New readme

replace wrong comments

.github/FUNDING.yml

@@ -3,7 +3,7 @@
 github: spacehuhntech
 patreon: # Replace with a single Patreon username
 open_collective: # Replace with a single Open Collective username
-ko_fi: # Replace with a single Ko-fi username
+ko_fi: spacehuhn
 tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
 community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
 liberapay: # Replace with a single Liberapay username

.github/config.yml

@@ -1,12 +1,14 @@
 # Configuration for welcome - https://github.com/behaviorbot/welcome
 newIssueWelcomeComment: >
-  Thanks for opening your first issue here! 🎉<br>
+  Congrats on opening your first issue on this repository! 🎉<br>
+  This is a automated message to help you avoid common pitfalls when asking for help online.<br>
   👉 Be sure to:<br>
-  1. 📖 Have a look at the [Wiki](https://github.com/spacehuhntech/esp8266_deauther/wiki) and [README](https://github.com/SpacehuhnTech/esp8266_deauther/blob/v2/README.md) for information<br>
-  2. 🔍 Search for similar [issues (open and closed)](https://github.com/SpacehuhnTech/esp8266_deauther/issues?q=is%3Aissue+)<br>
-  3. ✍️ Provide enough information to understand, recreate and help out with your problem<br>
-  4. ℹ️ Let us know if you find a solution and please share it with us<br>
-  5. 📕 Close the issue when your problem has been solved
+  * 🇬🇧 Communicate in English so everybody can understand you<br>
+  * 📖 Have a look at the [Wiki](https://github.com/spacehuhntech/esp8266_deauther/wiki) and [README](https://github.com/SpacehuhnTech/esp8266_deauther/blob/v2/README.md) for information<br>
+  * 🔍 Search for similar [issues (open and closed)](https://github.com/SpacehuhnTech/esp8266_deauther/issues?q=is%3Aissue+)<br>
+  * ✍️ Provide enough information to understand, recreate and help out with your problem<br>
+  * ℹ️ Let us know if you find a solution and please share it with us<br>
+  * 📕 Close the issue when your problem has been solved
 
 newPRWelcomeComment: 
 

.github/stale.yml

@@ -1,5 +1,5 @@
 # Number of days of inactivity before an issue becomes stale
-daysUntilStale: 90
+daysUntilStale: 180
 # Number of days of inactivity before a stale issue is closed
 daysUntilClose: 7
 # Issues with these labels will never be considered stale

.github/workflows/nightly.yml

@@ -10,11 +10,12 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Build message title
-        run: echo ::set-env name=TITLE::Deauther V2.5 $(echo ${{ github.sha }} | cut -c -7)
+        id: notif
+        run: echo ::set-output name=TITLE::Deauther V2 $(echo ${{ github.sha }} | cut -c -7)
           
       - name: Send message
         run: |
           curl -X POST https://api.github.com/repos/spacehuhntech/nightly-deauther/dispatches \
           -H 'Accept: application/vnd.github.everest-preview+json' \
           -u ${{ secrets.ACCESS_TOKEN }} \
-          --data '{"event_type": "${{ env.TITLE }}", "client_payload": {}}'
+          --data '{"event_type": "${{ steps.notif.outputs.TITLE }}", "client_payload": {}}'

LICENSE

@@ -2,7 +2,7 @@ Do not redistribute, advertise or sell this software as a "jammer"!!!
 
 MIT License
 
-Copyright (c) 2018 Stefan Kremser
+Copyright (c) 2020 Spacehuhn Technologies
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

README.md

@@ -1,110 +1,38 @@
-# ESP8266 Deauther 2.0
+# ESP8266 Deauther
 
-<p align="center"><img alt="PICTURE logo" src="https://raw.githubusercontent.com/wiki/spacehuhn/esp8266_deauther/img/deauther_logo.png" width="200"></p>
+<img src='https://deauther.com/img/logo.png' alt='Deauther Logo' width='200' />
 
-<p align="center">
-🐦 <a href="https://twitter.com/spacehuhn">Twitter</a>
-| 📺 <a href="https://www.youtube.com/channel/UCFmjA6dnjv-phqrFACyI8tw">YouTube</a>
-| 🌍 <a href="https://spacehuhn.de">spacehuhn.de</a><br>
-<br>
-<b>Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners!<br><br>
-Click <a href="https://github.com/spacehuhn/esp8266_deauther/wiki/Installation">here</a> for the installation tutorial.<br>
-  Click <a href="https://github.com/spacehuhn/esp8266_deauther/releases">here</a> for the .bin files.<br><br>
-Support the development of this project by purchasing one of the <a href="https://github.com/spacehuhn/esp8266_deauther/wiki/Supported-Devices">official deauther boards</a>.<br/>
-Or become a patron on <a href="https://patreon.com/spacehuhn" target="_blank">patreon.com/spacehuhn</a>.<br>
-Also available: <a href="https://www.tindie.com/products/Spacehuhn/spacehuhn-stickers/">Stickers</a></b>!
-</p>
+**Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners.**
 
-# [👉 Wiki](https://github.com/SpacehuhnTech/esp8266_deauther/wiki)
-# [👉 Binaries](https://github.com/SpacehuhnTech/esp8266_deauther/releases)
-# [👉 Development Boards](https://github.com/SpacehuhnTech/esp8266_deauther/wiki/Supported-Devices)
+## New Documentation
 
-## What is New
-[Here is a quick video about what is new](https://youtu.be/6oRmm3xfp6U)  
-Version 2.0:
-- Completly rewritten code base for better performance and later enhancements
-- Custom Deauther SDK for easy compiling using Arduino
-- New serial command line interface to control and debug the program
-- New display UI with a lot of new functions
-- Improved web interface with multi-language support
-- Improved scanning for access points and stations (+ continuous scanning mode)
-- Save and select device names for both scanning and attacking
-- Save up to 60 SSIDs and 25 devices in one list (you can create, load and save multiple lists)
-- Added [PacketMonitor](https://github.com/spacehuhn/PacketMonitor) to display UI
-- Deauth detection when scanning
-- RGB LED support for a quick indication what the device is doing (attacking, scanning, ...)
-- Better documentation on the new [wiki](https://github.com/spacehuhn/esp8266_deauther/wiki)
+Hi 👋  
+Please visit [Deauther.com](https://deauther.com) for information about this project.  
+Here are some quick links:
 
-## About this project
-This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip).  
+* [Buy](https://deauther.com/docs/buy)
+* [Download](https://deauther.com/docs/download)
+* [DIY Tutorial](https://deauther.com/docs/category/diy-tutorial)
+* [Usage](https://deauther.com/docs/category/usage)
+* [FAQ](https://deauther.com/docs/faq)
 
-The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network.  
-No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project.  
-I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see [802.11w](https://en.wikipedia.org/wiki/IEEE_802.11w-2009)), but only a few companies implemented it into their devices and software.  
-To effectively prevent a deauthentication attack, both client and access point must support the 802.11w standard with protected management frames (PMF).  
-While most client devices seem to support it when the access point forces it, basically no WiFi access point has it enabled.  
+## Password
 
-Feel free to test your hardware out, annoy these companies with the problem, share this project and push for a fix!
-This project is also a great way to learn more about WiFi, micro controllers, Arduino, hacking and electronics/programming in general.  
-**But please use this tool responsibly and do not use it against others without their permission!**
+The password for `pwned` is `deauther`
 
-The difference between deauthing and jamming: [click me](https://github.com/spacehuhn/esp8266_deauther/wiki/FAQ#difference-between-jammer-and-deauther)
+## About this Project
 
-## Official Deauther Boards
+This firmware allows you to easily perform a variety of actions to test 802.11 networks using an [ESP8266](https://www.espressif.com/en/products/socs/esp8266). It's also a great project for learning about WiFi, microcontrollers, Arduino, hacking and electronics/programming in general.  
 
-![PICTURE DSTIKE Deauther OLED Board](https://raw.githubusercontent.com/wiki/spacehuhn/esp8266_deauther/img/DSTIKE_Deauther_Board.jpg)
-
-If you want to support the development of this project, you can buy one of the official boards by DSTIKE (Travis Lin) on following sites:  
-- [Tindie](https://tindie.com/stores/lspoplove)  
-- [AliExpress](https://dstike.aliexpress.com/store/2996024)  
-- [Taobao](https://shop135375846.taobao.com)  
-
-Those boards are optimized for this project, ready to use and come preflashed with the Deauther software!  
-For more details visit the [Wiki](https://github.com/spacehuhn/esp8266_deauther/wiki) under [Supported Devices](https://github.com/spacehuhn/esp8266_deauther/wiki/Supported-Devices).  
+The deauthentication attack is the main feature, which can be used to disconnect devices from their WiFi network.  
+Although this denial-of-service attack is nothing new, a lot of devices are still vulnerable to it. Luckily this is slowly changing with more WiFi 6 enabled devices being used. But a lot of outdated WiFi devices remain in place, for example in cheap IoT hardware.
+With an ESP8266 Deauther, you can easily test this attack on your 2.4GHz WiFi network/devices and see whether it's successful or not. And if it is, you know you should upgrade your network.
 
 ## Disclaimer
+
 This project is a proof of concept for testing and educational purposes.  
-Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur!  
+Neither the ESP8266, nor its SDK was meant or built for such purposes. **Bugs can occur!**  
 
-Use it only against your own networks and devices!  
+**Use it only against your own networks and devices!**  
 Please check the legal regulations in your country before using it.  
-I don't take any responsibility for what you do with this program.  
-
-It is **not a frequency jammer** as claimed falsely by many people. Its attack, its method and how to protect against it is described above. It uses valid Wi-Fi frames described in the IEEE 802.11 standard and doesn't block or disrupt any frequencies.  
-
-This project is meant to draw more attention on this issue.  
-The [deauthentication](https://en.wikipedia.org/wiki/Wi-Fi_deauthentication_attack) attack shows how vulnerable the 802.11 Wi-Fi standard is and that it has to be fixed.  
-A solution is already there, why don't we use it?
-
-**Please don't refer to this project as "jammer", that totally undermines the real purpose of this project!**
-If you do, it only proves that you didn't understand anything of what this project stands for. Publishing content about this without a proper explanation shows that you only do it for the clicks, fame and/or money and have no respect for intellectual property, the community behind it and the fight for a better WiFi standard!  
-
-## Getting Started
-
-Visit our new [Wiki](https://github.com/spacehuhn/esp8266_deauther/wiki) on how to recreate this project and use it.  
-Happy Hacking!
-
-## Credits
-A huge thanks to:
-- [@deantonious](http://github.com/deantonious)
-- [@jLynx](https://github.com/jLynx)
-- [@lspoplove](https://github.com/lspoplove)
-- [@schinfo](https://github.com/schinfo)
-- [@tobozo](https://github.com/tobozo)
-- [@xdavidhu](https://github.com/xdavidhu)
-- [@PwnKitteh](https://github.com/PwnKitteh)
-
-for helping out with various things regarding this project and keeping it alive!  
-
-I also want to thank Espressif and their community for this awesome chip and all the software and hardware projects around it and the countless tutorials you can find online!  
-
-Shoutout to everyone working on the libraries used for this project:
-- [esp8266-oled-ssd1306](https://github.com/ThingPulse/esp8266-oled-ssd1306)
-- [ArduinoJson](https://github.com/bblanchon/ArduinoJson)
-- [LinkedList](https://github.com/ivanseidel/LinkedList)
-
-Also thanks to everyone that supports this project by [donating](http://spacehuhn.de/donate), being my [patron](http://patreon.com/spacehuhn) or buying one of the [official Deauther boards](https://www.tindie.com/stores/lspoplove) from DSTIKE.  
-
-## License 
-
-This software is licensed under the MIT License. See the [license file](LICENSE) for details.  
+We don't take any responsibility for what you do with this program.  

esp8266_deauther/A_config.h

@@ -1,5 +1,6 @@
-#ifndef config_h
-#define config_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #define ENABLE_DEBUG
 #define DEBUG_PORT Serial
@@ -7,13 +8,13 @@
 
 #define DEFAULT_ESP8266
 
-/* ---------------------------------------------------------- */
-/* ===>> !!! Uncomment the board that you're using: !!! <<=== */
-/* ---------------------------------------------------------- */
-
 // #define NODEMCU
 // #define WEMOS_D1_MINI
-// #define DSTIKE_DEAUTHER
+// #define HACKHELD_VEGA
+// #define DISPLAY_EXAMPLE_I2C
+// #define DISPLAY_EXAMPLE_SPI
+
+// #define MALTRONICS
 // #define DSTIKE_DEAUTHER_V1
 // #define DSTIKE_DEAUTHER_V2
 // #define DSTIKE_DEAUTHER_V3
@@ -39,11 +40,11 @@
 // #define DSTIKE_DEAUTHER_MOSTER_V5
 // #define DSTIKE_USB_DEAUTHER
 // #define DSTIKE_USB_DEAUTHER_V2
-// #define DSTIKE_DEAUTHER_WRISTBAND
 // #define DSTIKE_DEAUTHER_WATCH
 // #define DSTIKE_DEAUTHER_WATCH_V2
 // #define DSTIKE_DEAUTHER_MINI
 // #define DSTIKE_DEAUTHER_MINI_EVO
+
 // #define LYASI_7W_E27_LAMP
 // #define AVATAR_5W_E14_LAMP
 
@@ -55,11 +56,110 @@
 // #define RESET_SETTINGS
 
 // ========== CONFIGS ========== //
-#if defined(DSTIKE_D_DUINO_B_V5_LED_RING)
+
+// https://github.com/spacehuhntech/hackheld
+#if defined(HACKHELD_VEGA)
+// ===== LED ===== //
+  #define USE_LED true
+  #define LED_NEOPIXEL
+
+  #define LED_NEOPIXEL_GRB
+// #define LED_NEOPIXEL_RGB
+
+  #define LED_MODE_BRIGHTNESS 10
+
+  #define LED_NUM 1
+  #define LED_NEOPIXEL_PIN 15 // D8
+
+// ===== DISPLAY ===== //
+  #define USE_DISPLAY true
+  #define FLIP_DIPLAY true
+
+  #define SH1106_I2C
+
+  #define I2C_ADDR 0x3C
+  #define I2C_SDA 4      // D2
+  #define I2C_SCL 5      // D1
+
+// ===== BUTTONS ===== //
+  #define BUTTON_UP 14   // D5
+  #define BUTTON_DOWN 12 // D6
+  #define BUTTON_A 2     // D4
+  #define BUTTON_B 0     // D3
+
+// https://github.com/SpacehuhnTech/esp8266_deauther/wiki/Setup-Display-&-Buttons#example-setup-with-i2c-oled
+#elif defined(DISPLAY_EXAMPLE_I2C)
+
+// ===== DISPLAY ===== //
+  #define SH1106_I2C
+// #define SSD1306_I2C
+
+  #define I2C_ADDR 0x3C
+  #define I2C_SDA 5
+  #define I2C_SCL 4
+
+// #define FLIP_DIPLAY true
+
+// ===== BUTTONS ===== //
+  #define BUTTON_UP 14
+  #define BUTTON_DOWN 12
+  #define BUTTON_A 13
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 12
+// #define LED_NEOPIXEL_RGB
+
+  #define LED_NUM 1
+  #define LED_NEOPIXEL_PIN 9
+  #define LED_MODE_BRIGHTNESS 10
+
+
+// https://github.com/SpacehuhnTech/esp8266_deauther/wiki/Setup-Display-&-Buttons#example-setup-with-spi-oled
+#elif defined(DISPLAY_EXAMPLE_SPI)
+
+  #define SH1106_SPI
+// #define SSD1306_SPI
+
+  #define SPI_RES 5
+  #define SPI_DC 4
+  #define SPI_CS 15
+
+// #define FLIP_DIPLAY true
+
+// ===== BUTTONS ===== //
+  #define BUTTON_UP 0
+  #define BUTTON_DOWN 12
+  #define BUTTON_A 2
+
+// ===== LED ===== //
+  #define LED_NEOPIXEL_GRB
+// #define LED_NEOPIXEL_RGB
+
+  #define LED_NUM 1
+  #define LED_NEOPIXEL_PIN 9
+  #define LED_MODE_BRIGHTNESS 10
+
+#elif defined(MALTRONICS)
+
+// ===== Reset ====== //
+  #define RESET_BUTTON 5
+
+// ===== LED ===== //
+  #define LED_DOTSTAR
+  #define LED_NUM 1
+  #define LED_DOTSTAR_CLK 12
+  #define LED_DOTSTAR_DATA 13
+  #define LED_MODE_BRIGHTNESS 255
+
+// ===== Web ===== //
+#define WEB_IP_ADDR (192, 168, 4, 2)
+#define WEB_URL "deauther.tools"
+
+#elif defined(DSTIKE_D_DUINO_B_V5_LED_RING)
+
+// ===== LED ===== //
+  #define LED_NEOPIXEL_GRB
+  #define LED_NUM 12
   #define LED_NEOPIXEL_PIN 15
 
 // ===== DISPLAY ===== //
@@ -76,7 +176,7 @@
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
 // ===== DISPLAY ===== //
@@ -94,14 +194,14 @@
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
 #elif defined(DSTIKE_DEAUTHER_OLED_V1_5_S)
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
 // ===== DISPLAY ===== //
@@ -154,7 +254,7 @@
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
 // ===== DISPLAY ===== //
@@ -171,7 +271,7 @@
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
   #define HIGHLIGHT_LED 16
@@ -192,14 +292,14 @@
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 4
 
-#elif defined(DSTIKE_DEAUTHER_WRISTBAND) || defined(DSTIKE_DEAUTHER_WATCH) || defined(DSTIKE_DEAUTHER_MINI)
+#elif defined(DSTIKE_DEAUTHER_WATCH) || defined(DSTIKE_DEAUTHER_MINI)
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
   #define HIGHLIGHT_LED 16
@@ -218,7 +318,7 @@
 
 // ===== LED ===== //
   #define LED_NEOPIXEL_GRB
-  #define LED_NEOPIXEL_NUM 1
+  #define LED_NUM 1
   #define LED_NEOPIXEL_PIN 15
 
   #define HIGHLIGHT_LED 16
@@ -246,7 +346,7 @@
  #define LED_MODE_IDLE 0, 255, 0
  #define LED_MODE_BRIGHTNESS 10
 
- #define LED_MY92_NUM 1
+ #define LED_NUM 1
  #define LED_MY92_DATA 4
  #define LED_MY92_CLK 5
  #define LED_MY92_CH_R 0
@@ -266,7 +366,7 @@
  #define LED_MODE_IDLE 0, 255, 0
  #define LED_MODE_BRIGHTNESS 10
 
- #define LED_MY92_NUM 1
+ #define LED_NUM 1
  #define LED_MY92_DATA 13
  #define LED_MY92_CLK 15
  #define LED_MY92_CH_R 0
@@ -275,11 +375,11 @@
  #define LED_MY92_CH_BRIGHTNESS 3
  #define LED_MY92_MODEL MY92XX_MODEL_MY9291
 
-#elif defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER) || defined(DSTIKE_NODEMCU_07) || defined(DSTIKE_DEAUTHER) || defined(DSTIKE_DEAUTHER_V1) || defined(DSTIKE_DEAUTHER_V2) || defined(DSTIKE_DEAUTHER_V3)
+#elif defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER) || defined(DSTIKE_NODEMCU_07) || defined(DSTIKE_DEAUTHER_V1) || defined(DSTIKE_DEAUTHER_V2) || defined(DSTIKE_DEAUTHER_V3)
 // ===== LED ===== //
-   #define LED_DIGITAL
-   #define LED_PIN_R 16 // NodeMCU on-board LED
-   #define LED_PIN_B 2  // ESP-12 LED
+// #define LED_DIGITAL
+// #define LED_PIN_R 16 // NodeMCU on-board LED
+// #define LED_PIN_B 2  // ESP-12 LED
 
 #endif /* if defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER) || defined(DSTIKE_NODEMCU_07) || defined(DSTIKE_DEAUTHER) || defined(DSTIKE_DEAUTHER_V1) || defined(DSTIKE_DEAUTHER_V2) || defined(DSTIKE_DEAUTHER_V3) */
 // ============================== //
@@ -334,10 +434,6 @@
   #define MIN_DEAUTH_FRAMES 3
 #endif /* ifndef MIN_DEAUTH_FRAMES */
 
-#ifndef DEFAULT_SSID
-  #define DEFAULT_SSID "pwned"
-#endif /* ifndef DEFAULT_SSID */
-
 // ===== ACCESS POINT ===== //
 #ifndef AP_SSID
   #define AP_SSID "pwned"
@@ -386,12 +482,12 @@
   #define LED_NEOPIXEL
 #endif /* if defined(LED_NEOPIXEL_RGB) || defined(LED_NEOPIXEL_GRB) */
 
-#if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(MY92)
+#if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(LED_MY92) && !defined(LED_DOTSTAR)
   #define LED_DIGITAL
   #define USE_LED false
-#else /* if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(MY92) */
+#else // if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(LED_MY92) && !defined(LED_DOTSTAR)
   #define USE_LED true
-#endif /* if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(MY92) */
+#endif // if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(LED_MY92) && !defined(LED_DOTSTAR)
 
