34 lines
1.5 KiB
Markdown
34 lines
1.5 KiB
Markdown
# Smart 68
|
|
|
|
|
|
|
|
|
|
A 68% keyboard with hot-swappable switches & backlight LEDs, and a
|
|
front-mounted Fn key/bar using an Omron switch.
|
|
|
|
* Keyboard Maintainer: [Shados](https://github.com/Shados)
|
|
* Hardware Supported: Smart 68 PCB
|
|
* Hardware Availability: [A 2016 Geekhack group buy](https://web.archive.org/web/20180703134842/https://geekhack.org/index.php?topic=83442.0)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make smart68:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make smart68:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
You can enter the bootloader in three different ways:
|
|
|
|
1. **Bootmagic reset**: Hold down the key at (3,5) in the matrix (the 'B' key
|
|
in qwerty layouts) and plug in the keyboard. This will also work if the
|
|
board is still running its original TMK firmware.
|
|
2. **Physical reset button**: Briefly press the button on the back of the PCB.
|
|
This will also work if the board is still running its original TMK firmware.
|
|
3. **Keycode in layout**: Press the key mapped to `QK_BOOT` (Fn + Backspace, in
|
|
the default layout). This will *not* work if the board is still running its
|
|
original TMK firmware.
|