mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/handwired/meck_tkl/readme.md
Gabriel Kim 1df390c34f
[Keyboard] Add Meck TKL handwired (#15533) 
* Add meck_tkl

* Fix configuration and pin assignment

* Rellocate A10 pin, as it is used by the USB DFU bootloader

* Add volume and media keys to the function keys layer

* Rellocate source files to the handwired keyboards folder and add documentation

* Review changes for PR
- Improve LAYOUT macro to match the keyboard layout.
- Use "kxy" as pin names on the LAYOUT macro.
- Remove unused mcuconf.h and halconf.h.
- Fix README.

* Improve layout macro naming
2022-01-09 09:44:33 -08:00

1.4 KiB
Raw Blame History

meck_tkl

meck_tkl

A standard tenkeyless keyboard, using STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make handwired/meck_tkl:default

Flashing example for this keyboard:

make handwired/meck_tkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

Wiring instructions

  • On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
    • USB-related pins: PA10, PA11, PA12
    • BOOT1 pin: PB2

Sample wiring:

wiring