mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/inett_studio/sq80/readme.md
Mathias Andersson 958ddea52e
[Keyboard] Add iNETT Studio SQUARE 80% (#21082) 
This keyboard comes stock with a forked version of QMK that is quite
outdated at this point.

I decided to go with the name `sq80` to stay in line with the existing
`sqx`, and "SQ80" has been used in some of the communication from the
creators.
2024-02-19 14:48:17 -07:00

1.4 KiB
Raw Blame History

FOX × iNETT Studio SQUARE 80%

sq80

A TKL keyboard from the iNETT Studio's SQUARE series.

  • Keyboard Maintainer: Wraul
  • Hardware Supported: The QMK compatible hot swappable PCB offered during the GB
  • Hardware Availability: Geekhack Group Buy

Make example for this keyboard (after setting up your build environment):

make inett_studio/sq80:default

Flashing example for this keyboard:

make inett_studio/sq80:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

The PCB is delivered with a forked version of QMK.
At this moment it is not apparent if the stock firmware comes with a keybinding for entering the bootloader.

Enter the bootloader with the stock firmware:

  • Physical reset button: Briefly press the button on the back of the PCB

After flashing it is possible to enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the escape key and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available