31 lines
1.4 KiB
Markdown
31 lines
1.4 KiB
Markdown
# NCR-80
|
|
|
|
|
|
|
|
> Re-imagination of the classic rebranded Cherry G81-3000 by NCR
|
|
|
|
NCR-80 is an affordable keyboard kit inspired by iconic vintage keyboards.
|
|
|
|
* Keyboard Maintainer: QMK Community
|
|
* Hardware Supported: ATmega32U4
|
|
* Hardware Availability: [AliExpress](https://www.aliexpress.com/item/1005003345941543.html) [Taobao 淘宝](https://item.taobao.com/item.htm?id=657482028672)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ncr80/hotswap:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make ncr80/hotswap:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|