaelre <drashna@live.com>

---------

Co-authored-by: Tom Barnes <barnestom@me.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>

2023-03-23 10:05:49 +00:00

1.1 KiB

Raw Blame History

EC 60

60% Electrostatic Capacitive PCB, GH60 mounting compatible, with multi-layout support

Keyboard Maintainer: cipulot
Hardware Supported: EC 60
Hardware Availability: Github

Make example for this keyboard (after setting up your build environment):

make cipulot/ec_60:default

Flashing example for this keyboard:

make cipulot/ec_60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical Boot0 pins: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
Keycode in layout: Press the key mapped to QK_BOOT if it is available

1.1 KiB Raw Blame History

EC 60

Bootloader

1.1 KiB

Raw Blame History