21 lines
1.1 KiB
Markdown
21 lines
1.1 KiB
Markdown
# Edda PCB
|
|
|
|
Alice layout PCB with top mounted USB C used in Mekanisk Edda
|
|
|
|
* Keyboard Maintainer: [martin](https://github.com/arnstadm)
|
|
* Hardware Supported: [Edda PCB](https://tastatur.no/collections/forhandsbestilling-1/products/edda-pcb?variant=39481626001453)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make edda:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make edda:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
How to enter bootloader (DFU):
|
|
|
|
Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
|
|
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.
|