 #ifndef LED_PIN_R
   #define LED_PIN_R 255
@@ -491,12 +587,30 @@
   #define BUTTON_B 255
 #endif // ifndef BUTTON_B
 
+// ===== Reset ====== //
+#ifndef RESET_BUTTON
+  #if BUTTON_UP != 0 && BUTTON_DOWN != 0 && BUTTON_A != 0 && BUTTON_B != 0
+    #define RESET_BUTTON 0
+  #else // if BUTTON_UP != 0 && BUTTON_DOWN != 0 && BUTTON_A != 0 && BUTTON_B != 0
+    #define RESET_BUTTON 255
+  #endif // if BUTTON_UP != 0 && BUTTON_DOWN != 0 && BUTTON_A != 0 && BUTTON_B != 0
+#endif // ifndef RESET_BUTTON
+
+// ===== Web ===== //
+#ifndef WEB_IP_ADDR
+  #define WEB_IP_ADDR (192, 168, 4, 1)
+#endif // ifndef WEB_IP_ADDR
+
+#ifndef WEB_URL
+  #define WEB_URL "deauth.me"
+#endif // ifndef WEB_URL
+
 // ======== CONSTANTS ========== //
 // Do not change these values unless you know what you're doing!
-#define DEAUTHER_VERSION "2.5.0"
+#define DEAUTHER_VERSION "2.6.1"
 #define DEAUTHER_VERSION_MAJOR 2
-#define DEAUTHER_VERSION_MINOR 5
-#define DEAUTHER_VERSION_REVISION 0
+#define DEAUTHER_VERSION_MINOR 6
+#define DEAUTHER_VERSION_REVISION 1
 
 #define EEPROM_SIZE 4095
 #define BOOT_COUNTER_ADDR 1
@@ -551,7 +665,7 @@
  #define LED_NEOPIXEL_RGB
  #define LED_NEOPIXEL_GRB
 
- #define LED_NEOPIXEL_NUM 1
+ #define LED_NUM 1
  #define LED_NEOPIXEL_PIN 255
 
  #define LED_MODE_OFF 0,0,0
@@ -560,7 +674,7 @@
  #define LED_MODE_IDLE 0,255,0
  #define LED_MODE_BRIGHTNESS 10
 
- #define LED_MY92_NUM 1
+ #define LED_NUM 1
  #define LED_MY92_DATA 4
  #define LED_MY92_CLK 5
  #define LED_MY92_CH_R 0
@@ -570,6 +684,11 @@
  #define LED_MY92_MODEL MY92XX_MODEL_MY9291
  #define LED_MY92_MODEL MY92XX_MODEL_MY9231
 
+ #define LED_DOTSTAR
+ #define LED_NUM 1
+ #define LED_DOTSTAR_CLK 12
+ #define LED_DOTSTAR_DATA 13
+
    // ===== DISPLAY ===== //
  #define USE_DISPLAY false
  #define DISPLAY_TIMEOUT 600
@@ -594,11 +713,18 @@
  #define BUTTON_A 255
  #define BUTTON_B 255
 
+   // ===== Reset ====== //
+ #define RESET_BUTTON 5
+
+
+   // ===== Web ===== //
+ #define WEB_IP_ADDR (192, 168, 4, 1)
+ #define WEB_URL "deauth.me"
+
  */
 
+
 // ========== ERROR CHECKS ========== //
 #if LED_MODE_BRIGHTNESS == 0
 #error LED_MODE_BRIGHTNESS must not be zero!
-#endif /* if LED_MODE_BRIGHTNESS == 0 */
-
-#endif /* ifndef config_h */
+#endif /* if LED_MODE_BRIGHTNESS == 0 */

esp8266_deauther/Accesspoints.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "Accesspoints.h"
 
 Accesspoints::Accesspoints() {
@@ -170,6 +172,7 @@ String Accesspoints::getMacStr(int num) {
     if (!check(num)) return String();
 
     uint8_t* mac = getMac(num);
+
     return bytesToStr(mac, 6);
 }
 

esp8266_deauther/Accesspoints.h

@@ -1,5 +1,6 @@
-#ifndef Accesspoints_h
-#define Accesspoints_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 #include <ESP8266WiFi.h>
@@ -76,6 +77,4 @@ class Accesspoints {
         void internal_select(int num);
         void internal_deselect(int num);
         void internal_remove(int num);
-};
-
-#endif // ifndef Accesspoints_h
+};

esp8266_deauther/Attack.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "Attack.h"
 
 #include "settings.h"
@@ -67,6 +69,9 @@ void Attack::stop() {
         deauth.tc            = 0;
         beacon.tc            = 0;
         probe.tc             = 0;
+        deauth.active        = false;
+        beacon.active        = false;
+        probe.active         = false;
         prntln(A_STOP);
     }
 }
@@ -242,7 +247,7 @@ void Attack::deauthAllUpdate() {
 void Attack::probeUpdate() {
     if (probe.active && (probe.maxPkts > 0) && (probe.packetCounter < probe.maxPkts)) {
         if (probe.time <= currentTime - (1000 / probe.maxPkts)) {
-            if (settings::getAttackSettings().attack_all_ch) setWifiChannel(probe.tc % 11);
+            if (settings::getAttackSettings().attack_all_ch) setWifiChannel(probe.tc % 11, true);
             probe.tc += sendProbe(probe.tc);
 
             if (probe.tc >= ssids.count()) probe.tc = 0;
@@ -285,11 +290,11 @@ bool Attack::deauthDevice(uint8_t* apMac, uint8_t* stMac, uint8_t reason, uint8_
 
     // build deauth packet
     packetSize = sizeof(deauthPacket);
-    
+
     uint8_t deauthpkt[packetSize];
 
     memcpy(deauthpkt, deauthPacket, packetSize);
-    
+
     memcpy(&deauthpkt[4], stMac, 6);
     memcpy(&deauthpkt[10], apMac, 6);
     memcpy(&deauthpkt[16], apMac, 6);
@@ -298,18 +303,19 @@ bool Attack::deauthDevice(uint8_t* apMac, uint8_t* stMac, uint8_t reason, uint8_
     // send deauth frame
     deauthpkt[0] = 0xc0;
 
-    if (sendPacket(deauthpkt, packetSize, ch, 1)) {
+    if (sendPacket(deauthpkt, packetSize, ch, true)) {
         success = true;
         deauth.packetCounter++;
     }
 
     // send disassociate frame
     uint8_t disassocpkt[packetSize];
+
     memcpy(disassocpkt, deauthpkt, packetSize);
-    
+
     disassocpkt[0] = 0xa0;
 
-    if (sendPacket(disassocpkt, packetSize, ch, 1)) {
+    if (sendPacket(disassocpkt, packetSize, ch, false)) {
         success = true;
         deauth.packetCounter++;
     }
@@ -324,7 +330,7 @@ bool Attack::deauthDevice(uint8_t* apMac, uint8_t* stMac, uint8_t reason, uint8_
         // send deauth frame
         disassocpkt[0] = 0xc0;
 
-        if (sendPacket(disassocpkt, packetSize, ch, 1)) {
+        if (sendPacket(disassocpkt, packetSize, ch, false)) {
             success = true;
             deauth.packetCounter++;
         }
@@ -332,7 +338,7 @@ bool Attack::deauthDevice(uint8_t* apMac, uint8_t* stMac, uint8_t reason, uint8_
         // send disassociate frame
         disassocpkt[0] = 0xa0;
 
-        if (sendPacket(disassocpkt, packetSize, ch, 1)) {
+        if (sendPacket(disassocpkt, packetSize, ch, false)) {
             success = true;
             deauth.packetCounter++;
         }
@@ -344,7 +350,7 @@ bool Attack::deauthDevice(uint8_t* apMac, uint8_t* stMac, uint8_t reason, uint8_
 }
 
 bool Attack::sendBeacon(uint8_t tc) {
-    if (settings::getAttackSettings().attack_all_ch) setWifiChannel(tc % 11);
+    if (settings::getAttackSettings().attack_all_ch) setWifiChannel(tc % 11, true);
     mac[5] = tc;
     return sendBeacon(mac, ssids.getName(tc).c_str(), wifi_channel, ssids.getWPA2(tc));
 }
@@ -372,11 +378,12 @@ bool Attack::sendBeacon(uint8_t* mac, const char* ssid, uint8_t ch, bool wpa2) {
     // =====
     uint16_t tmpPacketSize = (packetSize - 32) + ssidLen;                // calc size
     uint8_t* tmpPacket     = new uint8_t[tmpPacketSize];                 // create packet buffer
+
     memcpy(&tmpPacket[0], &beaconPacket[0], 38 + ssidLen);               // copy first half of packet into buffer
     tmpPacket[37] = ssidLen;                                             // update SSID length byte
     memcpy(&tmpPacket[38 + ssidLen], &beaconPacket[70], wpa2 ? 39 : 13); // copy second half of packet into buffer
 
-    bool success = sendPacket(tmpPacket, tmpPacketSize, ch, 1);
+    bool success = sendPacket(tmpPacket, tmpPacketSize, ch, false);
 
     if (success) {
         beacon.time = currentTime;
@@ -390,7 +397,7 @@ bool Attack::sendBeacon(uint8_t* mac, const char* ssid, uint8_t ch, bool wpa2) {
 }
 
 bool Attack::sendProbe(uint8_t tc) {
-    if (settings::getAttackSettings().attack_all_ch) setWifiChannel(tc % 11);
+    if (settings::getAttackSettings().attack_all_ch) setWifiChannel(tc % 11, true);
     mac[5] = tc;
     return sendProbe(mac, ssids.getName(tc).c_str(), wifi_channel);
 }
@@ -404,7 +411,7 @@ bool Attack::sendProbe(uint8_t* mac, const char* ssid, uint8_t ch) {
     memcpy(&probePacket[10], mac, 6);
     memcpy(&probePacket[26], ssid, ssidLen);
 
-    if (sendPacket(probePacket, packetSize, ch, 1)) {
+    if (sendPacket(probePacket, packetSize, ch, false)) {
         probe.time = currentTime;
         probe.packetCounter++;
         return true;
@@ -413,19 +420,16 @@ bool Attack::sendProbe(uint8_t* mac, const char* ssid, uint8_t ch) {
     return false;
 }
 
-bool Attack::sendPacket(uint8_t* packet, uint16_t packetSize, uint8_t ch, uint16_t tries) {
+bool Attack::sendPacket(uint8_t* packet, uint16_t packetSize, uint8_t ch, bool force_ch) {
     // Serial.println(bytesToStr(packet, packetSize));
 
     // set channel
-    setWifiChannel(ch);
+    setWifiChannel(ch, force_ch);
 
     // sent out packet
     bool sent = wifi_send_pkt_freedom(packet, packetSize, 0) == 0;
 
-    // try again until it's sent out
-    for (int i = 0; i < tries && !sent; i++) sent = wifi_send_pkt_freedom(packet, packetSize, 0) == 0;
-
-    if (sent) tmpPacketRate++;
+    if (sent) ++tmpPacketRate;
 
     return sent;
 }

esp8266_deauther/Attack.h

@@ -1,5 +1,6 @@
-#ifndef Attack_h
-#define Attack_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 #include <ESP8266WiFi.h>
@@ -12,7 +13,7 @@ extern "C" {
 #include "SSIDs.h"
 #include "Scan.h"
 
-extern SSIDs    ssids;
+extern SSIDs ssids;
 extern Accesspoints accesspoints;
 extern Stations     stations;
 extern Scan scan;
@@ -26,7 +27,7 @@ extern void getRandomMac(uint8_t* mac);
 extern void setOutputPower(float dBm);
 extern String macToStr(const uint8_t* mac);
 extern String bytesToStr(const uint8_t* b, uint32_t size);
-extern void setWifiChannel(uint8_t ch);
+extern void setWifiChannel(uint8_t ch, bool force);
 extern bool writeFile(String path, String& buf);
 extern int8_t free80211_send(uint8_t* buffer, uint16_t len);
 
@@ -55,7 +56,7 @@ class Attack {
         bool sendProbe(uint8_t tc);
         bool sendProbe(uint8_t* mac, const char* ssid, uint8_t ch);
 
-        bool sendPacket(uint8_t* packet, uint16_t packetSize, uint8_t ch, uint16_t tries);
+        bool sendPacket(uint8_t* packet, uint16_t packetSize, uint8_t ch, bool force_ch);
 
         bool isRunning();
 
@@ -151,16 +152,16 @@ class Attack {
         };
 
         uint8_t beaconPacket[109] = {
-            /*  0 - 3  */ 0x80,   0x00,                 0x00,                 0x00,                         // Type/Subtype: managment beacon frame
-            /*  4 - 9  */ 0xFF,   0xFF,                 0xFF,                 0xFF, 0xFF, 0xFF,             // Destination: broadcast
-            /* 10 - 15 */ 0x01,   0x02,                 0x03,                 0x04, 0x05, 0x06,             // Source
-            /* 16 - 21 */ 0x01,   0x02,                 0x03,                 0x04, 0x05, 0x06,             // Source
+            /*  0 - 3  */ 0x80,   0x00,                 0x00,                 0x00,                                                                         // Type/Subtype: managment beacon frame
+            /*  4 - 9  */ 0xFF,   0xFF,                 0xFF,                 0xFF,                 0xFF,                 0xFF,                             // Destination: broadcast
+            /* 10 - 15 */ 0x01,   0x02,                 0x03,                 0x04,                 0x05,                 0x06,                             // Source
+            /* 16 - 21 */ 0x01,   0x02,                 0x03,                 0x04,                 0x05,                 0x06,                             // Source
 
             // Fixed parameters
-            /* 22 - 23 */ 0x00,   0x00,                                                                     // Fragment & sequence number (will be done by the SDK)
-            /* 24 - 31 */ 0x83,   0x51,                 0xf7,                 0x8f, 0x0f, 0x00, 0x00, 0x00, // Timestamp
-            /* 32 - 33 */ 0xe8,   0x03,                                                                     // Interval: 0x64, 0x00 => every 100ms - 0xe8, 0x03 => every 1s
-            /* 34 - 35 */ 0x31,   0x00,                                                                     // capabilities Tnformation
+            /* 22 - 23 */ 0x00,   0x00,                                                                                                                     // Fragment & sequence number (will be done by the SDK)
+            /* 24 - 31 */ 0x83,   0x51,                 0xf7,                 0x8f,                 0x0f,                 0x00,                 0x00, 0x00, // Timestamp
+            /* 32 - 33 */ 0x64,   0x00,                                                                                                                     // Interval: 0x64, 0x00 => every 100ms - 0xe8, 0x03 => every 1s
+            /* 34 - 35 */ 0x31,   0x00,                                                                                                                     // capabilities Tnformation
 
             // Tagged parameters
 
@@ -195,11 +196,9 @@ class Attack {
             /*  85 -  86 */ 0x01, 0x00,
             /*  87 -  90 */ 0x00, 0x0f,                 0xac,                 0x02,
             /*  91 -  92 */ 0x02, 0x00,
-            /*  93 - 100 */ 0x00, 0x0f,                 0xac,                 0x04, 0x00, 0x0f, 0xac, 0x04, /*Fix: changed 0x02(TKIP) to 0x04(CCMP) is default. WPA2 with TKIP not supported by many devices*/
+            /*  93 - 100 */ 0x00, 0x0f,                 0xac,                 0x04,                 0x00,                 0x0f,                 0xac, 0x04, /*Fix: changed 0x02(TKIP) to 0x04(CCMP) is default. WPA2 with TKIP not supported by many devices*/
             /* 101 - 102 */ 0x01, 0x00,
             /* 103 - 106 */ 0x00, 0x0f,                 0xac,                 0x02,
             /* 107 - 108 */ 0x00, 0x00
         };
-};
-
-#endif // ifndef Attack_h
+};

esp8266_deauther/CLI.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "CLI.h"
 
 #include <LittleFS.h>
@@ -283,7 +285,6 @@ void CLI::runCommand(String input) {
         prntln(CLI_HELP_SEND_PROBE);
         prntln(CLI_HELP_LED_A);
         prntln(CLI_HELP_LED_B);
-        prntln(CLI_HELP_LED_ENABLE);
         prntln(CLI_HELP_DRAW);
         prntln(CLI_HELP_SCREEN_ON);
         prntln(CLI_HELP_SCREEN_MODE);
@@ -1078,7 +1079,7 @@ void CLI::runCommand(String input) {
         for (int i = 0; i < packetSize; i++) packet[i] = strtoul((packetStr.substring(i * 2,
                                                                                       i * 2 + 2)).c_str(), NULL, 16);
 
-        if (attack.sendPacket(packet, packetSize, wifi_channel, 10)) {
+        if (attack.sendPacket(packet, packetSize, wifi_channel, true)) {
             prntln(CLI_CUSTOM_SENT);
             counter++;
         } else {
@@ -1086,6 +1087,21 @@ void CLI::runCommand(String input) {
         }
     }
 
+    // ===== LED ===== //
+    // led <r> <g> <b> [<brightness>]
+    else if ((list->size() == 4) && eqlsCMD(0, CLI_LED)) {
+        led::setColor(list->get(1).toInt(), list->get(2).toInt(), list->get(3).toInt());
+    }
+
+    // led <#rrggbb> [<brightness>]
+    else if ((list->size() == 2) &&
+             eqlsCMD(0, CLI_LED) && (list->get(1).charAt(0) == HASHSIGN)) {
+        uint8_t c[3];
+        strToColor(list->get(1), c);
+
+        led::setColor(c[0], c[1], c[2]);
+    }
+
     // ===== DELAY ===== //
     else if ((list->size() == 2) && eqlsCMD(0, CLI_DELAY)) {
         uint32_t endTime = currentTime + getTime(list->get(1));
@@ -1094,11 +1110,11 @@ void CLI::runCommand(String input) {
             // ------- loop function ----- //
             currentTime = millis();
 
-            wifi::update();    // manage access point
+            wifi::update();  // manage access point
             scan.update();   // run scan
             attack.update(); // run attacks
             ssids.update();  // run random mode, if enabled
-            led::update();    // update LED color
+            led::update();   // update LED color
 
             // auto-save
             if (settings::getAutosaveSettings().enabled && (currentTime - autosaveTime > settings::getAutosaveSettings().time)) {
@@ -1229,10 +1245,10 @@ void CLI::runCommand(String input) {
     // ===== SCREEN ===== //
     // screen mode <menu/packetmonitor/buttontest/loading>
     else if (eqlsCMD(0, CLI_SCREEN) && eqlsCMD(1, CLI_MODE)) {
-        if (eqlsCMD(2, CLI_MODE_BUTTONTEST)) displayUI.mode = displayUI.DISPLAY_MODE::BUTTON_TEST;
-        else if (eqlsCMD(2, CLI_MODE_PACKETMONITOR)) displayUI.mode = displayUI.DISPLAY_MODE::PACKETMONITOR;
-        else if (eqlsCMD(2, CLI_MODE_LOADINGSCREEN)) displayUI.mode = displayUI.DISPLAY_MODE::LOADSCAN;
-        else if (eqlsCMD(2, CLI_MODE_MENU)) displayUI.mode = displayUI.DISPLAY_MODE::MENU;
+        if (eqlsCMD(2, CLI_MODE_BUTTONTEST)) displayUI.mode = DISPLAY_MODE::BUTTON_TEST;
+        else if (eqlsCMD(2, CLI_MODE_PACKETMONITOR)) displayUI.mode = DISPLAY_MODE::PACKETMONITOR;
+        else if (eqlsCMD(2, CLI_MODE_LOADINGSCREEN)) displayUI.mode = DISPLAY_MODE::LOADSCAN;
+        else if (eqlsCMD(2, CLI_MODE_MENU)) displayUI.mode = DISPLAY_MODE::MENU;
         else parameterError(list->get(2));
         prntln(CLI_CHANGED_SCREEN);
     }

esp8266_deauther/CLI.h

@@ -1,5 +1,6 @@
-#ifndef CLI_h
-#define CLI_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 #include <ESP8266WiFi.h>
@@ -16,8 +17,8 @@ extern "C" {
 #include "DisplayUI.h"
 #include "led.h"
 
-extern Names    names;
-extern SSIDs    ssids;
+extern Names names;
+extern SSIDs ssids;
 extern Accesspoints accesspoints;
 extern Stations     stations;
 extern Scan   scan;
@@ -64,8 +65,8 @@ class CLI {
     private:
         bool enabled = false;
 
-        SimpleList<String>*list;
-        SimpleList<String>*queue;
+        SimpleList<String>* list;
+        SimpleList<String>* queue;
 
         bool delayed            = false;
         uint32_t delayTime      = 0;
@@ -85,6 +86,4 @@ class CLI {
         int toInt(String str);
         uint32_t getTime(String time);
         bool eqlsCMD(int i, const char* keyword);
-};
-
-#endif // ifndef CLI_h
+};

esp8266_deauther/DisplayUI.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "DisplayUI.h"
 
 #include "settings.h"
@@ -69,10 +71,10 @@ void DisplayUI::setup() {
     clock.setClockMode(false);
     clockHour   = clock.getHour(h12, PM_time);
     clockMinute = clock.getMinute();
-#else
+#else // ifdef RTC_DS3231
     clockHour   = random(12);
     clockMinute = random(60);
-#endif
+#endif // ifdef RTC_DS3231
 
