For more information click [here](https://en.wikipedia.org/wiki/List_of_WLAN_channels).
## MACAP
`uint8_t* macAP;`
Mac address used for the access point mode.
Please note that the mac address will only replace the internal mac address when the accesspoint mode is enabled.
You can set a random mac address with `set macap random`.
## MACST
`uint8_t* macSt;`
Mac address used for the station mode.
Please note that the mac address will only replace the internal mac address when the station mode is enabled.
You can set a random mac address with `set macst random`.
## CH-TIME
`uint16_t chTime = 384;`
Time for scanning one channel before going to the next in milliseconds (only if channel hopping is enabled).
## MINDEAUTHS
`uint16_t minDeauths = 3`
Minimum number of deauthentication frames when scanning to change the LED to deauth mode.
## ATTACKTIMEOUT
`uint32_t attackTimeout = 600`
After what amount of time (in seconds) the attack will stop automatically.
Set it to 0 to disable it.
## DEAUTHS-PER-TARGET
`uint16_t deauthsPerTarget = 10;`
How many deauthentication and disassociation frames are sent out for each target.
## DEAUTH-REASON
`uint8_t deauthReason = 1;`
The [reason code](https://www.cisco.com/assets/sol/sb/WAP371_Emulators/WAP371_Emulator_v1-0-1-5/help/Apx_ReasonCodes2.html) that is sent with the deauth frames to tell the target device why the connection will be closed.
## BEACON-CHANNEL
`bool beaconChannel = false;`
If enabled, will sent all beacon and probe frames on different channels when running a beacon attack.
## BEACON-INTERVAL
`bool beaconInterval = false;`
If set true, beacons will be sent out every second. If set to false, the interval will be 100ms.
A longer interval means more stability and less spamming of packets, but it could take longer
until the clients find the ssids when scanning.
## RANDOMTX
`bool randomTX = false`
Enables randomized transmission power for sending out beacon and probe request frames.