     // ===== MENUS ===== //
 
@@ -85,15 +87,10 @@ void DisplayUI::setup() {
             scan.start(SCAN_MODE_SNIFFER, 0, SCAN_MODE_OFF, 0, false, wifi_channel);
             mode = DISPLAY_MODE::PACKETMONITOR;
         });
-
-        addMenuNode(&mainMenu, D_CLOCK, [this]() { // PACKET MONITOR
-            mode = DISPLAY_MODE::CLOCK;
-            display.setFont(ArialMT_Plain_24);
-            display.setTextAlignment(TEXT_ALIGN_CENTER);
-        });
+        addMenuNode(&mainMenu, D_CLOCK, &clockMenu); // CLOCK
 
 #ifdef HIGHLIGHT_LED
-        addMenuNode(&mainMenu, D_LED, [this]() { // LED
+        addMenuNode(&mainMenu, D_LED, [this]() {     // LED
             highlightLED = !highlightLED;
             digitalWrite(HIGHLIGHT_LED, highlightLED);
         });
@@ -444,6 +441,20 @@ void DisplayUI::setup() {
         });
     });
 
+    // CLOCK MENU
+    createMenu(&clockMenu, &mainMenu, [this]() {
+        addMenuNode(&clockMenu, D_CLOCK_DISPLAY, [this]() { // CLOCK
+            mode = DISPLAY_MODE::CLOCK_DISPLAY;
+            display.setFont(ArialMT_Plain_24);
+            display.setTextAlignment(TEXT_ALIGN_CENTER);
+        });
+        addMenuNode(&clockMenu, D_CLOCK_SET, [this]() { // CLOCK SET TIME
+            mode = DISPLAY_MODE::CLOCK;
+            display.setFont(ArialMT_Plain_24);
+            display.setTextAlignment(TEXT_ALIGN_CENTER);
+        });
+    });
+
     // ===================== //
 
     // set current menu to main menu
@@ -461,7 +472,7 @@ void DisplayUI::setupLED() {
 
 #endif // ifdef HIGHLIGHT_LED
 
-void DisplayUI::update() {
+void DisplayUI::update(bool force) {
     if (!enabled) return;
 
     up->update();
@@ -469,7 +480,7 @@ void DisplayUI::update() {
     a->update();
     b->update();
 
-    draw();
+    draw(force);
 
     uint32_t timeout = settings::getDisplaySettings().timeout * 1000;
 
@@ -521,7 +532,7 @@ void DisplayUI::setupButtons() {
                 else currentMenu->selected = currentMenu->list->size() - 1;
             } else if (mode == DISPLAY_MODE::PACKETMONITOR) { // when in packet monitor, change channel
                 scan.setChannel(wifi_channel + 1);
-            } else if (mode == DISPLAY_MODE::CLOCK) {         // when in packet monitor, change channel
+            } else if (mode == DISPLAY_MODE::CLOCK) {         // when in clock, change time
                 setTime(clockHour, clockMinute + 1, clockSecond);
             }
         }
@@ -537,7 +548,7 @@ void DisplayUI::setupButtons() {
                 else currentMenu->selected = currentMenu->list->size() - 1;
             } else if (mode == DISPLAY_MODE::PACKETMONITOR) { // when in packet monitor, change channel
                 scan.setChannel(wifi_channel + 1);
-            } else if (mode == DISPLAY_MODE::CLOCK) {         // when in packet monitor, change channel
+            } else if (mode == DISPLAY_MODE::CLOCK) {         // when in clock, change time
                 setTime(clockHour, clockMinute + 10, clockSecond);
             }
         }
@@ -554,7 +565,7 @@ void DisplayUI::setupButtons() {
                 else currentMenu->selected = 0;
             } else if (mode == DISPLAY_MODE::PACKETMONITOR) { // when in packet monitor, change channel
                 scan.setChannel(wifi_channel - 1);
-            } else if (mode == DISPLAY_MODE::CLOCK) {         // when in packet monitor, change channel
+            } else if (mode == DISPLAY_MODE::CLOCK) {         // when in clock, change time
                 setTime(clockHour, clockMinute - 1, clockSecond);
             }
         }
@@ -572,7 +583,7 @@ void DisplayUI::setupButtons() {
                 scan.setChannel(wifi_channel - 1);
             }
 
-            else if (mode == DISPLAY_MODE::CLOCK) { // when in packet monitor, change channel
+            else if (mode == DISPLAY_MODE::CLOCK) {           // when in clock, change time
                 setTime(clockHour, clockMinute - 10, clockSecond);
             }
         }
@@ -599,6 +610,7 @@ void DisplayUI::setupButtons() {
                     break;
 
                 case DISPLAY_MODE::CLOCK:
+                case DISPLAY_MODE::CLOCK_DISPLAY:
                     mode = DISPLAY_MODE::MENU;
                     display.setFont(DejaVu_Sans_Mono_12);
                     display.setTextAlignment(TEXT_ALIGN_LEFT);
@@ -654,18 +666,24 @@ String DisplayUI::getChannel() {
     return ch;
 }
 
-void DisplayUI::draw() {
-    if ((currentTime - drawTime > drawInterval) && currentMenu) {
+void DisplayUI::draw(bool force) {
+    if (force || ((currentTime - drawTime > drawInterval) && currentMenu)) {
         drawTime = currentTime;
 
         updatePrefix();
-        
-#ifndef RTC_DS3231
-        if (clockTime < currentTime - 1000) {
-            setTime(clockHour, clockMinute++, clockSecond + 1);
+
+#ifdef RTC_DS3231
+        bool h12;
+        bool PM_time;
+        clockHour   = clock.getHour(h12, PM_time);
+        clockMinute = clock.getMinute();
+        clockSecond = clock.getSecond();
+#else // ifdef RTC_DS3231
+        if (currentTime - clockTime >= 1000) {
+            setTime(clockHour, clockMinute, ++clockSecond);
             clockTime += 1000;
         }
-#endif
+#endif // ifdef RTC_DS3231
 
         switch (mode) {
             case DISPLAY_MODE::BUTTON_TEST:
@@ -685,14 +703,18 @@ void DisplayUI::draw() {
                 break;
 
             case DISPLAY_MODE::INTRO:
-                if (currentTime - startTime >= screenIntroTime) {
+                if (!scan.isScanning() && (currentTime - startTime >= screenIntroTime)) {
                     mode = DISPLAY_MODE::MENU;
                 }
                 drawIntro();
                 break;
             case DISPLAY_MODE::CLOCK:
+            case DISPLAY_MODE::CLOCK_DISPLAY:
                 drawClock();
                 break;
+            case DISPLAY_MODE::RESETTING:
+                drawResetting();
+                break;
         }
 
         updateSuffix();
@@ -786,8 +808,13 @@ void DisplayUI::drawIntro() {
     drawString(0, center(str(D_INTRO_0), maxLen));
     drawString(1, center(str(D_INTRO_1), maxLen));
     drawString(2, center(str(D_INTRO_2), maxLen));
-    drawString(3, center(str(D_INTRO_3), maxLen));
-    drawString(4, center(DEAUTHER_VERSION, maxLen));
+    drawString(3, center(DEAUTHER_VERSION, maxLen));
+    if (scan.isScanning()) {
+        if (currentTime - startTime >= screenIntroTime+4500) drawString(4, left(str(D_SCANNING_3), maxLen));
+        else if (currentTime - startTime >= screenIntroTime+3000) drawString(4, left(str(D_SCANNING_2), maxLen));
+        else if (currentTime - startTime >= screenIntroTime+1500) drawString(4, left(str(D_SCANNING_1), maxLen));
+        else if (currentTime - startTime >= screenIntroTime) drawString(4, left(str(D_SCANNING_0), maxLen));
+    }
 }
 
 void DisplayUI::drawClock() {
@@ -800,6 +827,10 @@ void DisplayUI::drawClock() {
     display.drawString(64, 20, clockTime);
 }
 
+void DisplayUI::drawResetting() {
+    drawString(2, center(str(D_RESETTING), maxLen));
+}
+
 void DisplayUI::clearMenu(Menu* menu) {
     while (menu->list->size() > 0) {
         menu->list->remove(0);
@@ -906,5 +937,5 @@ void DisplayUI::setTime(int h, int m, int s) {
     clock.setHour(clockHour);
     clock.setMinute(clockMinute);
     clock.setSecond(clockSecond);
-#endif
+#endif // ifdef RTC_DS3231
 }

esp8266_deauther/DisplayUI.h

@@ -1,5 +1,6 @@
-#ifndef DisplayUI_h
-#define DisplayUI_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "language.h"
 #include "A_config.h"
@@ -11,29 +12,29 @@
 // ===== adjustable ===== //
 #if defined(SSD1306_I2C)
   #include <Wire.h>
-  #include <SSD1306Wire.h>
+  #include "src/esp8266-oled-ssd1306-4.1.0/SSD1306Wire.h"
 #elif defined(SSD1306_SPI)
   #include <SPI.h>
-  #include <SSD1306Spi.h>
+  #include "src/esp8266-oled-ssd1306-4.1.0/SSD1306Spi.h"
 #elif defined(SH1106_I2C)
   #include <Wire.h>
-  #include <SH1106Wire.h>
+  #include "src/esp8266-oled-ssd1306-4.1.0/SH1106Wire.h"
 #elif defined(SH1106_SPI)
   #include <SPI.h>
-  #include <SH1106Spi.h>
+  #include "src/esp8266-oled-ssd1306-4.1.0/SH1106Spi.h"
 #endif /* if defined(SSD1306_I2C) */
 
 #ifdef RTC_DS3231
-#include <DS3231.h>
-#endif
+#include "src/DS3231-1.0.3/DS3231.h"
+#endif // ifdef RTC_DS3231
 
-#include <SimpleButton.h>
+#include "src/SimpleButton/SimpleButton.h"
 
 using namespace simplebutton;
 
 
-extern Names    names;
-extern SSIDs    ssids;
+extern Names names;
+extern SSIDs ssids;
 extern Accesspoints accesspoints;
 extern Stations     stations;
 extern Scan     scan;
@@ -47,10 +48,14 @@ extern String right(String a, int len);
 extern String leftRight(String a, String b, int len);
 extern String replaceUtf8(String str, String r);
 
-const char D_INTRO_0[] PROGMEM = "";
-const char D_INTRO_1[] PROGMEM = "ESP8266 Deauther";
-const char D_INTRO_2[] PROGMEM = "by @Spacehuhn";
-const char D_INTRO_3[] PROGMEM = DISPLAY_TEXT;
+const char D_INTRO_0[] PROGMEM = "ESP8266 Deauther";
+const char D_INTRO_1[] PROGMEM = "by @Spacehuhn";
+const char D_INTRO_2[] PROGMEM = DISPLAY_TEXT;
+const char D_RESETTING[] PROGMEM = "Resetting...";
+const char D_SCANNING_0[] PROGMEM = "> Scanning";
+const char D_SCANNING_1[] PROGMEM = "> Scanning.";
+const char D_SCANNING_2[] PROGMEM = "> Scanning..";
+const char D_SCANNING_3[] PROGMEM = "> Scanning...";
 
 struct MenuNode {
     std::function<String()>getStr; // function used to create the displayed string
@@ -59,18 +64,26 @@ struct MenuNode {
 };
 
 struct Menu {
-    SimpleList<MenuNode>*list;
-    Menu  * parentMenu;
-    uint8_t selected;
+    SimpleList<MenuNode>* list;
+    Menu                * parentMenu;
+    uint8_t               selected;
     std::function<void()> build; // function that is executed when button is clicked
 };
 
+enum class DISPLAY_MODE { OFF,
+                          BUTTON_TEST,
+                          MENU,
+                          LOADSCAN,
+                          PACKETMONITOR,
+                          INTRO,
+                          CLOCK,
+                          CLOCK_DISPLAY,
+                          RESETTING };
+
 class DisplayUI {
     public:
-        enum DISPLAY_MODE { OFF = 0, BUTTON_TEST = 1, MENU = 2, LOADSCAN = 3, PACKETMONITOR = 4, INTRO = 5, CLOCK = 6 };
-
-        uint8_t mode         = DISPLAY_MODE::MENU;
-        bool    highlightLED = false;
+        DISPLAY_MODE mode = DISPLAY_MODE::MENU;
+        bool highlightLED = false;
 
         Button* up   = NULL;
         Button* down = NULL;
@@ -88,10 +101,10 @@ class DisplayUI {
         SH1106Spi display = SH1106Spi(SPI_RES, SPI_DC, SPI_CS);
 #endif /* if defined(SSD1306_I2C) */
 
-        const uint8_t  maxLen          = 18;
-        const uint8_t  lineHeight      = 12;
-        const uint8_t  buttonDelay     = 250;
-        const uint8_t  drawInterval    = 100; // 100ms = 10 FPS
+        const uint8_t maxLen           = 18;
+        const uint8_t lineHeight       = 12;
+        const uint8_t buttonDelay      = 250;
+        const uint8_t drawInterval     = 100; // 100ms = 10 FPS
         const uint16_t scrollSpeed     = 500; // time interval in ms
         const uint16_t screenIntroTime = 2500;
         const uint16_t screenWidth     = 128;
@@ -115,7 +128,7 @@ class DisplayUI {
         void setupLED();
 #endif // ifdef HIGHLIGHT_LED
 
-        void update();
+        void update(bool force = false);
         void on();
         void off();
 
@@ -144,6 +157,7 @@ class DisplayUI {
         Menu scanMenu;
         Menu showMenu;
         Menu attackMenu;
+        Menu clockMenu;
 
         Menu apListMenu;
         Menu stationListMenu;
@@ -160,12 +174,13 @@ class DisplayUI {
         String getChannel();
 
         // draw functions
-        void draw();
+        void draw(bool force = false);
         void drawButtonTest();
         void drawMenu();
         void drawLoadingScan();
         void drawPacketMonitor();
         void drawIntro();
+        void drawResetting();
         void clearMenu(Menu* menu);
 
         // menu functions
@@ -191,7 +206,7 @@ class DisplayUI {
 
 #ifdef RTC_DS3231
         DS3231 clock;
-#endif
+#endif // ifdef RTC_DS3231
 };
 
 // ===== FONT ===== //
@@ -652,6 +667,4 @@ const uint8_t DejaVu_Sans_Mono_12[] PROGMEM = {
     0x00, 0x00, 0x60, 0x40, 0x80, 0x67, 0x08, 0x1C, 0x84, 0x03, 0x60,                   // 253
     0x00, 0x00, 0xFC, 0x7F, 0x20, 0x08, 0x20, 0x08, 0x20, 0x08, 0xC0, 0x07,             // 254
     0x00, 0x00, 0x60, 0x40, 0x88, 0x67, 0x00, 0x1C, 0x88, 0x03, 0x60                    // 255
-};
-
-#endif // ifndef DisplayUI_h
+};

esp8266_deauther/EEPROMHelper.h

@@ -1,5 +1,6 @@
-#ifndef EEPROMHELPER_H
-#define EEPROMHELPER_H
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 // ========== Includes ========== //
 #include <EEPROM.h>
@@ -58,6 +59,4 @@ class EEPROMHelper {
             for (unsigned long i = 0; i<size; i++) EEPROM.write(i, 0x00);
             EEPROM.commit();
         }
-};
-
-#endif /* ifndef EEPROMHELPER_H */
+};

esp8266_deauther/Names.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "Names.h"
 
 #include <LittleFS.h>
@@ -258,6 +260,7 @@ void Names::setMac(int num, String macStr) {
     if (!check(num)) return;
 
     uint8_t mac[6];
+
     strToMac(macStr, mac);
     internal_add(mac, getName(num), getBssid(num), getCh(num), getSelected(num));
     prntln(N_CHANGED_MAC);
@@ -280,6 +283,7 @@ void Names::setBSSID(int num, String bssidStr) {
     if (!check(num)) return;
 
     uint8_t mac[6];
+
     strToMac(bssidStr, mac);
     internal_add(getMac(num), getName(num), mac, getCh(num), getSelected(num));
     prntln(N_CHANGED_BSSID);
@@ -362,6 +366,7 @@ String Names::getMacStr(int num) {
     if (!check(num)) return String();
 
     uint8_t* mac = getMac(num);
+
     return bytesToStr(mac, 6);
 }
 
@@ -471,6 +476,7 @@ void Names::internal_add(uint8_t* mac, String name, uint8_t* bssid, uint8_t ch,
     if ((ch < 1) || (ch > 14)) ch = 1;
 
     Device newDevice;
+
     newDevice.mac      = deviceMac;
     newDevice.name     = deviceName;
     newDevice.apBssid  = deviceBssid;

esp8266_deauther/Names.h

@@ -1,16 +1,17 @@
-#ifndef Names_h
-#define Names_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include <ESP8266WiFi.h>
 extern "C" {
   #include "user_interface.h"
 }
-#include "ArduinoJson.h"
+#include "src/ArduinoJson-v5.13.5/ArduinoJson.h"
 #include "language.h"
 #include "SimpleList.h"
 
 #define NAME_LIST_SIZE 25
-#define NAME_MAX_LENGTH 16
+#define NAME_MAX_LENGTH 17
 
 extern void checkFile(String path, String data);
 extern JsonVariant parseJSONFile(String path, DynamicJsonBuffer& jsonBuffer);
@@ -97,6 +98,4 @@ class Names {
         void internal_add(String macStr, String name, String bssidStr, uint8_t ch, bool selected);
         void internal_remove(int num);
         void internal_removeAll();
-};
-
-#endif // ifndef Names_h
+};

esp8266_deauther/SSIDs.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "SSIDs.h"
 
 #include <LittleFS.h>
@@ -42,6 +44,7 @@ void SSIDs::save(bool force) {
     if (!force && !changed) return;
 
     String buf = String();                              // create buffer
+
     buf += String(OPEN_CURLY_BRACKET) + String(DOUBLEQUOTES) + str(SS_JSON_RANDOM) + String(DOUBLEQUOTES) + String(
         DOUBLEPOINT) + b2s(randomMode) + String(COMMA); // {"random":false,
     buf += String(DOUBLEQUOTES) + str(SS_JSON_SSIDS) + String(DOUBLEQUOTES) + String(DOUBLEPOINT) +
@@ -233,6 +236,7 @@ void SSIDs::replace(int num, String name, bool wpa2) {
 
     if (len > 32) len = 32;
     SSID newSSID;
+
     newSSID.name = randomize(name);
     newSSID.wpa2 = wpa2;
     newSSID.len  = (uint8_t)len;
@@ -301,6 +305,7 @@ void SSIDs::internal_add(String name, bool wpa2, int len) {
     name = fixUtf8(name);
 
     SSID newSSID;
+
     newSSID.name = name;
     newSSID.wpa2 = wpa2;
     newSSID.len  = (uint8_t)len;
@@ -314,4 +319,4 @@ void SSIDs::internal_remove(int num) {
 
 void SSIDs::internal_removeAll() {
     list->clear();
-}
+}

esp8266_deauther/SSIDs.h

@@ -1,12 +1,13 @@
-#ifndef SSIDs_h
-#define SSIDs_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 #include <ESP8266WiFi.h>
 extern "C" {
   #include "user_interface.h"
 }
-#include "ArduinoJson.h"
+#include "src/ArduinoJson-v5.13.5/ArduinoJson.h"
 #include "language.h"
 #include "SimpleList.h"
 #include "Accesspoints.h"
@@ -80,6 +81,4 @@ class SSIDs {
         void internal_add(String name, bool wpa2, int add);
         void internal_remove(int num);
         void internal_removeAll();
-};
-
-#endif // ifndef SSIDs_h
+};

esp8266_deauther/Scan.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "Scan.h"
 
 #include "settings.h"
@@ -59,7 +61,7 @@ void Scan::start(uint8_t mode, uint32_t time, uint8_t nextmode, uint32_t continu
                  uint8_t channel) {
     if (mode != SCAN_MODE_OFF) stop();
 
-    setWifiChannel(channel);
+    setWifiChannel(channel, true);
     Scan::continueStartTime  = currentTime;
     Scan::snifferPacketTime  = continueStartTime;
     Scan::snifferOutputTime  = continueStartTime;
@@ -237,7 +239,7 @@ void Scan::setChannel(uint8_t ch) {
     else if (ch < 1) ch = 14;
 
     wifi_promiscuous_enable(0);
-    setWifiChannel(ch);
+    setWifiChannel(ch, true);
     wifi_promiscuous_enable(1);
 }
 

esp8266_deauther/Scan.h

@@ -1,5 +1,6 @@
-#ifndef Scan_h
-#define Scan_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 #include "Accesspoints.h"
@@ -23,9 +24,9 @@ extern Stations     stations;
 extern Names names;
 extern SSIDs ssids;
 
-extern uint8_t  wifiMode;
+extern uint8_t wifiMode;
 
-extern void setWifiChannel(uint8_t ch);
+extern void setWifiChannel(uint8_t ch, bool force);
 extern bool appendFile(String path, String& buf);
 extern bool writeFile(String path, String& buf);
 extern void readFileToSerial(const String path);
@@ -90,6 +91,4 @@ class Scan {
         int findAccesspoint(uint8_t* mac);
 
         String FILE_PATH = "/scan.json";
-};
-
-#endif // ifndef Scan_h
+};

esp8266_deauther/SimpleList.h

@@ -1,12 +1,6 @@
-#ifndef SimpleList_h
-#define SimpleList_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
 
-/*
-   ===========================================
-      Copyright (c) 2018 Stefan Kremser
-             github.com/spacehuhn
-   ===========================================
- */
+#pragma once
 
 #include <type_traits>
 #include <cstddef>
@@ -166,6 +160,7 @@ void SimpleList<T>::add(int index, T obj) {
     }
 
     SimpleListNode<T>* newNode = new SimpleListNode<T>();
+
     newNode->data = obj;
 
     if (index == 0) {
@@ -191,6 +186,7 @@ void SimpleList<T>::insert(T obj) {
 
     // create new node
     SimpleListNode<T>* newNode = new SimpleListNode<T>();
+
     newNode->data = obj;
 
     if (listSize == 0) {
@@ -516,6 +512,4 @@ void SimpleList<T>::sort() {
     }
 
     this->sorted = true;
-}
-
-#endif // ifndef SimpleList_h
+}

esp8266_deauther/Stations.cpp

@@ -1,3 +1,5 @@
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "Stations.h"
 
 Stations::Stations() {
@@ -133,6 +135,7 @@ String Stations::getAPMacStr(int num) {
     if (!check(num)) return String();
 
     uint8_t* mac = getAPMac(num);
+
     return bytesToStr(mac, 6);
 }
 
@@ -164,6 +167,7 @@ String Stations::getMacStr(int num) {
     if (!check(num)) return String();
 
     uint8_t* mac = getMac(num);
+
     return bytesToStr(mac, 6);
 }
 
@@ -256,7 +260,7 @@ void Stations::remove(int num) {
 
     prnt(ST_REMOVED_STATION);
     prntln(num);
-    
+
     internal_remove(num);
     changed = true;
 }
@@ -342,6 +346,7 @@ void Stations::internal_add(uint8_t* mac, int accesspointNum) {
     if (count() >= STATION_LIST_SIZE) removeOldest();
 
     Station newStation;
+
     newStation.ap       = accesspointNum;
     newStation.ch       = wifi_channel;
     newStation.mac      = (uint8_t*)malloc(6);
@@ -365,4 +370,4 @@ void Stations::internal_removeAll() {
         free(getTime(i));
     }
     list->clear();
-}
+}

esp8266_deauther/Stations.h

@@ -1,5 +1,6 @@
-#ifndef Stations_h
-#define Stations_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 extern "C" {
@@ -93,6 +94,4 @@ class Stations {
         void internal_add(uint8_t* mac, int accesspointNum);
         void internal_remove(int num);
         void internal_removeAll();
-};
-
-#endif // ifndef Stations_h
+};

esp8266_deauther/debug.h

@@ -1,8 +1,4 @@
-/*
-   Copyright (c) 2020 Stefan Kremser (@Spacehuhn)
-   This software is licensed under the MIT License. See the license file for details.
-   Source: github.com/spacehuhn/esp8266_deauther
- */
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
 
 #pragma once
 

esp8266_deauther/esp8266_deauther.ino

@@ -1,9 +1,7 @@
-/*
-   ===========================================
-      Copyright (c) 2018 Stefan Kremser
-             github.com/spacehuhn
-   ===========================================
- */
+/* =====================
+   This software is licensed under the MIT License:
+   https://github.com/spacehuhntech/esp8266_deauther
+   ===================== */
 
 extern "C" {
     // Please follow this tutorial:
@@ -14,7 +12,7 @@ extern "C" {
 
 #include "EEPROMHelper.h"
 
-#include <ArduinoJson.h>
+#include "src/ArduinoJson-v5.13.5/ArduinoJson.h"
 #if ARDUINOJSON_VERSION_MAJOR != 5
 // The software was build using ArduinoJson v5.x
 // version 6 is still in beta at the time of writing
@@ -37,8 +35,8 @@ extern "C" {
 #include "led.h"
 
 // Run-Time Variables //
-Names    names;
-SSIDs    ssids;
+Names names;
+SSIDs ssids;
 Accesspoints accesspoints;
 Stations     stations;
 Scan   scan;
@@ -46,6 +44,8 @@ Attack attack;
 CLI    cli;
 DisplayUI displayUI;
 
+simplebutton::Button* resetButton;
+
 #include "wifi.h"
 
 uint32_t autosaveTime = 0;
@@ -63,9 +63,9 @@ void setup() {
 
     // start SPIFFS
     prnt(SETUP_MOUNT_SPIFFS);
-    //bool spiffsError = !LittleFS.begin();
+    // bool spiffsError = !LittleFS.begin();
     LittleFS.begin();
-    prntln(/*spiffsError ? SETUP_ERROR : */SETUP_OK);
+    prntln(/*spiffsError ? SETUP_ERROR : */ SETUP_OK);
 
     // Start EEPROM
     EEPROMHelper::begin(EEPROM_SIZE);
@@ -83,7 +83,7 @@ void setup() {
 #endif // ifdef FORMAT_EEPROM
 
     // Format SPIFFS when in boot-loop
-    if (/*spiffsError || */!EEPROMHelper::checkBootNum(BOOT_COUNTER_ADDR)) {
+    if (/*spiffsError || */ !EEPROMHelper::checkBootNum(BOOT_COUNTER_ADDR)) {
         prnt(SETUP_FORMAT_SPIFFS);
         LittleFS.format();
         prntln(SETUP_OK);
@@ -114,12 +114,9 @@ void setup() {
     // start display
     if (settings::getDisplaySettings().enabled) {
         displayUI.setup();
-        displayUI.mode = displayUI.DISPLAY_MODE::INTRO;
+        displayUI.mode = DISPLAY_MODE::INTRO;
     }
 
-    // copy web files to SPIFFS
-    //copyWebFiles(false);
-
     // load everything else
     names.load();
     ssids.load();
@@ -128,9 +125,6 @@ void setup() {
     // create scan.json
     scan.setup();
 
-    // set channel
-    setWifiChannel(settings::getWifiSettings().channel);
-
     // dis/enable serial command interface
     if (settings::getCLISettings().enabled) {
         cli.enable();
@@ -151,13 +145,16 @@ void setup() {
 
     // setup LED
     led::setup();
+
+    // setup reset button
+    resetButton = new ButtonPullup(RESET_BUTTON);
 }
 
 void loop() {
     currentTime = millis();
 
-    led::update();    // update LED color
-    wifi::update();    // manage access point
+    led::update();   // update LED color
+    wifi::update();  // manage access point
     attack.update(); // run attacks
     displayUI.update();
     cli.update();    // read and run serial input
@@ -180,4 +177,20 @@ void loop() {
         displayUI.setupLED();
 #endif // ifdef HIGHLIGHT_LED
     }
-}
+
+    resetButton->update();
+    if (resetButton->holding(5000)) {
+        led::setMode(LED_MODE::SCAN);
+        DISPLAY_MODE _mode = displayUI.mode;
+        displayUI.mode = DISPLAY_MODE::RESETTING;
+        displayUI.update(true);
+
+        settings::reset();
+        settings::save(true);
+
+        delay(2000);
+
+        led::setMode(LED_MODE::IDLE);
+        displayUI.mode = _mode;
+    }
+}

esp8266_deauther/functions.h

@@ -1,12 +1,13 @@
-#ifndef functions_h
-#define functions_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 #include <LittleFS.h>
 extern "C" {
   #include "user_interface.h"
 }
-#include "ArduinoJson.h"
+#include "src/ArduinoJson-v5.13.5/ArduinoJson.h"
 
 /*
    Here is a collection of useful functions and variables.
@@ -196,6 +197,7 @@ bool eqls(const char* str, const char* keywordPtr) {
     if (strlen(str) > 255) return false;  // when string too long
 
     char keyword[strlen_P(keywordPtr) + 1];
+
     strcpy_P(keyword, keywordPtr);
 
     uint8_t lenStr     = strlen(str);
@@ -309,8 +311,8 @@ void prntln(const uint32_t i) {
 }
 
 /* ===== WiFi ===== */
-void setWifiChannel(uint8_t ch) {
-    if ((ch != wifi_channel) && (ch > 0) && (ch < 15)) {
+void setWifiChannel(uint8_t ch, bool force) {
+    if (((ch != wifi_channel) || force) && (ch < 15)) {
         wifi_channel = ch;
         wifi_set_channel(wifi_channel);
     }
@@ -324,6 +326,7 @@ void setOutputPower(float dBm) {
     }
 
     uint8_t val = (dBm * 4.0f);
+
     system_phy_set_max_tpw(val);
 }
 
@@ -825,6 +828,4 @@ String formatBytes(size_t bytes) {
     else if (bytes < (1024 * 1024)) return String(bytes / 1024.0) + "KB";
     else if (bytes < (1024 * 1024 * 1024)) return String(bytes / 1024.0 / 1024.0) + "MB";
     else return String(bytes / 1024.0 / 1024.0 / 1024.0) + "GB";
-}
-
-#endif // ifndef functions_h
+}

esp8266_deauther/language.h

@@ -1,5 +1,6 @@
-#ifndef language_h
-#define language_h
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
+#pragma once
 
 #include "Arduino.h"
 
@@ -200,9 +201,8 @@ const char CLI_HELP_COMMENT[] PROGMEM = "// <comments>";
 const char CLI_HELP_SEND_DEAUTH[] PROGMEM = "send deauth <apMac> <stMac> <rason> <channel>";
 const char CLI_HELP_SEND_BEACON[] PROGMEM = "send beacon <mac> <ssid> <ch> [wpa2]";
 const char CLI_HELP_SEND_PROBE[] PROGMEM = "send probe <mac> <ssid> <ch>";
-const char CLI_HELP_LED_A[] PROGMEM = "led <r> <g> <b> [<brightness>]";
-const char CLI_HELP_LED_B[] PROGMEM = "led <#rrggbb> [<brightness>]";
-const char CLI_HELP_LED_ENABLE[] PROGMEM = "led <enable/disable>";
+const char CLI_HELP_LED_A[] PROGMEM = "led <r> <g> <b>";
+const char CLI_HELP_LED_B[] PROGMEM = "led <#rrggbb>";
 const char CLI_HELP_DRAW[] PROGMEM = "draw";
 const char CLI_HELP_SCREEN_ON[] PROGMEM = "screen <on/off>";
 const char CLI_HELP_SCREEN_MODE[] PROGMEM = "screen mode <menu/packetmonitor/buttontest/loading>";
@@ -365,6 +365,8 @@ const char D_SHOW[] PROGMEM = "SELECT";
 const char D_ATTACK[] PROGMEM = "ATTACK";
 const char D_PACKET_MONITOR[] PROGMEM = "PACKET MONITOR";
 const char D_CLOCK[] PROGMEM = "CLOCK";
+const char D_CLOCK_DISPLAY[] PROGMEM = "CLOCK DISPLAY";
+const char D_CLOCK_SET[] PROGMEM = "SET CLOCK";
 
 // SCAN MENU
 const char D_SCAN_APST[] PROGMEM = "SCAN AP + ST";
@@ -541,7 +543,7 @@ const char W_BAD_ARGS[] PROGMEM = "BAD ARGS";
 const char W_BAD_PATH[] PROGMEM = "BAD PATH";
 const char W_FILE_NOT_FOUND[] PROGMEM = "ERROR 404 File Not Found";
 const char W_STARTED_AP[] PROGMEM = "Started AP";
-const char W_WEBINTERFACE[] PROGMEM = "/web";  // default folder containing the web files
+const char W_WEBINTERFACE[] PROGMEM = "/web"; // default folder containing the web files
 const char W_DEFAULT_LANG[] PROGMEM = "/lang/default.lang";
 
 const char W_HTML[] PROGMEM = "text/html";
@@ -619,5 +621,4 @@ const char S_JSON_LEDENABLED[] PROGMEM = "led";
 
 // Display
 const char S_JSON_DISPLAYINTERFACE[] PROGMEM = "display";
-const char S_JSON_DISPLAY_TIMEOUT[] PROGMEM = "displayTimeout";
-#endif // ifndef language_h
+const char S_JSON_DISPLAY_TIMEOUT[] PROGMEM = "displayTimeout";

esp8266_deauther/led.cpp

@@ -1,43 +1,43 @@
-/*
-   Copyright (c) 2020 Stefan Kremser (@Spacehuhn)
-   This software is licensed under the MIT License. See the license file for details.
-   Source: github.com/spacehuhn/esp8266_deauther
- */
- 
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "led.h"
 
 #include "A_config.h" // Config for LEDs
-#include <Arduino.h> // digitalWrite, analogWrite, pinMode
+#include <Arduino.h>  // digitalWrite, analogWrite, pinMode
 #include "language.h" // Strings used in printColor and tempDisable
 #include "settings.h" // used in update()
-#include "Attack.h" // used in update()
-#include "Scan.h" // used in update()
+#include "Attack.h"   // used in update()
+#include "Scan.h"     // used in update()
 
 // Inlcude libraries for Neopixel or LED_MY92xx if used
 #if defined(LED_NEOPIXEL)
-#include <Adafruit_NeoPixel.h>
+#include "src/Adafruit_NeoPixel-1.7.0/Adafruit_NeoPixel.h"
 #elif defined(LED_MY92)
-#include <my92xx.h>
+#include "src/my92xx-3.0.3/my92xx.h"
+#elif defined(LED_DOTSTAR)
+#include "src/Adafruit_DotStar-1.1.4/Adafruit_DotStar.h"
 #endif // if defined(LED_NEOPIXEL)
 
-extern Attack   attack;
-extern Scan     scan;
+extern Attack attack;
+extern Scan   scan;
 
 namespace led {
     // ===== PRIVATE ===== //
     LED_MODE mode = OFF;
 
-    #if defined(LED_NEOPIXEL_RGB)
-        Adafruit_NeoPixel strip {LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_RGB + NEO_KHZ400};
-    #elif defined(LED_NEOPIXEL_GRB)
-        Adafruit_NeoPixel strip {LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ400};
-    #elif defined(LED_MY92)
-        my92xx myled {LED_MY92_MODEL, LED_MY92_NUM, LED_MY92_DATA, LED_MY92_CLK, MY92XX_COMMAND_DEFAULT};
-    #endif
+#if defined(LED_NEOPIXEL_RGB)
+    Adafruit_NeoPixel strip { LED_NUM, LED_NEOPIXEL_PIN, NEO_RGB + NEO_KHZ800 };
+#elif defined(LED_NEOPIXEL_GRB)
+    Adafruit_NeoPixel strip { LED_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800 };
+#elif defined(LED_MY92)
+    my92xx myled { LED_MY92_MODEL, LED_NUM, LED_MY92_DATA, LED_MY92_CLK, MY92XX_COMMAND_DEFAULT };
+#elif defined(LED_DOTSTAR)
+    Adafruit_DotStar strip { LED_NUM, LED_DOTSTAR_DATA, LED_DOTSTAR_CLK, DOTSTAR_BGR };
+#endif // if defined(LED_NEOPIXEL_RGB)
 
 
     void setColor(uint8_t r, uint8_t g, uint8_t b) {
-    #if defined(LED_DIGITAL)
+#if defined(LED_DIGITAL)
         if (LED_ANODE) {
             if (LED_PIN_R < 255) digitalWrite(LED_PIN_R, r > 0);
             if (LED_PIN_G < 255) digitalWrite(LED_PIN_G, g > 0);
@@ -47,7 +47,7 @@ namespace led {
             if (LED_PIN_G < 255) digitalWrite(LED_PIN_G, g == 0);
             if (LED_PIN_B < 255) digitalWrite(LED_PIN_B, b == 0);
         }
-    #elif defined(LED_RGB)
+#elif defined(LED_RGB)
         if (r > 0) r = r * LED_MODE_BRIGHTNESS / 100;
         if (g > 0) g = g * LED_MODE_BRIGHTNESS / 100;
         if (b > 0) b = b * LED_MODE_BRIGHTNESS / 100;
@@ -61,43 +61,43 @@ namespace led {
         analogWrite(LED_PIN_R, r);
         analogWrite(LED_PIN_G, g);
         analogWrite(LED_PIN_B, b);
-    #elif defined(LED_NEOPIXEL)
+#elif defined(LED_NEOPIXEL) || defined(LED_DOTSTAR)
 
-        for (size_t i = 0; i < LED_NEOPIXEL_NUM; i++) {
+        for (size_t i = 0; i < strip.numPixels(); i++) {
             strip.setPixelColor(i, r, g, b);
         }
 
         strip.show();
-    #elif defined(LED_MY9291)
+#elif defined(LED_MY9291)
         myled.setChannel(LED_MY92_CH_R, r);
         myled.setChannel(LED_MY92_CH_G, g);
         myled.setChannel(LED_MY92_CH_B, b);
         myled.setChannel(LED_MY92_CH_BRIGHTNESS, LED_MODE_BRIGHTNESS);
         myled.setState(true);
         myled.update();
-    #endif // if defined(LED_DIGITAL)
+#endif // if defined(LED_DIGITAL)
     }
 
     // ===== PUBLIC ===== //
     void setup() {
         analogWriteRange(0xff);
 
-        #if defined(LED_DIGITAL) || defined(LED_RGB)
-            if (LED_PIN_R < 255) pinMode(LED_PIN_R, OUTPUT);
-            if (LED_PIN_G < 255) pinMode(LED_PIN_G, OUTPUT);
-            if (LED_PIN_B < 255) pinMode(LED_PIN_B, OUTPUT);
-        #elif defined(LED_NEOPIXEL)
-            strip.begin();
-            strip.setBrightness(LED_MODE_BRIGHTNESS);
-            strip.show();
-        #elif defined(LED_MY9291)
-            myled.setChannel(LED_MY92_CH_R, 0);
-            myled.setChannel(LED_MY92_CH_G, 0);
-            myled.setChannel(LED_MY92_CH_B, 0);
-            myled.setChannel(LED_MY92_CH_BRIGHTNESS, LED_MODE_BRIGHTNESS);
-            myled.setState(true);
-            myled.update();
-        #endif // if defined(LED_DIGITAL) || defined(LED_RGB)
+#if defined(LED_DIGITAL) || defined(LED_RGB)
+        if (LED_PIN_R < 255) pinMode(LED_PIN_R, OUTPUT);
+        if (LED_PIN_G < 255) pinMode(LED_PIN_G, OUTPUT);
+        if (LED_PIN_B < 255) pinMode(LED_PIN_B, OUTPUT);
+#elif defined(LED_NEOPIXEL) || defined(LED_DOTSTAR)
+        strip.begin();
+        strip.setBrightness(LED_MODE_BRIGHTNESS);
+        strip.show();
+#elif defined(LED_MY9291)
+        myled.setChannel(LED_MY92_CH_R, 0);
+        myled.setChannel(LED_MY92_CH_G, 0);
+        myled.setChannel(LED_MY92_CH_B, 0);
+        myled.setChannel(LED_MY92_CH_BRIGHTNESS, LED_MODE_BRIGHTNESS);
+        myled.setState(true);
+        myled.update();
+#endif // if defined(LED_DIGITAL) || defined(LED_RGB)
     }
 
     void update() {
@@ -132,4 +132,4 @@ namespace led {
             }
         }
     }
-}
+}

esp8266_deauther/led.h

@@ -1,11 +1,9 @@
-/*
-   Copyright (c) 2020 Stefan Kremser (@Spacehuhn)
-   This software is licensed under the MIT License. See the license file for details.
-   Source: github.com/spacehuhn/esp8266_deauther
- */
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
 
 #pragma once
 
+#include <cstdint>
+
 enum LED_MODE {
     OFF,
     SCAN,
@@ -14,7 +12,8 @@ enum LED_MODE {
 };
 
 namespace led {
-        void setup();
-        void update();
-        void setMode(LED_MODE new_mode, bool force = false);
+    void setup();
+    void update();
+    void setMode(LED_MODE new_mode, bool force = false);
+    void setColor(uint8_t r, uint8_t g, uint8_t b);
 }

esp8266_deauther/settings.cpp

@@ -1,13 +1,9 @@
-/*
-   Copyright (c) 2020 Stefan Kremser (@Spacehuhn)
-   This software is licensed under the MIT License. See the license file for details.
-   Source: github.com/spacehuhn/esp8266_deauther
- */
- 
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #include "settings.h"
 
-#include "A_config.h" // Default Settings
-#include "language.h" // prnt and prntln
+#include "A_config.h"     // Default Settings
+#include "language.h"     // prnt and prntln
 #include "EEPROMHelper.h" // To load and save settings_t
 #include "debug.h"
 
@@ -17,29 +13,29 @@ extern bool writeFile(String path, String& buf);
 extern void getRandomMac(uint8_t* mac);
 extern bool macValid(uint8_t* mac);
 
-#define JSON_FLAG(_NAME,_VALUE)\
-    str += String('"') + String(FPSTR(_NAME)) + String(F("\":")) + String(_VALUE?"true":"false") + String(',');
+#define JSON_FLAG(_NAME, _VALUE)\
+    str += String('"') + String(FPSTR(_NAME)) + String(F("\":")) + String(_VALUE ? "true" : "false") + String(',');
 
-#define JSON_VALUE(_NAME,_VALUE)\
+#define JSON_VALUE(_NAME, _VALUE)\
     str += String('"') + String(FPSTR(_NAME)) + String(F("\":\"")) + String(_VALUE) + String(F("\","));
 
-#define JSON_INT(_NAME,_VALUE)\
+#define JSON_INT(_NAME, _VALUE)\
     str += String('"') + String(FPSTR(_NAME)) + String(F("\":")) + String(_VALUE) + String(',');
 
-#define JSON_HEX(_NAME,_BYTES,_LEN)\
+#define JSON_HEX(_NAME, _BYTES, _LEN)\
     str += String('"') + String(FPSTR(_NAME)) + String(F("\":\""));\
     for (int i = 0; i<_LEN; i++) {\
-        if (i > 0) str += ':';\
+        if (i > 0) str            += ':';\
         if (_BYTES[i] < 0x10) str += '0';\
-        str += String(_BYTES[i], HEX);\
+        str                       += String(_BYTES[i], HEX);\
     }\
     str += String(F("\","));
 
-#define JSON_DEC(_NAME,_BYTES,_LEN)\
+#define JSON_DEC(_NAME, _BYTES, _LEN)\
     str += String(F("\"")) + String(FPSTR(_NAME)) + String(F("\":\""));\
     for (int i = 0; i<_LEN; i++) {\
         if (i > 0) str += '.';\
-        str += String(_BYTES[i]);\
+        str            += String(_BYTES[i]);\
     }\
     str += String(F("\","));
 
@@ -47,7 +43,7 @@ extern bool macValid(uint8_t* mac);
 namespace settings {
     // ========== PRIVATE ========== //
     const char* SETTINGS_PATH = "/settings.json";
-    
+
     settings_t data;
     bool changed = false;
 
@@ -56,7 +52,7 @@ namespace settings {
         str.reserve(600);
 
         str += '{';
-        
+
         // Version
         JSON_VALUE(S_JSON_VERSION, DEAUTHER_VERSION);
 
@@ -104,7 +100,7 @@ namespace settings {
         // Display
         JSON_FLAG(S_JSON_DISPLAYINTERFACE, data.display.enabled);
         JSON_INT(S_JSON_DISPLAY_TIMEOUT, data.display.timeout);
-        
+
         str.setCharAt(str.length()-1, '}');
     }
 
@@ -114,21 +110,23 @@ namespace settings {
 
         // read data from eeproms
         settings_t newData;
+
         EEPROMHelper::getObject(SETTINGS_ADDR, newData);
 
         // calc and check hash
         if (newData.magic_num == MAGIC_NUM) {
-            data = newData;
-            data.version.major = DEAUTHER_VERSION_MAJOR;
-            data.version.minor = DEAUTHER_VERSION_MINOR;
+            data                  = newData;
+            data.version.major    = DEAUTHER_VERSION_MAJOR;
+            data.version.minor    = DEAUTHER_VERSION_MINOR;
             data.version.revision = DEAUTHER_VERSION_REVISION;
             debuglnF("OK");
             save();
         } else {
             debuglnF("Invalid Hash");
+
             /*debug(data.magic_num);
-            debugF(" != ");
-            debugln(MAGIC_NUM);*/
+               debugF(" != ");
+               debugln(MAGIC_NUM);*/
 
             reset();
             save();
@@ -143,47 +141,48 @@ namespace settings {
 
     void reset() {
         data.magic_num = MAGIC_NUM;
-        
-        data.version.major = DEAUTHER_VERSION_MAJOR;
-        data.version.minor = DEAUTHER_VERSION_MINOR;
+
+        data.version.major    = DEAUTHER_VERSION_MAJOR;
+        data.version.minor    = DEAUTHER_VERSION_MINOR;
         data.version.revision = DEAUTHER_VERSION_REVISION;
-        
-        data.attack.attack_all_ch = ATTACK_ALL_CH;
-        data.attack.random_tx = RANDOM_TX;
-        data.attack.timeout = ATTACK_TIMEOUT;
-        data.attack.deauths_per_target = DEAUTHS_PER_TARGET;
-        data.attack.deauth_reason = DEAUTH_REASON;
-        data.attack.beacon_interval = beacon_interval_t::INTERVAL_100MS;
+
+        data.attack.attack_all_ch         = ATTACK_ALL_CH;
+        data.attack.random_tx             = RANDOM_TX;
+        data.attack.timeout               = ATTACK_TIMEOUT;
+        data.attack.deauths_per_target    = DEAUTHS_PER_TARGET;
+        data.attack.deauth_reason         = DEAUTH_REASON;
+        data.attack.beacon_interval       = beacon_interval_t::INTERVAL_100MS;
         data.attack.probe_frames_per_ssid = PROBE_FRAMES_PER_SSID;
-        
+
         data.wifi.channel = 1;
         getRandomMac(data.wifi.mac_st);
         getRandomMac(data.wifi.mac_ap);
 
-        data.sniffer.channel_time = CH_TIME;
+        data.sniffer.channel_time      = CH_TIME;
         data.sniffer.min_deauth_frames = MIN_DEAUTH_FRAMES;
 
         strncpy(data.ap.ssid, AP_SSID, 32);
         strncpy(data.ap.password, AP_PASSWD, 64);
         data.ap.hidden = AP_HIDDEN;
         uint8_t ip[4] = AP_IP_ADDR;
+
         memcpy(data.ap.ip, ip, 4);
 
-        data.web.enabled = WEB_ENABLED;
+        data.web.enabled        = WEB_ENABLED;
         data.web.captive_portal = WEB_CAPTIVE_PORTAL;
-        data.web.use_spiffs = WEB_USE_SPIFFS;
+        data.web.use_spiffs     = WEB_USE_SPIFFS;
         memcpy(data.web.lang, DEFAULT_LANG, 3);
 
-        data.cli.enabled = CLI_ENABLED;
+        data.cli.enabled     = CLI_ENABLED;
         data.cli.serial_echo = CLI_ECHO;
 
         data.led.enabled = USE_LED;
 
         data.display.enabled = USE_DISPLAY;
         data.display.timeout = DISPLAY_TIMEOUT;
-        
+
         changed = true;
-        
+
         debuglnF("Settings reset to default");
     }
 
@@ -192,7 +191,7 @@ namespace settings {
             EEPROMHelper::saveObject(SETTINGS_ADDR, data);
 
             changed = false;
-            
+
             String json_buffer;
             get_json(json_buffer);
 
@@ -205,9 +204,10 @@ namespace settings {
             debugln(SETTINGS_PATH);
         }
     }
-    
+
     void print() {
         String json_buffer;
+
         get_json(json_buffer);
 
         json_buffer.replace("\":", ": ");
@@ -267,7 +267,7 @@ namespace settings {
     const display_settings_t& getDisplaySettings() {
         return data.display;
     }
-    
+
     // ===== SETTERS ===== //
 
     void setAllSettings(settings_t& newSettings) {

esp8266_deauther/settings.h

@@ -1,12 +1,8 @@
-/*
-   Copyright (c) 2020 Stefan Kremser (@Spacehuhn)
-   This software is licensed under the MIT License. See the license file for details.
-   Source: github.com/spacehuhn/esp8266_deauther
- */
- 
+/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */
+
 #pragma once
 
-#include <Arduino.h>  // Arduino String, Serial
+#include <Arduino.h> // Arduino String, Serial
 #include "A_config.h"
 
 // ===== VERSION ===== //
@@ -24,7 +20,7 @@ typedef struct autosave_settings_t {
 
 // ===== ATTACK ===== //
 typedef enum beacon_interval_t {
-    INTERVAL_1S = 0,
+    INTERVAL_1S    = 0,
     INTERVAL_100MS = 1
 } beacon_interval_t;
 
@@ -114,11 +110,11 @@ namespace settings {
     void print();
 
     const settings_t& getAllSettings();
-    const version_t & getVersion();
+    const version_t& getVersion();
     const autosave_settings_t& getAutosaveSettings();
-    const attack_settings_t  & getAttackSettings();
-    const wifi_settings_t    & getWifiSettings();
-    const sniffer_settings_t & getSnifferSettings();
+    const attack_settings_t& getAttackSettings();
+    const wifi_settings_t& getWifiSettings();
+    const sniffer_settings_t& getSnifferSettings();
     const access_point_settings_t& getAccessPointSettings();
     const web_settings_t& getWebSettings();
     const cli_settings_t& getCLISettings();

esp8266_deauther/src/Adafruit_DotStar-1.1.4/Adafruit_DotStar.cpp

@@ -0,0 +1,638 @@
+/*!
+ * @file Adafruit_DotStar.cpp
+ *
+ * @mainpage Arduino Library for driving Adafruit DotStar addressable LEDs
+ * and compatible devicess -- APA102, etc.
+ *
+ * @section intro_sec Introduction
+ *
+ * This is the documentation for Adafruit's DotStar library for the
+ * Arduino platform, allowing a broad range of microcontroller boards
+ * (most AVR boards, many ARM devices, ESP8266 and ESP32, among others)
+ * to control Adafruit DotStars and compatible devices -- APA102, etc.
+ *
+ * Adafruit invests time and resources providing this open source code,
+ * please support Adafruit and open-source hardware by purchasing products
+ * from Adafruit!
+ *
+ * @section author Author
+ *
+ * Written by Limor Fried and Phil Burgess for Adafruit Industries with
+ * contributions from members of the open source community.
+ *
+ * @section license License
+ *
+ * This file is part of the Adafruit_DotStar library.
+ *
+ * Adafruit_DotStar is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * Adafruit_DotStar is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with DotStar. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "Adafruit_DotStar.h"
+#if !defined(__AVR_ATtiny85__)
+#include <SPI.h>
+#endif
+
+#define USE_HW_SPI 255 ///< Assigned to dataPin to indicate 'hard' SPI
+
+/*!
+  @brief   DotStar constructor for hardware SPI. Must be connected to
+           MOSI, SCK pins.
+  @param   n  Number of DotStars in strand.
+  @param   o  Pixel type -- one of the DOTSTAR_* constants defined in
+              Adafruit_DotStar.h, for example DOTSTAR_BRG for DotStars
+              expecting color bytes expressed in blue, red, green order
+              per pixel. Default if unspecified is DOTSTAR_BRG.
+  @return  Adafruit_DotStar object. Call the begin() function before use.
+*/
+Adafruit_DotStar::Adafruit_DotStar(uint16_t n, uint8_t o)
+    : numLEDs(n), dataPin(USE_HW_SPI), brightness(0), pixels(NULL),
+      rOffset(o & 3), gOffset((o >> 2) & 3), bOffset((o >> 4) & 3) {
+  updateLength(n);
+}
+
+/*!
+  @brief   DotStar constructor for 'soft' (bitbang) SPI. Any two pins
+           can be used.
+  @param   n      Number of DotStars in strand.
+  @param   data   Arduino pin number for data out.
+  @param   clock  Arduino pin number for clock out.
+  @param   o      Pixel type -- one of the DOTSTAR_* constants defined in
+                  Adafruit_DotStar.h, for example DOTSTAR_BRG for DotStars
+                  expecting color bytes expressed in blue, red, green order
+                  per pixel. Default if unspecified is DOTSTAR_BRG.
+  @return  Adafruit_DotStar object. Call the begin() function before use.
+*/
+Adafruit_DotStar::Adafruit_DotStar(uint16_t n, uint8_t data, uint8_t clock,
+                                   uint8_t o)
+    : dataPin(data), clockPin(clock), brightness(0), pixels(NULL),
+      rOffset(o & 3), gOffset((o >> 2) & 3), bOffset((o >> 4) & 3) {
+  updateLength(n);
+}
+
+/*!
+  @brief   Deallocate Adafruit_DotStar object, set data and clock pins
+           back to INPUT.
+*/
+Adafruit_DotStar::~Adafruit_DotStar(void) {
+  free(pixels);
+  if (dataPin == USE_HW_SPI)
+    hw_spi_end();
+  else
+    sw_spi_end();
+}
+
+/*!
+  @brief   Initialize Adafruit_DotStar object -- sets data and clock pins
+           to outputs and initializes hardware SPI if necessary.
+*/
+void Adafruit_DotStar::begin(void) {
+  if (dataPin == USE_HW_SPI)
+    hw_spi_init();
+  else
+    sw_spi_init();
+}
+
+// Pins may be reassigned post-begin(), so a sketch can store hardware
+// config in flash, SD card, etc. rather than hardcoded. Also permits
+// "recycling" LED ram across multiple strips: set pins to first strip,
+// render & write all data, reassign pins to next strip, render & write,
+// etc. They won't update simultaneously, but usually unnoticeable.
+
+/*!
+  @brief   Switch over to hardware SPI. DotStars must be connected to
+           MOSI, SCK pins. Data in pixel buffer is unaffected and can
+           continue to be used.
+*/
+void Adafruit_DotStar::updatePins(void) {
+  sw_spi_end();
+  dataPin = USE_HW_SPI;
+  hw_spi_init();
+}
+
+/*!
+  @brief   Switch over to 'soft' (bitbang) SPI. DotStars can be connected
+           to any two pins. Data in pixel buffer is unaffected and can
+           continue to be used.
+  @param   data   Arduino pin number for data out.
+  @param   clock  Arduino pin number for clock out.
+*/
+void Adafruit_DotStar::updatePins(uint8_t data, uint8_t clock) {
+  hw_spi_end();
+  dataPin = data;
+  clockPin = clock;
+  sw_spi_init();
+}
+
+/*!
+  @brief   Change the length of a previously-declared Adafruit_DotStar
+           strip object. Old data is deallocated and new data is cleared.
+           Pin numbers and pixel format are unchanged.
+  @param   n  New length of strip, in pixels.
+  @note    This function is deprecated, here only for old projects that
+           may still be calling it. New projects should instead use the
+           'new' keyword.
+*/
+void Adafruit_DotStar::updateLength(uint16_t n) {
+  free(pixels);
+  uint16_t bytes = (rOffset == gOffset)
+                       ? n + ((n + 3) / 4)
+                       :      // MONO: 10 bits/pixel, round up to next byte
+                       n * 3; // COLOR: 3 bytes/pixel
+  if ((pixels = (uint8_t *)malloc(bytes))) {
+    numLEDs = n;
+    clear();
+  } else {
+    numLEDs = 0;
+  }
+}
+
+// SPI STUFF ---------------------------------------------------------------
+
+/*!
+  @brief   Initialize hardware SPI.
+  @note    This library is written in pre-SPI-transactions style and needs
+           some rewriting to correctly share the SPI bus with other devices.
+*/
+void Adafruit_DotStar::hw_spi_init(void) { // Initialize hardware SPI
+#ifdef __AVR_ATtiny85__
+  PORTB &= ~(_BV(PORTB1) | _BV(PORTB2)); // Outputs
+  DDRB |= _BV(PORTB1) | _BV(PORTB2);     // DO (NOT MOSI) + SCK
+#elif (SPI_INTERFACES_COUNT > 0) || !defined(SPI_INTERFACES_COUNT)
+  SPI.begin();
+  // Hardware SPI clock speeds are chosen to run at roughly 1-8 MHz for most
+  // boards, providing a slower but more reliable experience by default.  If
+  // you want faster LED updates, experiment with the clock speeds to find
+  // what works best with your particular setup.
+#if defined(__AVR__) || defined(CORE_TEENSY) || defined(__ARDUINO_ARC__) ||    \
+    defined(__ARDUINO_X86__)
+  SPI.setClockDivider(SPI_CLOCK_DIV2); // 8 MHz (6 MHz on Pro Trinket 3V)
+#else
+#ifdef ESP8266
+  SPI.setFrequency(8000000L);
+#elif defined(PIC32)
+  // Use begin/end transaction to set SPI clock rate
+  SPI.beginTransaction(SPISettings(8000000, MSBFIRST, SPI_MODE0));
+  SPI.endTransaction();
+#else
+  SPI.setClockDivider((F_CPU + 4000000L) / 8000000L); // 8-ish MHz on Due
+#endif
+#endif
+  SPI.setBitOrder(MSBFIRST);
+  SPI.setDataMode(SPI_MODE0);
+#endif
+}
+
+/*!
+  @brief   Stop hardware SPI.
+*/
+void Adafruit_DotStar::hw_spi_end(void) {
+#ifdef __AVR_ATtiny85__
+  DDRB &= ~(_BV(PORTB1) | _BV(PORTB2)); // Inputs
+#elif (SPI_INTERFACES_COUNT > 0) || !defined(SPI_INTERFACES_COUNT)
+  SPI.end();
+#endif
+}
+
+/*!
+  @brief   Initialize 'soft' (bitbang) SPI. Data and clock pins are set
+           to outputs.
+*/
+void Adafruit_DotStar::sw_spi_init(void) {
+  pinMode(dataPin, OUTPUT);
+  pinMode(clockPin, OUTPUT);
+#ifdef __AVR__
+  dataPort = portOutputRegister(digitalPinToPort(dataPin));
+  clockPort = portOutputRegister(digitalPinToPort(clockPin));
+  dataPinMask = digitalPinToBitMask(dataPin);
+  clockPinMask = digitalPinToBitMask(clockPin);
+  *dataPort &= ~dataPinMask;
+  *clockPort &= ~clockPinMask;
+#else
+  digitalWrite(dataPin, LOW);
+  digitalWrite(clockPin, LOW);
+#endif
+}
+
+/*!
+  @brief   Stop 'soft' (bitbang) SPI. Data and clock pins are set to inputs.
+*/
+void Adafruit_DotStar::sw_spi_end() {
+  pinMode(dataPin, INPUT);
+  pinMode(clockPin, INPUT);
+}
+
+#ifdef __AVR_ATtiny85__
+
+// Teensy/Gemma-specific stuff for hardware-half-assisted SPI
+
+#define SPIBIT                                                                 \
+  USICR = ((1 << USIWM0) | (1 << USITC));                                      \
+  USICR =                                                                      \
+      ((1 << USIWM0) | (1 << USITC) | (1 << USICLK)); // Clock bit tick, tock
+
+static void spi_out(uint8_t n) { // Clock out one byte
+  USIDR = n;
+  SPIBIT SPIBIT SPIBIT SPIBIT SPIBIT SPIBIT SPIBIT SPIBIT
+}
+
+#elif (SPI_INTERFACES_COUNT > 0) || !defined(SPI_INTERFACES_COUNT)
+
+// All other boards have full-featured hardware support for SPI
+
+#define spi_out(n) (void)SPI.transfer(n) ///< Call hardware SPI function
+// Pipelining reads next byte while current byte is clocked out
+#if (defined(__AVR__) && !defined(__AVR_ATtiny85__)) || defined(CORE_TEENSY)
+#define SPI_PIPELINE
+#endif
+
+#else // no hardware spi
+#define spi_out(n) sw_spi_out(n)
+
+#endif
+
+/*!
+  @brief   Soft (bitbang) SPI write.
+  @param   n  8-bit value to transfer.
+*/
+void Adafruit_DotStar::sw_spi_out(uint8_t n) {
+  for (uint8_t i = 8; i--; n <<= 1) {
+#ifdef __AVR__
+    if (n & 0x80)
+      *dataPort |= dataPinMask;
+    else
+      *dataPort &= ~dataPinMask;
+    *clockPort |= clockPinMask;
+    *clockPort &= ~clockPinMask;
+#else
+    if (n & 0x80)
+      digitalWrite(dataPin, HIGH);
+    else
+      digitalWrite(dataPin, LOW);
+    digitalWrite(clockPin, HIGH);
+#if F_CPU >= 48000000
+    __asm__ volatile("nop \n nop");
+#endif
+    digitalWrite(clockPin, LOW);
+#if F_CPU >= 48000000
+    __asm__ volatile("nop \n nop");
+#endif
+#endif
+  }
+}
+
+/* ISSUE DATA TO LED STRIP -------------------------------------------------
+
+  Although the LED driver has an additional per-pixel 5-bit brightness
+  setting, it is NOT used or supported here. On APA102, the normally
+  very fast PWM is gated through a much slower PWM (about 400 Hz),
+  rendering it useless for POV or other high-speed things that are
+  probably why one is using DotStars instead of NeoPixels in the first
+  place. I'm told that some APA102 clones use current control rather than
+  PWM for this, which would be much more worthwhile. Still, no support
+  here, no plans for it. If you really can't live without it, you can fork
+  the library and add it for your own use, but any pull requests for this
+  are unlikely be merged for the foreseeable future.
+*/
+
+/*!
+  @brief   Transmit pixel data in RAM to DotStars.
+*/
+void Adafruit_DotStar::show(void) {
+
+  if (!pixels)
+    return;
+
+  uint8_t *ptr = pixels, i;            // -> LED data
+  uint16_t n = numLEDs;                // Counter
+  uint16_t b16 = (uint16_t)brightness; // Type-convert for fixed-point math
+
+  if (dataPin == USE_HW_SPI) {
+
+    // TO DO: modernize this for SPI transactions
+
+#ifdef SPI_PIPELINE
+    uint8_t next;
+    for (i = 0; i < 3; i++)
+      spi_out(0x00); // First 3 start-frame bytes
+    SPDR = 0x00;     // 4th is pipelined
+    do {             // For each pixel...
+      while (!(SPSR & _BV(SPIF)))
+        ;                       //  Wait for prior byte out
+      SPDR = 0xFF;              //  Pixel start
+      for (i = 0; i < 3; i++) { //  For R,G,B...
+        next = brightness ? (*ptr++ * b16) >> 8 : *ptr++; // Read, scale
+        while (!(SPSR & _BV(SPIF)))
+          ;          //   Wait for prior byte out
+        SPDR = next; //   Write scaled color
+      }
+    } while (--n);
+    while (!(SPSR & _BV(SPIF)))
+      ; // Wait for last byte out
+#else
+    for (i = 0; i < 4; i++)
+      spi_out(0x00);   // 4 byte start-frame marker
+    if (brightness) {  // Scale pixel brightness on output
+      do {             // For each pixel...
+        spi_out(0xFF); //  Pixel start
+        for (i = 0; i < 3; i++)
+          spi_out((*ptr++ * b16) >> 8); // Scale, write RGB
+      } while (--n);
+    } else {           // Full brightness (no scaling)
+      do {             // For each pixel...
+        spi_out(0xFF); //  Pixel start
+        for (i = 0; i < 3; i++)
+          spi_out(*ptr++); // Write R,G,B
+      } while (--n);
+    }
+#endif
+    // Four end-frame bytes are seemingly indistinguishable from a white
+    // pixel, and empirical testing suggests it can be left out...but it's
+    // always a good idea to follow the datasheet, in case future hardware
+    // revisions are more strict (e.g. might mandate use of end-frame
+    // before start-frame marker). i.e. let's not remove this. But after
+    // testing a bit more the suggestion is to use at least (numLeds+1)/2
+    // high values (1) or (numLeds+15)/16 full bytes as EndFrame. For details
+    // see also:
+    // https://cpldcpu.wordpress.com/2014/11/30/understanding-the-apa102-superled/
+    for (i = 0; i < ((numLEDs + 15) / 16); i++)
+      spi_out(0xFF);
+
+  } else { // Soft (bitbang) SPI
+
+    for (i = 0; i < 4; i++)
+      sw_spi_out(0);      // Start-frame marker
+    if (brightness) {     // Scale pixel brightness on output
+      do {                // For each pixel...
+        sw_spi_out(0xFF); //  Pixel start
+        for (i = 0; i < 3; i++)
+          sw_spi_out((*ptr++ * b16) >> 8); // Scale, write
+      } while (--n);
+    } else {              // Full brightness (no scaling)
+      do {                // For each pixel...
+        sw_spi_out(0xFF); //  Pixel start
+        for (i = 0; i < 3; i++)
+          sw_spi_out(*ptr++); // R,G,B
+      } while (--n);
+    }
+    for (i = 0; i < ((numLEDs + 15) / 16); i++)
+      sw_spi_out(0xFF); // End-frame marker (see note above)
+  }
+}
+
+/*!
+  @brief   Fill the whole DotStar strip with 0 / black / off.
+*/
+void Adafruit_DotStar::clear() {
+  memset(pixels, 0,
+         (rOffset == gOffset) ? numLEDs + ((numLEDs + 3) / 4)
+                              : // MONO: 10 bits/pixel
+             numLEDs * 3);      // COLOR: 3 bytes/pixel
+}
+
+/*!
+  @brief   Set a pixel's color using separate red, green and blue components.
+  @param   n  Pixel index, starting from 0.
+  @param   r  Red brightness, 0 = minimum (off), 255 = maximum.
+  @param   g  Green brightness, 0 = minimum (off), 255 = maximum.
+  @param   b  Blue brightness, 0 = minimum (off), 255 = maximum.
+*/
+void Adafruit_DotStar::setPixelColor(uint16_t n, uint8_t r, uint8_t g,
+                                     uint8_t b) {
+  if (n < numLEDs) {
+    uint8_t *p = &pixels[n * 3];
+    p[rOffset] = r;
+    p[gOffset] = g;
+    p[bOffset] = b;
+  }
+}
+
+/*!
+  @brief   Set a pixel's color using a 32-bit 'packed' RGB value.
+  @param   n  Pixel index, starting from 0.
+  @param   c  32-bit color value. Most significant byte is 0, second is
+              red, then green, and least significant byte is blue.
+              e.g. 0x00RRGGBB
+*/
+void Adafruit_DotStar::setPixelColor(uint16_t n, uint32_t c) {
+  if (n < numLEDs) {
+    uint8_t *p = &pixels[n * 3];
+    p[rOffset] = (uint8_t)(c >> 16);
+    p[gOffset] = (uint8_t)(c >> 8);
+    p[bOffset] = (uint8_t)c;
+  }
+}
+
+/*!
+  @brief   Fill all or part of the DotStar strip with a color.
+  @param   c      32-bit color value. Most significant byte is 0, second
+                  is red, then green, and least significant byte is blue.
+                  e.g. 0x00RRGGBB. If all arguments are unspecified, this
+                  will be 0 (off).
+  @param   first  Index of first pixel to fill, starting from 0. Must be
+                  in-bounds, no clipping is performed. 0 if unspecified.
+  @param   count  Number of pixels to fill, as a positive value. Passing
+                  0 or leaving unspecified will fill to end of strip.
+*/
+void Adafruit_DotStar::fill(uint32_t c, uint16_t first, uint16_t count) {
+  uint16_t i, end;
+
+  if (first >= numLEDs) {
+    return; // If first LED is past end of strip, nothing to do
+  }
+
+  // Calculate the index ONE AFTER the last pixel to fill
+  if (count == 0) {
+    // Fill to end of strip
+    end = numLEDs;
+  } else {
+    // Ensure that the loop won't go past the last pixel
+    end = first + count;
+    if (end > numLEDs)
+      end = numLEDs;
+  }
+
+  for (i = first; i < end; i++) {
+    this->setPixelColor(i, c);
+  }
+}
+
+/*!
+  @brief   Convert hue, saturation and value into a packed 32-bit RGB color
+           that can be passed to setPixelColor() or other RGB-compatible
+           functions.
+  @param   hue  An unsigned 16-bit value, 0 to 65535, representing one full
+                loop of the color wheel, which allows 16-bit hues to "roll
+                over" while still doing the expected thing (and allowing
+                more precision than the wheel() function that was common to
+                prior DotStar and NeoPixel examples).
+  @param   sat  Saturation, 8-bit value, 0 (min or pure grayscale) to 255
+                (max or pure hue). Default of 255 if unspecified.
+  @param   val  Value (brightness), 8-bit value, 0 (min / black / off) to
+                255 (max or full brightness). Default of 255 if unspecified.
+  @return  Packed 32-bit RGB color. Result is linearly but not perceptually
+           correct, so you may want to pass the result through the gamma32()
+           function (or your own gamma-correction operation) else colors may
+           appear washed out. This is not done automatically by this
+           function because coders may desire a more refined gamma-
+           correction function than the simplified one-size-fits-all
+           operation of gamma32(). Diffusing the LEDs also really seems to
+           help when using low-saturation colors.
+*/
+uint32_t Adafruit_DotStar::ColorHSV(uint16_t hue, uint8_t sat, uint8_t val) {
+
+  uint8_t r, g, b;
+
+  // Remap 0-65535 to 0-1529. Pure red is CENTERED on the 64K rollover;
+  // 0 is not the start of pure red, but the midpoint...a few values above
+  // zero and a few below 65536 all yield pure red (similarly, 32768 is the
+  // midpoint, not start, of pure cyan). The 8-bit RGB hexcone (256 values
+  // each for red, green, blue) really only allows for 1530 distinct hues
+  // (not 1536, more on that below), but the full unsigned 16-bit type was
+  // chosen for hue so that one's code can easily handle a contiguous color
+  // wheel by allowing hue to roll over in either direction.
+  hue = (hue * 1530L + 32768) / 65536;
+  // Because red is centered on the rollover point (the +32768 above,
+  // essentially a fixed-point +0.5), the above actually yields 0 to 1530,
+  // where 0 and 1530 would yield the same thing. Rather than apply a
+  // costly modulo operator, 1530 is handled as a special case below.
+
+  // So you'd think that the color "hexcone" (the thing that ramps from
+  // pure red, to pure yellow, to pure green and so forth back to red,
+  // yielding six slices), and with each color component having 256
+  // possible values (0-255), might have 1536 possible items (6*256),
+  // but in reality there's 1530. This is because the last element in
+  // each 256-element slice is equal to the first element of the next
+  // slice, and keeping those in there this would create small
+  // discontinuities in the color wheel. So the last element of each
+  // slice is dropped...we regard only elements 0-254, with item 255
+  // being picked up as element 0 of the next slice. Like this:
+  // Red to not-quite-pure-yellow is:        255,   0, 0 to 255, 254,   0
+  // Pure yellow to not-quite-pure-green is: 255, 255, 0 to   1, 255,   0
+  // Pure green to not-quite-pure-cyan is:     0, 255, 0 to   0, 255, 254
+  // and so forth. Hence, 1530 distinct hues (0 to 1529), and hence why
+  // the constants below are not the multiples of 256 you might expect.
+
+  // Convert hue to R,G,B (nested ifs faster than divide+mod+switch):
+  if (hue < 510) { // Red to Green-1
+    b = 0;
+    if (hue < 255) { //   Red to Yellow-1
+      r = 255;
+      g = hue;       //     g = 0 to 254
+    } else {         //   Yellow to Green-1
+      r = 510 - hue; //     r = 255 to 1
+      g = 255;
+    }
+  } else if (hue < 1020) { // Green to Blue-1
+    r = 0;
+    if (hue < 765) { //   Green to Cyan-1
+      g = 255;
+      b = hue - 510;  //     b = 0 to 254
+    } else {          //   Cyan to Blue-1
+      g = 1020 - hue; //     g = 255 to 1
+      b = 255;
+    }
+  } else if (hue < 1530) { // Blue to Red-1
+    g = 0;
+    if (hue < 1275) { //   Blue to Magenta-1
+      r = hue - 1020; //     r = 0 to 254
+      b = 255;
+    } else { //   Magenta to Red-1
+      r = 255;
+      b = 1530 - hue; //     b = 255 to 1
+    }
+  } else { // Last 0.5 Red (quicker than % operator)
+    r = 255;
+    g = b = 0;
+  }
+
+  // Apply saturation and value to R,G,B, pack into 32-bit result:
+  uint32_t v1 = 1 + val;  // 1 to 256; allows >>8 instead of /255
+  uint16_t s1 = 1 + sat;  // 1 to 256; same reason
+  uint8_t s2 = 255 - sat; // 255 to 0
+  return ((((((r * s1) >> 8) + s2) * v1) & 0xff00) << 8) |
+         (((((g * s1) >> 8) + s2) * v1) & 0xff00) |
+         (((((b * s1) >> 8) + s2) * v1) >> 8);
+}
+
+/*!
+  @brief   Query the color of a previously-set pixel.
+  @param   n  Index of pixel to read (0 = first).
+  @return  'Packed' 32-bit RGB value. Most significant byte is 0, second is
+           is red, then green, and least significant byte is blue.
+*/
+uint32_t Adafruit_DotStar::getPixelColor(uint16_t n) const {
+  if (n >= numLEDs)
+    return 0;
+  uint8_t *p = &pixels[n * 3];
+  return ((uint32_t)p[rOffset] << 16) | ((uint32_t)p[gOffset] << 8) |
+         (uint32_t)p[bOffset];
+}
+
+/*!
+  @brief   Adjust output brightness. Does not immediately affect what's
+           currently displayed on the LEDs. The next call to show() will
+           refresh the LEDs at this level.
+  @param   b  Brightness setting, 0=minimum (off), 255=brightest.
+  @note    For various reasons I think brightness is better handled in
+           one's sketch, but it's here for parity with the NeoPixel
+           library. Good news is that brightness setting in this library
+           is 'non destructive' -- it's applied as color data is being
+           issued to the strip, not during setPixelColor(), and also
+           means that getPixelColor() returns the exact value originally
+           stored.
+*/
+void Adafruit_DotStar::setBrightness(uint8_t b) {
+  // Stored brightness value is different than what's passed. This
+  // optimizes the actual scaling math later, allowing a fast 8x8-bit
+  // multiply and taking the MSB. 'brightness' is a uint8_t, adding 1
+  // here may (intentionally) roll over...so 0 = max brightness (color
+  // values are interpreted literally; no scaling), 1 = min brightness
+  // (off), 255 = just below max brightness.
+  brightness = b + 1;
+}
+
+/*!
+  @brief   Retrieve the last-set brightness value for the strip.
+  @return  Brightness value: 0 = minimum (off), 255 = maximum.
+*/
+uint8_t Adafruit_DotStar::getBrightness(void) const {
+  return brightness - 1; // Reverse above operation
+}
+
+/*!
+  @brief   A gamma-correction function for 32-bit packed RGB colors.
+           Makes color transitions appear more perceptially correct.
+  @param   x  32-bit packed RGB color.
+  @return  Gamma-adjusted packed color, can then be passed in one of the
+           setPixelColor() functions. Like gamma8(), this uses a fixed
+           gamma correction exponent of 2.6, which seems reasonably okay
+           for average DotStars in average tasks. If you need finer
+           control you'll need to provide your own gamma-correction
+           function instead.
+*/
+uint32_t Adafruit_DotStar::gamma32(uint32_t x) {
+  uint8_t *y = (uint8_t *)&x;
+  // All four bytes of a 32-bit value are filtered to avoid a bunch of
+  // shifting and masking that would be necessary for properly handling
+  // different endianisms (and each byte is a fairly trivial operation,
+  // so it might not even be wasting cycles vs a check and branch.
+  // In theory this might cause trouble *if* someone's storing information
+  // in the unused most significant byte of an RGB value, but this seems
+  // exceedingly rare and if it's encountered in reality they can mask
+  // values going in or coming out.
+  for (uint8_t i = 0; i < 4; i++)
+    y[i] = gamma8(y[i]);
+  return x; // Packed 32-bit return
+}

esp8266_deauther/src/Adafruit_DotStar-1.1.4/Adafruit_DotStar.h

@@ -0,0 +1,211 @@
+/*!
+ * @file Adafruit_DotStar.h
+ *
+ * This file is part of the Adafruit_DotStar library.
+ *
+ * Adafruit_DotStar is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * Adafruit_DotStar is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with DotStar. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ADAFRUIT_DOT_STAR_H_
+#define _ADAFRUIT_DOT_STAR_H_
+
+#if (ARDUINO >= 100)
+#include <Arduino.h>
+#else
+#include <WProgram.h>
+#include <pins_arduino.h>
+#endif
+
+// Color-order flag for LED pixels (optional extra parameter to constructor):
+// Bits 0,1 = R index (0-2), bits 2,3 = G index, bits 4,5 = B index
+#define DOTSTAR_RGB (0 | (1 << 2) | (2 << 4)) ///< Transmit as R,G,B
+#define DOTSTAR_RBG (0 | (2 << 2) | (1 << 4)) ///< Transmit as R,B,G
+#define DOTSTAR_GRB (1 | (0 << 2) | (2 << 4)) ///< Transmit as G,R,B
+#define DOTSTAR_GBR (2 | (0 << 2) | (1 << 4)) ///< Transmit as G,B,R
+#define DOTSTAR_BRG (1 | (2 << 2) | (0 << 4)) ///< Transmit as B,R,G
+#define DOTSTAR_BGR (2 | (1 << 2) | (0 << 4)) ///< Transmit as B,G,R
+#define DOTSTAR_MONO 0 ///< Single-color strip WIP DO NOT USE, use RGB for now
+
+// These two tables are declared outside the Adafruit_DotStar class
+// because some boards may require oldschool compilers that don't
+// handle the C++11 constexpr keyword.
+
+/* A PROGMEM (flash mem) table containing 8-bit unsigned sine wave (0-255).
+   Copy & paste this snippet into a Python REPL to regenerate:
+import math
+for x in range(256):
+    print("{:3},".format(int((math.sin(x/128.0*math.pi)+1.0)*127.5+0.5))),
+    if x&15 == 15: print
+*/
+static const uint8_t PROGMEM _DotStarSineTable[256] = {
+    128, 131, 134, 137, 140, 143, 146, 149, 152, 155, 158, 162, 165, 167, 170,
+    173, 176, 179, 182, 185, 188, 190, 193, 196, 198, 201, 203, 206, 208, 211,
+    213, 215, 218, 220, 222, 224, 226, 228, 230, 232, 234, 235, 237, 238, 240,
+    241, 243, 244, 245, 246, 248, 249, 250, 250, 251, 252, 253, 253, 254, 254,
+    254, 255, 255, 255, 255, 255, 255, 255, 254, 254, 254, 253, 253, 252, 251,
+    250, 250, 249, 248, 246, 245, 244, 243, 241, 240, 238, 237, 235, 234, 232,
+    230, 228, 226, 224, 222, 220, 218, 215, 213, 211, 208, 206, 203, 201, 198,
+    196, 193, 190, 188, 185, 182, 179, 176, 173, 170, 167, 165, 162, 158, 155,
+    152, 149, 146, 143, 140, 137, 134, 131, 128, 124, 121, 118, 115, 112, 109,
+    106, 103, 100, 97,  93,  90,  88,  85,  82,  79,  76,  73,  70,  67,  65,
+    62,  59,  57,  54,  52,  49,  47,  44,  42,  40,  37,  35,  33,  31,  29,
+    27,  25,  23,  21,  20,  18,  17,  15,  14,  12,  11,  10,  9,   7,   6,
+    5,   5,   4,   3,   2,   2,   1,   1,   1,   0,   0,   0,   0,   0,   0,
+    0,   1,   1,   1,   2,   2,   3,   4,   5,   5,   6,   7,   9,   10,  11,
+    12,  14,  15,  17,  18,  20,  21,  23,  25,  27,  29,  31,  33,  35,  37,
+    40,  42,  44,  47,  49,  52,  54,  57,  59,  62,  65,  67,  70,  73,  76,
+    79,  82,  85,  88,  90,  93,  97,  100, 103, 106, 109, 112, 115, 118, 121,
+    124};
+
+/* Similar to above, but for an 8-bit gamma-correction table.
+   Copy & paste this snippet into a Python REPL to regenerate:
+import math
+gamma=2.6
+for x in range(256):
+    print("{:3},".format(int(math.pow((x)/255.0,gamma)*255.0+0.5))),
+    if x&15 == 15: print
+*/
+static const uint8_t PROGMEM _DotStarGammaTable[256] = {
+    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
+    0,   0,   0,   0,   0,   0,   0,   0,   0,   1,   1,   1,   1,   1,   1,
+    1,   1,   1,   1,   1,   1,   2,   2,   2,   2,   2,   2,   2,   2,   3,
+    3,   3,   3,   3,   3,   4,   4,   4,   4,   5,   5,   5,   5,   5,   6,
+    6,   6,   6,   7,   7,   7,   8,   8,   8,   9,   9,   9,   10,  10,  10,
+    11,  11,  11,  12,  12,  13,  13,  13,  14,  14,  15,  15,  16,  16,  17,
+    17,  18,  18,  19,  19,  20,  20,  21,  21,  22,  22,  23,  24,  24,  25,
+    25,  26,  27,  27,  28,  29,  29,  30,  31,  31,  32,  33,  34,  34,  35,
+    36,  37,  38,  38,  39,  40,  41,  42,  42,  43,  44,  45,  46,  47,  48,
+    49,  50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,
+    64,  65,  66,  68,  69,  70,  71,  72,  73,  75,  76,  77,  78,  80,  81,
+    82,  84,  85,  86,  88,  89,  90,  92,  93,  94,  96,  97,  99,  100, 102,
+    103, 105, 106, 108, 109, 111, 112, 114, 115, 117, 119, 120, 122, 124, 125,
+    127, 129, 130, 132, 134, 136, 137, 139, 141, 143, 145, 146, 148, 150, 152,
+    154, 156, 158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180, 182,
+    184, 186, 188, 191, 193, 195, 197, 199, 202, 204, 206, 209, 211, 213, 215,
+    218, 220, 223, 225, 227, 230, 232, 235, 237, 240, 242, 245, 247, 250, 252,
+    255};
+
+/*!
+  @brief  Class that stores state and functions for interacting with
+          Adafruit DotStars and compatible devices.
+*/
+class Adafruit_DotStar {
+
+public:
+  Adafruit_DotStar(uint16_t n, uint8_t o = DOTSTAR_BRG);
+  Adafruit_DotStar(uint16_t n, uint8_t d, uint8_t c, uint8_t o = DOTSTAR_BRG);
+  ~Adafruit_DotStar(void);
+
+  void begin(void);
+  void show(void);
+  void setPixelColor(uint16_t n, uint32_t c);
+  void setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b);
+  void fill(uint32_t c = 0, uint16_t first = 0, uint16_t count = 0);
+  void setBrightness(uint8_t);
+  void clear();
+  void updateLength(uint16_t n);
+  void updatePins(void);
+  void updatePins(uint8_t d, uint8_t c);
+  /*!
+    @brief   Get a pointer directly to the DotStar data buffer in RAM.
+             Pixel data is stored in a device-native format (a la the
+             DOTSTAR_* constants) and is not translated here. Applications
+             that access this buffer will need to be aware of the specific
+             data format and handle colors appropriately.
+    @return  Pointer to DotStar buffer (uint8_t* array).
+    @note    This is for high-performance applications where calling
+             setPixelColor() on every single pixel would be too slow (e.g.
+             POV or light-painting projects). There is no bounds checking
+             on the array, creating tremendous potential for mayhem if one
+             writes past the ends of the buffer. Great power, great
+             responsibility and all that.
+  */
+  uint8_t *getPixels(void) const { return pixels; };
+  uint8_t getBrightness(void) const;
+  /*!
+    @brief   Return the number of pixels in an Adafruit_DotStar strip object.
+    @return  Pixel count (0 if not set).
+  */
+  uint16_t numPixels(void) const { return numLEDs; };
+  uint32_t getPixelColor(uint16_t n) const;
+  /*!
+    @brief   An 8-bit integer sine wave function, not directly compatible
+             with standard trigonometric units like radians or degrees.
+    @param   x  Input angle, 0-255; 256 would loop back to zero, completing
+                the circle (equivalent to 360 degrees or 2 pi radians).
+                One can therefore use an unsigned 8-bit variable and simply
+                add or subtract, allowing it to overflow/underflow and it
+                still does the expected contiguous thing.
+    @return  Sine result, 0 to 255, or -128 to +127 if type-converted to
+             a signed int8_t, but you'll most likely want unsigned as this
+             output is often used for pixel brightness in animation effects.
+  */
+  static uint8_t sine8(uint8_t x) {
+    return pgm_read_byte(&_DotStarSineTable[x]); // 0-255 in, 0-255 out
+  }
+  /*!
+    @brief   An 8-bit gamma-correction function for basic pixel brightness
+             adjustment. Makes color transitions appear more perceptially
+             correct.
+    @param   x  Input brightness, 0 (minimum or off/black) to 255 (maximum).
+    @return  Gamma-adjusted brightness, can then be passed to one of the
+             setPixelColor() functions. This uses a fixed gamma correction
+             exponent of 2.6, which seems reasonably okay for average
+             DotStars in average tasks. If you need finer control you'll
+             need to provide your own gamma-correction function instead.
+  */
+  static uint8_t gamma8(uint8_t x) {
+    return pgm_read_byte(&_DotStarGammaTable[x]); // 0-255 in, 0-255 out
+  }
+  /*!
+    @brief   Convert separate red, green and blue values into a single
+             "packed" 32-bit RGB color.
+    @param   r  Red brightness, 0 to 255.
+    @param   g  Green brightness, 0 to 255.
+    @param   b  Blue brightness, 0 to 255.
+    @return  32-bit packed RGB value, which can then be assigned to a
+             variable for later use or passed to the setPixelColor()
+             function. Packed RGB format is predictable, regardless of
+             LED strand color order.
+  */
+  static uint32_t Color(uint8_t r, uint8_t g, uint8_t b) {
+    return ((uint32_t)r << 16) | ((uint32_t)g << 8) | b;
+  }
+  static uint32_t ColorHSV(uint16_t hue, uint8_t sat = 255, uint8_t val = 255);
+  static uint32_t gamma32(uint32_t x);
+
+private:
+  uint16_t numLEDs;   ///< Number of pixels
+  uint8_t dataPin;    ///< If soft SPI, data pin #
+  uint8_t clockPin;   ///< If soft SPI, clock pin #
+  uint8_t brightness; ///< Global brightness setting
+  uint8_t *pixels;    ///< LED RGB values (3 bytes ea.)
+  uint8_t rOffset;    ///< Index of red in 3-byte pixel
+  uint8_t gOffset;    ///< Index of green byte
+  uint8_t bOffset;    ///< Index of blue byte
+#ifdef __AVR__
+  uint8_t dataPinMask;         ///< If soft SPI, data pin bitmask
+  uint8_t clockPinMask;        ///< If soft SPI, clock pin bitmask
+  volatile uint8_t *dataPort;  ///< If soft SPI, data PORT
+  volatile uint8_t *clockPort; ///< If soft SPI, clock PORT
+#endif
+  void hw_spi_init(void);     ///< Start hardware SPI
+  void hw_spi_end(void);      ///< Stop hardware SPI
+  void sw_spi_init(void);     ///< Start bitbang SPI
+  void sw_spi_out(uint8_t n); ///< Bitbang SPI write
+  void sw_spi_end(void);      ///< Stop bitbang SPI
+};
+
+#endif // _ADAFRUIT_DOT_STAR_H_

esp8266_deauther/src/Adafruit_DotStar-1.1.4/license.txt

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

esp8266_deauther/src/Adafruit_NeoPixel-1.7.0/Adafruit_NeoPixel.h

@@ -0,0 +1,366 @@
+/*!
+ * @file Adafruit_NeoPixel.h
+ *
+ * This is part of Adafruit's NeoPixel library for the Arduino platform,
+ * allowing a broad range of microcontroller boards (most AVR boards,
+ * many ARM devices, ESP8266 and ESP32, among others) to control Adafruit
+ * NeoPixels, FLORA RGB Smart Pixels and compatible devices -- WS2811,
+ * WS2812, WS2812B, SK6812, etc.
+ *
+ * Adafruit invests time and resources providing this open source code,
+ * please support Adafruit and open-source hardware by purchasing products
+ * from Adafruit!
+ *
+ * Written by Phil "Paint Your Dragon" Burgess for Adafruit Industries,
+ * with contributions by PJRC, Michael Miller and other members of the
+ * open source community.
+ *
+ * This file is part of the Adafruit_NeoPixel library.
+ *
+ * Adafruit_NeoPixel is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * Adafruit_NeoPixel is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with NeoPixel.  If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef ADAFRUIT_NEOPIXEL_H
+#define ADAFRUIT_NEOPIXEL_H
+
+#ifdef ARDUINO
+  #if (ARDUINO >= 100)
+  #include <Arduino.h>
+  #else
+  #include <WProgram.h>
+  #include <pins_arduino.h>
+  #endif
+#endif
+
+#ifdef TARGET_LPC1768
+  #include <Arduino.h>
+#endif
+
+// The order of primary colors in the NeoPixel data stream can vary among
+// device types, manufacturers and even different revisions of the same
+// item.  The third parameter to the Adafruit_NeoPixel constructor encodes
+// the per-pixel byte offsets of the red, green and blue primaries (plus
+// white, if present) in the data stream -- the following #defines provide
+// an easier-to-use named version for each permutation. e.g. NEO_GRB
+// indicates a NeoPixel-compatible device expecting three bytes per pixel,
+// with the first byte transmitted containing the green value, second
+// containing red and third containing blue. The in-memory representation
+// of a chain of NeoPixels is the same as the data-stream order; no
+// re-ordering of bytes is required when issuing data to the chain.
+// Most of these values won't exist in real-world devices, but it's done
+// this way so we're ready for it (also, if using the WS2811 driver IC,
+// one might have their pixels set up in any weird permutation).
+
+// Bits 5,4 of this value are the offset (0-3) from the first byte of a
+// pixel to the location of the red color byte.  Bits 3,2 are the green
+// offset and 1,0 are the blue offset.  If it is an RGBW-type device
+// (supporting a white primary in addition to R,G,B), bits 7,6 are the
+// offset to the white byte...otherwise, bits 7,6 are set to the same value
+// as 5,4 (red) to indicate an RGB (not RGBW) device.
+// i.e. binary representation:
+// 0bWWRRGGBB for RGBW devices
+// 0bRRRRGGBB for RGB
+
+// RGB NeoPixel permutations; white and red offsets are always same
+// Offset:         W        R        G        B
+#define NEO_RGB  ((0<<6) | (0<<4) | (1<<2) | (2)) ///< Transmit as R,G,B
+#define NEO_RBG  ((0<<6) | (0<<4) | (2<<2) | (1)) ///< Transmit as R,B,G
+#define NEO_GRB  ((1<<6) | (1<<4) | (0<<2) | (2)) ///< Transmit as G,R,B
+#define NEO_GBR  ((2<<6) | (2<<4) | (0<<2) | (1)) ///< Transmit as G,B,R
+#define NEO_BRG  ((1<<6) | (1<<4) | (2<<2) | (0)) ///< Transmit as B,R,G
+#define NEO_BGR  ((2<<6) | (2<<4) | (1<<2) | (0)) ///< Transmit as B,G,R
+
+// RGBW NeoPixel permutations; all 4 offsets are distinct
+// Offset:         W          R          G          B
+#define NEO_WRGB ((0<<6) | (1<<4) | (2<<2) | (3)) ///< Transmit as W,R,G,B
+#define NEO_WRBG ((0<<6) | (1<<4) | (3<<2) | (2)) ///< Transmit as W,R,B,G
+#define NEO_WGRB ((0<<6) | (2<<4) | (1<<2) | (3)) ///< Transmit as W,G,R,B
+#define NEO_WGBR ((0<<6) | (3<<4) | (1<<2) | (2)) ///< Transmit as W,G,B,R
+#define NEO_WBRG ((0<<6) | (2<<4) | (3<<2) | (1)) ///< Transmit as W,B,R,G
+#define NEO_WBGR ((0<<6) | (3<<4) | (2<<2) | (1)) ///< Transmit as W,B,G,R
+
+#define NEO_RWGB ((1<<6) | (0<<4) | (2<<2) | (3)) ///< Transmit as R,W,G,B
+#define NEO_RWBG ((1<<6) | (0<<4) | (3<<2) | (2)) ///< Transmit as R,W,B,G
+#define NEO_RGWB ((2<<6) | (0<<4) | (1<<2) | (3)) ///< Transmit as R,G,W,B
+#define NEO_RGBW ((3<<6) | (0<<4) | (1<<2) | (2)) ///< Transmit as R,G,B,W
+#define NEO_RBWG ((2<<6) | (0<<4) | (3<<2) | (1)) ///< Transmit as R,B,W,G
+#define NEO_RBGW ((3<<6) | (0<<4) | (2<<2) | (1)) ///< Transmit as R,B,G,W
+
+#define NEO_GWRB ((1<<6) | (2<<4) | (0<<2) | (3)) ///< Transmit as G,W,R,B
+#define NEO_GWBR ((1<<6) | (3<<4) | (0<<2) | (2)) ///< Transmit as G,W,B,R
+#define NEO_GRWB ((2<<6) | (1<<4) | (0<<2) | (3)) ///< Transmit as G,R,W,B
+#define NEO_GRBW ((3<<6) | (1<<4) | (0<<2) | (2)) ///< Transmit as G,R,B,W
+#define NEO_GBWR ((2<<6) | (3<<4) | (0<<2) | (1)) ///< Transmit as G,B,W,R
+#define NEO_GBRW ((3<<6) | (2<<4) | (0<<2) | (1)) ///< Transmit as G,B,R,W
+
+#define NEO_BWRG ((1<<6) | (2<<4) | (3<<2) | (0)) ///< Transmit as B,W,R,G
+#define NEO_BWGR ((1<<6) | (3<<4) | (2<<2) | (0)) ///< Transmit as B,W,G,R
+#define NEO_BRWG ((2<<6) | (1<<4) | (3<<2) | (0)) ///< Transmit as B,R,W,G
+#define NEO_BRGW ((3<<6) | (1<<4) | (2<<2) | (0)) ///< Transmit as B,R,G,W
+#define NEO_BGWR ((2<<6) | (3<<4) | (1<<2) | (0)) ///< Transmit as B,G,W,R
+#define NEO_BGRW ((3<<6) | (2<<4) | (1<<2) | (0)) ///< Transmit as B,G,R,W
+
+// Add NEO_KHZ400 to the color order value to indicate a 400 KHz device.
+// All but the earliest v1 NeoPixels expect an 800 KHz data stream, this is
+// the default if unspecified. Because flash space is very limited on ATtiny
+// devices (e.g. Trinket, Gemma), v1 NeoPixels aren't handled by default on
+// those chips, though it can be enabled by removing the ifndef/endif below,
+// but code will be bigger. Conversely, can disable the NEO_KHZ400 line on
+// other MCUs to remove v1 support and save a little space.
+
+#define NEO_KHZ800 0x0000 ///< 800 KHz data transmission
+#ifndef __AVR_ATtiny85__
+#define NEO_KHZ400 0x0100 ///< 400 KHz data transmission
+#endif
+
+// If 400 KHz support is enabled, the third parameter to the constructor
+// requires a 16-bit value (in order to select 400 vs 800 KHz speed).
+// If only 800 KHz is enabled (as is default on ATtiny), an 8-bit value
+// is sufficient to encode pixel color order, saving some space.
+
+#ifdef NEO_KHZ400
+typedef uint16_t neoPixelType; ///< 3rd arg to Adafruit_NeoPixel constructor
+#else
+typedef uint8_t  neoPixelType; ///< 3rd arg to Adafruit_NeoPixel constructor
+#endif
+
+// These two tables are declared outside the Adafruit_NeoPixel class
+// because some boards may require oldschool compilers that don't
+// handle the C++11 constexpr keyword.
+
+/* A PROGMEM (flash mem) table containing 8-bit unsigned sine wave (0-255).
+   Copy & paste this snippet into a Python REPL to regenerate:
+import math
+for x in range(256):
+    print("{:3},".format(int((math.sin(x/128.0*math.pi)+1.0)*127.5+0.5))),
+    if x&15 == 15: print
+*/
+static const uint8_t PROGMEM _NeoPixelSineTable[256] = {
+  128,131,134,137,140,143,146,149,152,155,158,162,165,167,170,173,
+  176,179,182,185,188,190,193,196,198,201,203,206,208,211,213,215,
+  218,220,222,224,226,228,230,232,234,235,237,238,240,241,243,244,
+  245,246,248,249,250,250,251,252,253,253,254,254,254,255,255,255,
+  255,255,255,255,254,254,254,253,253,252,251,250,250,249,248,246,
+  245,244,243,241,240,238,237,235,234,232,230,228,226,224,222,220,
+  218,215,213,211,208,206,203,201,198,196,193,190,188,185,182,179,
+  176,173,170,167,165,162,158,155,152,149,146,143,140,137,134,131,
+  128,124,121,118,115,112,109,106,103,100, 97, 93, 90, 88, 85, 82,
+   79, 76, 73, 70, 67, 65, 62, 59, 57, 54, 52, 49, 47, 44, 42, 40,
+   37, 35, 33, 31, 29, 27, 25, 23, 21, 20, 18, 17, 15, 14, 12, 11,
+   10,  9,  7,  6,  5,  5,  4,  3,  2,  2,  1,  1,  1,  0,  0,  0,
+    0,  0,  0,  0,  1,  1,  1,  2,  2,  3,  4,  5,  5,  6,  7,  9,
+   10, 11, 12, 14, 15, 17, 18, 20, 21, 23, 25, 27, 29, 31, 33, 35,
+   37, 40, 42, 44, 47, 49, 52, 54, 57, 59, 62, 65, 67, 70, 73, 76,
+   79, 82, 85, 88, 90, 93, 97,100,103,106,109,112,115,118,121,124};
+
+/* Similar to above, but for an 8-bit gamma-correction table.
+   Copy & paste this snippet into a Python REPL to regenerate:
+import math
+gamma=2.6
+for x in range(256):
+    print("{:3},".format(int(math.pow((x)/255.0,gamma)*255.0+0.5))),
+    if x&15 == 15: print
+*/
+static const uint8_t PROGMEM _NeoPixelGammaTable[256] = {
+    0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+    0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1,  1,  1,  1,
+    1,  1,  1,  1,  2,  2,  2,  2,  2,  2,  2,  2,  3,  3,  3,  3,
+    3,  3,  4,  4,  4,  4,  5,  5,  5,  5,  5,  6,  6,  6,  6,  7,
+    7,  7,  8,  8,  8,  9,  9,  9, 10, 10, 10, 11, 11, 11, 12, 12,
+   13, 13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 19, 19, 20,
+   20, 21, 21, 22, 22, 23, 24, 24, 25, 25, 26, 27, 27, 28, 29, 29,
+   30, 31, 31, 32, 33, 34, 34, 35, 36, 37, 38, 38, 39, 40, 41, 42,
+   42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+   58, 59, 60, 61, 62, 63, 64, 65, 66, 68, 69, 70, 71, 72, 73, 75,
+   76, 77, 78, 80, 81, 82, 84, 85, 86, 88, 89, 90, 92, 93, 94, 96,
+   97, 99,100,102,103,105,106,108,109,111,112,114,115,117,119,120,
+  122,124,125,127,129,130,132,134,136,137,139,141,143,145,146,148,
+  150,152,154,156,158,160,162,164,166,168,170,172,174,176,178,180,
+  182,184,186,188,191,193,195,197,199,202,204,206,209,211,213,215,
+  218,220,223,225,227,230,232,235,237,240,242,245,247,250,252,255};
+
+/*! 
+    @brief  Class that stores state and functions for interacting with
+            Adafruit NeoPixels and compatible devices.
+*/
+class Adafruit_NeoPixel {
+
+ public:
+
+  // Constructor: number of LEDs, pin number, LED type
+  Adafruit_NeoPixel(uint16_t n, uint16_t pin=6,
+    neoPixelType type=NEO_GRB + NEO_KHZ800);
+  Adafruit_NeoPixel(void);
+  ~Adafruit_NeoPixel();
+
+  void              begin(void);
+  void              show(void);
+  void              setPin(uint16_t p);
+  void              setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b);
+  void              setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b,
+                      uint8_t w);
+  void              setPixelColor(uint16_t n, uint32_t c);
+  void              fill(uint32_t c=0, uint16_t first=0, uint16_t count=0);
+  void              setBrightness(uint8_t);
+  void              clear(void);
+  void              updateLength(uint16_t n);
+  void              updateType(neoPixelType t);
+  /*!
+    @brief   Check whether a call to show() will start sending data
+             immediately or will 'block' for a required interval. NeoPixels
+             require a short quiet time (about 300 microseconds) after the
+             last bit is received before the data 'latches' and new data can
+             start being received. Usually one's sketch is implicitly using
+             this time to generate a new frame of animation...but if it
+             finishes very quickly, this function could be used to see if
+             there's some idle time available for some low-priority
+             concurrent task.
+    @return  1 or true if show() will start sending immediately, 0 or false
+             if show() would block (meaning some idle time is available).
+  */
+  bool canShow(void) {
+    if (endTime > micros()) {
+      endTime = micros();
+    }
+    return (micros() - endTime) >= 300L;
+  }
+  /*!
+    @brief   Get a pointer directly to the NeoPixel data buffer in RAM.
+             Pixel data is stored in a device-native format (a la the NEO_*
+             constants) and is not translated here. Applications that access
+             this buffer will need to be aware of the specific data format
+             and handle colors appropriately.
+    @return  Pointer to NeoPixel buffer (uint8_t* array).
+    @note    This is for high-performance applications where calling
+             setPixelColor() on every single pixel would be too slow (e.g.
+             POV or light-painting projects). There is no bounds checking
+             on the array, creating tremendous potential for mayhem if one
+             writes past the ends of the buffer. Great power, great
+             responsibility and all that.
+  */
+  uint8_t          *getPixels(void) const { return pixels; };
+  uint8_t           getBrightness(void) const;
+  /*!
+    @brief   Retrieve the pin number used for NeoPixel data output.
+    @return  Arduino pin number (-1 if not set).
+  */
+  int16_t           getPin(void) const { return pin; };
+  /*!
+    @brief   Return the number of pixels in an Adafruit_NeoPixel strip object.
+    @return  Pixel count (0 if not set).
+  */
+  uint16_t          numPixels(void) const { return numLEDs; }
+  uint32_t          getPixelColor(uint16_t n) const;
+  /*!
+    @brief   An 8-bit integer sine wave function, not directly compatible
+             with standard trigonometric units like radians or degrees.
+    @param   x  Input angle, 0-255; 256 would loop back to zero, completing
+                the circle (equivalent to 360 degrees or 2 pi radians).
+                One can therefore use an unsigned 8-bit variable and simply
+                add or subtract, allowing it to overflow/underflow and it
+                still does the expected contiguous thing.
+    @return  Sine result, 0 to 255, or -128 to +127 if type-converted to
+             a signed int8_t, but you'll most likely want unsigned as this
+             output is often used for pixel brightness in animation effects.
+  */
+  static uint8_t    sine8(uint8_t x) {
+    return pgm_read_byte(&_NeoPixelSineTable[x]); // 0-255 in, 0-255 out
+  }
+  /*!
+    @brief   An 8-bit gamma-correction function for basic pixel brightness
+             adjustment. Makes color transitions appear more perceptially
+             correct.
+    @param   x  Input brightness, 0 (minimum or off/black) to 255 (maximum).
+    @return  Gamma-adjusted brightness, can then be passed to one of the
+             setPixelColor() functions. This uses a fixed gamma correction
+             exponent of 2.6, which seems reasonably okay for average
+             NeoPixels in average tasks. If you need finer control you'll
+             need to provide your own gamma-correction function instead.
+  */
+  static uint8_t    gamma8(uint8_t x) {
+    return pgm_read_byte(&_NeoPixelGammaTable[x]); // 0-255 in, 0-255 out
+  }
+  /*!
+    @brief   Convert separate red, green and blue values into a single
+             "packed" 32-bit RGB color.
+    @param   r  Red brightness, 0 to 255.
+    @param   g  Green brightness, 0 to 255.
+    @param   b  Blue brightness, 0 to 255.
+    @return  32-bit packed RGB value, which can then be assigned to a
+             variable for later use or passed to the setPixelColor()
+             function. Packed RGB format is predictable, regardless of
+             LED strand color order.
+  */
+  static uint32_t   Color(uint8_t r, uint8_t g, uint8_t b) {
+    return ((uint32_t)r << 16) | ((uint32_t)g <<  8) | b;
+  }
+  /*!
+    @brief   Convert separate red, green, blue and white values into a
+             single "packed" 32-bit WRGB color.
+    @param   r  Red brightness, 0 to 255.
+    @param   g  Green brightness, 0 to 255.
+    @param   b  Blue brightness, 0 to 255.
+    @param   w  White brightness, 0 to 255.
+    @return  32-bit packed WRGB value, which can then be assigned to a
+             variable for later use or passed to the setPixelColor()
+             function. Packed WRGB format is predictable, regardless of
+             LED strand color order.
+  */
+  static uint32_t   Color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
+    return ((uint32_t)w << 24) | ((uint32_t)r << 16) | ((uint32_t)g <<  8) | b;
+  }
+  static uint32_t   ColorHSV(uint16_t hue, uint8_t sat=255, uint8_t val=255);
+  /*!
+    @brief   A gamma-correction function for 32-bit packed RGB or WRGB
+             colors. Makes color transitions appear more perceptially
+             correct.
+    @param   x  32-bit packed RGB or WRGB color.
+    @return  Gamma-adjusted packed color, can then be passed in one of the
+             setPixelColor() functions. Like gamma8(), this uses a fixed
+             gamma correction exponent of 2.6, which seems reasonably okay
+             for average NeoPixels in average tasks. If you need finer
+             control you'll need to provide your own gamma-correction
+             function instead.
+  */
+  static uint32_t   gamma32(uint32_t x);
+
+ protected:
+
+#ifdef NEO_KHZ400  // If 400 KHz NeoPixel support enabled...
+  bool              is800KHz;   ///< true if 800 KHz pixels
+#endif
+  bool              begun;      ///< true if begin() previously called
+  uint16_t          numLEDs;    ///< Number of RGB LEDs in strip
+  uint16_t          numBytes;   ///< Size of 'pixels' buffer below
+  int16_t           pin;        ///< Output pin number (-1 if not yet set)
+  uint8_t           brightness; ///< Strip brightness 0-255 (stored as +1)
+  uint8_t          *pixels;     ///< Holds LED color values (3 or 4 bytes each)
+  uint8_t           rOffset;    ///< Red index within each 3- or 4-byte pixel
+  uint8_t           gOffset;    ///< Index of green byte
+  uint8_t           bOffset;    ///< Index of blue byte
+  uint8_t           wOffset;    ///< Index of white (==rOffset if no white)
+  uint32_t          endTime;    ///< Latch timing reference
+#ifdef __AVR__
+  volatile uint8_t *port;       ///< Output PORT register
+  uint8_t           pinMask;    ///< Output PORT bitmask
+#endif
+#if defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_ARDUINO_CORE_STM32)
+  GPIO_TypeDef *gpioPort;       ///< Output GPIO PORT
+  uint32_t gpioPin;             ///< Output GPIO PIN
+#endif
+};
+
+#endif // ADAFRUIT_NEOPIXEL_H

esp8266_deauther/src/Adafruit_NeoPixel-1.7.0/COPYING

@@ -0,0 +1,165 @@
+                   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

esp8266_deauther/src/Adafruit_NeoPixel-1.7.0/esp8266.c

@@ -0,0 +1,86 @@
+// This is a mash-up of the Due show() code + insights from Michael Miller's
+// ESP8266 work for the NeoPixelBus library: github.com/Makuna/NeoPixelBus
+// Needs to be a separate .c file to enforce ICACHE_RAM_ATTR execution.
+
+#if defined(ESP8266)
+
+#include <Arduino.h>
+#ifdef ESP8266
+#include <eagle_soc.h>
+#endif
+
+static uint32_t _getCycleCount(void) __attribute__((always_inline));
+static inline uint32_t _getCycleCount(void) {
+  uint32_t ccount;
+  __asm__ __volatile__("rsr %0,ccount":"=a" (ccount));
+  return ccount;
+}
+
+#ifdef ESP8266
+void ICACHE_RAM_ATTR espShow(
+ uint8_t pin, uint8_t *pixels, uint32_t numBytes, boolean is800KHz) {
+#else
+void espShow(
+ uint8_t pin, uint8_t *pixels, uint32_t numBytes, boolean is800KHz) {
+#endif
+
+#define CYCLES_800_T0H  (F_CPU / 2500000) // 0.4us
+#define CYCLES_800_T1H  (F_CPU / 1250000) // 0.8us
+#define CYCLES_800      (F_CPU /  800000) // 1.25us per bit
+#define CYCLES_400_T0H  (F_CPU / 2000000) // 0.5uS
+#define CYCLES_400_T1H  (F_CPU /  833333) // 1.2us
+#define CYCLES_400      (F_CPU /  400000) // 2.5us per bit
+
+  uint8_t *p, *end, pix, mask;
+  uint32_t t, time0, time1, period, c, startTime;
+
+#ifdef ESP8266
+  uint32_t pinMask;
+  pinMask   = _BV(pin);
+#endif
+
+  p         =  pixels;
+  end       =  p + numBytes;
+  pix       = *p++;
+  mask      = 0x80;
+  startTime = 0;
+
+#ifdef NEO_KHZ400
+  if(is800KHz) {
+#endif
+    time0  = CYCLES_800_T0H;
+    time1  = CYCLES_800_T1H;
+    period = CYCLES_800;
+#ifdef NEO_KHZ400
+  } else { // 400 KHz bitstream
+    time0  = CYCLES_400_T0H;
+    time1  = CYCLES_400_T1H;
+    period = CYCLES_400;
+  }
+#endif
+
+  for(t = time0;; t = time0) {
+    if(pix & mask) t = time1;                             // Bit high duration
+    while(((c = _getCycleCount()) - startTime) < period); // Wait for bit start
+#ifdef ESP8266
+    GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, pinMask);       // Set high
+#else
+    gpio_set_level(pin, HIGH);
+#endif
+    startTime = c;                                        // Save start time
+    while(((c = _getCycleCount()) - startTime) < t);      // Wait high duration
+#ifdef ESP8266
+    GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pinMask);       // Set low
+#else
+    gpio_set_level(pin, LOW);
+#endif
+    if(!(mask >>= 1)) {                                   // Next bit/byte
+      if(p >= end) break;
+      pix  = *p++;
+      mask = 0x80;
+    }
+  }
+  while((_getCycleCount() - startTime) < period); // Wait for last bit
+}
+
+#endif // ESP8266

esp8266_deauther/src/DS3231-1.0.3/DS3231.cpp

@@ -0,0 +1,738 @@
+/*
+   DS3231.cpp: DS3231 Real-Time Clock library
+   Eric Ayars
+   4/1/11
+
+   Spliced in DateTime all-at-once reading (to avoid rollover) and unix time
+   from Jean-Claude Wippler and Limor Fried
+   Andy Wickert
+   5/15/11
+
+   Fixed problem with SD processors(no function call) by replacing all occurences of the term PM, which
+   is defined as a macro on SAMD controllers by PM_time.
+   Simon Gassner
+   11/28/2017
+
+
+   Released into the public domain.
+ */
+
+#include "DS3231.h"
+
+// These included for the DateTime class inclusion; will try to find a way to
+// not need them in the future...
+#if defined(__AVR__)
+#include <avr/pgmspace.h>
+#elif defined(ESP8266)
+#include <pgmspace.h>
+#endif // if defined(__AVR__)
+// Changed the following to work on 1.0
+// #include "WProgram.h"
+#include <Arduino.h>
+
+
+#define CLOCK_ADDRESS 0x68
+
+#define SECONDS_FROM_1970_TO_2000 946684800
+
+
+// Constructor
+DS3231::DS3231() {
+    // nothing to do for this constructor.
+}
+
+// Utilities from JeeLabs/Ladyada
+
+////////////////////////////////////////////////////////////////////////////////
+// utility code, some of this could be exposed in the DateTime API if needed
+
+// DS3231 is smart enough to know this, but keeping it for now so I don't have
+// to rewrite their code. -ADW
+static const uint8_t daysInMonth[] PROGMEM = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+// number of days since 2000/01/01, valid for 2001..2099
+static uint16_t date2days(uint16_t y, uint8_t m, uint8_t d) {
+    if (y >= 2000)
+        y -= 2000;
+    uint16_t days = d;
+
+    for (uint8_t i = 1; i < m; ++i) days += pgm_read_byte(daysInMonth + i - 1);
+    if ((m > 2) && (y % 4 == 0))
+        ++days;
+    return days + 365 * y + (y + 3) / 4 - 1;
+}
+
+static long time2long(uint16_t days, uint8_t h, uint8_t m, uint8_t s) {
+    return ((days * 24L + h) * 60 + m) * 60 + s;
+}
+
+/*****************************************
+        Public Functions
+*****************************************/
+
+/*******************************************************************************
+ * TO GET ALL DATE/TIME INFORMATION AT ONCE AND AVOID THE CHANCE OF ROLLOVER
+ * DateTime implementation spliced in here from Jean-Claude Wippler's (JeeLabs)
+ * RTClib, as modified by Limor Fried (Ladyada); source code at:
+ * https://github.com/adafruit/RTClib
+ ******************************************************************************/
+
+////////////////////////////////////////////////////////////////////////////////
+// DateTime implementation - ignores time zones and DST changes
+// NOTE: also ignores leap seconds, see http://en.wikipedia.org/wiki/Leap_second
+
+DateTime::DateTime(uint32_t t) {
+    t -= SECONDS_FROM_1970_TO_2000; // bring to 2000 timestamp from 1970
+
+    ss = t % 60;
+    t /= 60;
+    mm = t % 60;
+    t /= 60;
+    hh = t % 24;
+    uint16_t days = t / 24;
+    uint8_t  leap;
+
+    for (yOff = 0;; ++yOff) {
+        leap = yOff % 4 == 0;
+        if (days < 365 + leap)
+            break;
+        days -= 365 + leap;
+    }
+
+    for (m = 1;; ++m) {
+        uint8_t daysPerMonth = pgm_read_byte(daysInMonth + m - 1);
+        if (leap && (m == 2))
+            ++daysPerMonth;
+        if (days < daysPerMonth)
+            break;
+        days -= daysPerMonth;
+    }
+    d = days + 1;
+}
+
+DateTime::DateTime(uint16_t year, uint8_t month, uint8_t day, uint8_t hour, uint8_t min, uint8_t sec) {
+    if (year >= 2000)
+        year -= 2000;
+    yOff = year;
+    m    = month;
+    d    = day;
+    hh   = hour;
+    mm   = min;
+    ss   = sec;
+}
+
+static uint8_t conv2d(const char* p) {
+    uint8_t v = 0;
+
+    if (('0' <= *p) && (*p <= '9'))
+        v = *p - '0';
+    return 10 * v + *++p - '0';
+}
+
+// UNIX time: IS CORRECT ONLY WHEN SET TO UTC!!!
+uint32_t DateTime::unixtime(void) const {
+    uint32_t t;
+    uint16_t days = date2days(yOff, m, d);
+
+    t  = time2long(days, hh, mm, ss);
+    t += SECONDS_FROM_1970_TO_2000; // seconds from 1970 to 2000
+
+    return t;
+}
+
+// Slightly modified from JeeLabs / Ladyada
+// Get all date/time at once to avoid rollover (e.g., minute/second don't match)
+static uint8_t bcd2bin(uint8_t val) {
+    return val - 6 * (val >> 4);
+}
+
+static uint8_t bin2bcd(uint8_t val) {
+    return val + 6 * (val / 10);
+}
+
+DateTime RTClib::now() {
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0); // This is the first register address (Seconds)
+                   // We'll read from here on for 7 bytes: secs reg, minutes reg, hours, days, months and years.
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 7);
+    uint8_t ss = bcd2bin(Wire.read() & 0x7F);
+    uint8_t mm = bcd2bin(Wire.read());
+    uint8_t hh = bcd2bin(Wire.read());
+
+    Wire.read();
+    uint8_t  d = bcd2bin(Wire.read());
+    uint8_t  m = bcd2bin(Wire.read());
+    uint16_t y = bcd2bin(Wire.read()) + 2000;
+
+    return DateTime(y, m, d, hh, mm, ss);
+}
+
+///// ERIC'S ORIGINAL CODE FOLLOWS /////
+
+byte DS3231::getSecond() {
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x00);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    return bcdToDec(Wire.read());
+}
+
+byte DS3231::getMinute() {
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x01);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    return bcdToDec(Wire.read());
+}
+
+byte DS3231::getHour(bool& h12, bool& PM_time) {
+    byte temp_buffer;
+    byte hour;
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x02);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    temp_buffer = Wire.read();
+    h12         = temp_buffer & 0b01000000;
+    if (h12) {
+        PM_time = temp_buffer & 0b00100000;
+        hour    = bcdToDec(temp_buffer & 0b00011111);
+    } else {
+        hour = bcdToDec(temp_buffer & 0b00111111);
+    }
+    return hour;
+}
+
+byte DS3231::getDoW() {
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x03);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    return bcdToDec(Wire.read());
+}
+
+byte DS3231::getDate() {
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x04);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    return bcdToDec(Wire.read());
+}
+
+byte DS3231::getMonth(bool& Century) {
+    byte temp_buffer;
+    byte hour;
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x05);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    temp_buffer = Wire.read();
+    Century     = temp_buffer & 0b10000000;
+    return bcdToDec(temp_buffer & 0b01111111);
+}
+
+byte DS3231::getYear() {
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x06);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    return bcdToDec(Wire.read());
+}
+
+void DS3231::setSecond(byte Second) {
+    // Sets the seconds
+    // This function also resets the Oscillator Stop Flag, which is set
+    // whenever power is interrupted.
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x00);
+    Wire.write(decToBcd(Second));
+    Wire.endTransmission();
+    // Clear OSF flag
+    byte temp_buffer = readControlByte(1);
+
+    writeControlByte((temp_buffer & 0b01111111), 1);
+}
+
+void DS3231::setMinute(byte Minute) {
+    // Sets the minutes
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x01);
+    Wire.write(decToBcd(Minute));
+    Wire.endTransmission();
+}
+
+void DS3231::setHour(byte Hour) {
+    // Sets the hour, without changing 12/24h mode.
+    // The hour must be in 24h format.
+
+    bool h12;
+
+    // Start by figuring out what the 12/24 mode is
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x02);
+    Wire.endTransmission();
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    h12 = (Wire.read() & 0b01000000);
+    // if h12 is true, it's 12h mode; false is 24h.
+
+    if (h12) {
+        // 12 hour
+        if (Hour > 12) {
+            Hour = decToBcd(Hour-12) | 0b01100000;
+        } else {
+            Hour = decToBcd(Hour) & 0b11011111;
+        }
+    } else {
+        // 24 hour
+        Hour = decToBcd(Hour) & 0b10111111;
+    }
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x02);
+    Wire.write(Hour);
+    Wire.endTransmission();
+}
+
+void DS3231::setDoW(byte DoW) {
+    // Sets the Day of Week
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x03);
+    Wire.write(decToBcd(DoW));
+    Wire.endTransmission();
+}
+
+void DS3231::setDate(byte Date) {
+    // Sets the Date
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x04);
+    Wire.write(decToBcd(Date));
+    Wire.endTransmission();
+}
+
+void DS3231::setMonth(byte Month) {
+    // Sets the month
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x05);
+    Wire.write(decToBcd(Month));
+    Wire.endTransmission();
+}
+
+void DS3231::setYear(byte Year) {
+    // Sets the year
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x06);
+    Wire.write(decToBcd(Year));
+    Wire.endTransmission();
+}
+
+void DS3231::setClockMode(bool h12) {
+    // sets the mode to 12-hour (true) or 24-hour (false).
+    // One thing that bothers me about how I've written this is that
+    // if the read and right happen at the right hourly millisecnd,
+    // the clock will be set back an hour. Not sure how to do it better,
+    // though, and as long as one doesn't set the mode frequently it's
+    // a very minimal risk.
+    // It's zero risk if you call this BEFORE setting the hour, since
+    // the setHour() function doesn't change this mode.
+
+    byte temp_buffer;
+
+    // Start by reading byte 0x02.
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x02);
+    Wire.endTransmission();
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    temp_buffer = Wire.read();
+
+    // Set the flag to the requested value:
+    if (h12) {
+        temp_buffer = temp_buffer | 0b01000000;
+    } else {
+        temp_buffer = temp_buffer & 0b10111111;
+    }
+
+    // Write the byte
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x02);
+    Wire.write(temp_buffer);
+    Wire.endTransmission();
+}
+
+float DS3231::getTemperature() {
+    // Checks the internal thermometer on the DS3231 and returns the
+    // temperature as a floating-point value.
+
+    // Updated / modified a tiny bit from "Coding Badly" and "Tri-Again"
+    // http://forum.arduino.cc/index.php/topic,22301.0.html
+
+    byte  tMSB, tLSB;
+    float temp3231;
+
+    // temp registers (11h-12h) get updated automatically every 64s
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x11);
+    Wire.endTransmission();
+    Wire.requestFrom(CLOCK_ADDRESS, 2);
+
+    // Should I do more "if available" checks here?
+    if (Wire.available()) {
+        tMSB = Wire.read(); // 2's complement int portion
+        tLSB = Wire.read(); // fraction portion
+
+        temp3231 = ((((short)tMSB << 8) | (short)tLSB) >> 6) / 4.0;
+    }
+    else {
+        temp3231 = -9999; // Some obvious error value
+    }
+
+    return temp3231;
+}
+
+void DS3231::getA1Time(byte& A1Day, byte& A1Hour, byte& A1Minute, byte& A1Second, byte& AlarmBits, bool& A1Dy, bool& A1h12, bool& A1PM) {
+    byte temp_buffer;
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x07);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 4);
+
+    temp_buffer = Wire.read(); // Get A1M1 and A1 Seconds
+    A1Second    = bcdToDec(temp_buffer & 0b01111111);
+    // put A1M1 bit in position 0 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>7;
+
+    temp_buffer = Wire.read(); // Get A1M2 and A1 minutes
+    A1Minute    = bcdToDec(temp_buffer & 0b01111111);
+    // put A1M2 bit in position 1 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>6;
+
+    temp_buffer = Wire.read(); // Get A1M3 and A1 Hour
+    // put A1M3 bit in position 2 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>5;
+    // determine A1 12/24 mode
+    A1h12 = temp_buffer & 0b01000000;
+    if (A1h12) {
+        A1PM   = temp_buffer & 0b00100000;           // determine am/pm
+        A1Hour = bcdToDec(temp_buffer & 0b00011111); // 12-hour
+    } else {
+        A1Hour = bcdToDec(temp_buffer & 0b00111111); // 24-hour
+    }
+
+    temp_buffer = Wire.read();                       // Get A1M4 and A1 Day/Date
+    // put A1M3 bit in position 3 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>4;
+    // determine A1 day or date flag
+    A1Dy = (temp_buffer & 0b01000000)>>6;
+    if (A1Dy) {
+        // alarm is by day of week, not date.
+        A1Day = bcdToDec(temp_buffer & 0b00001111);
+    } else {
+        // alarm is by date, not day of week.
+        A1Day = bcdToDec(temp_buffer & 0b00111111);
+    }
+}
+
+void DS3231::getA2Time(byte& A2Day, byte& A2Hour, byte& A2Minute, byte& AlarmBits, bool& A2Dy, bool& A2h12, bool& A2PM) {
+    byte temp_buffer;
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x0b);
+    Wire.endTransmission();
+
+    Wire.requestFrom(CLOCK_ADDRESS, 3);
+    temp_buffer = Wire.read(); // Get A2M2 and A2 Minutes
+    A2Minute    = bcdToDec(temp_buffer & 0b01111111);
+    // put A2M2 bit in position 4 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>3;
+
+    temp_buffer = Wire.read(); // Get A2M3 and A2 Hour
+    // put A2M3 bit in position 5 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>2;
+    // determine A2 12/24 mode
+    A2h12 = temp_buffer & 0b01000000;
+    if (A2h12) {
+        A2PM   = temp_buffer & 0b00100000;           // determine am/pm
+        A2Hour = bcdToDec(temp_buffer & 0b00011111); // 12-hour
+    } else {
+        A2Hour = bcdToDec(temp_buffer & 0b00111111); // 24-hour
+    }
+
+    temp_buffer = Wire.read();                       // Get A2M4 and A1 Day/Date
+    // put A2M4 bit in position 6 of DS3231_AlarmBits.
+    AlarmBits = AlarmBits | (temp_buffer & 0b10000000)>>1;
+    // determine A2 day or date flag
+    A2Dy = (temp_buffer & 0b01000000)>>6;
+    if (A2Dy) {
+        // alarm is by day of week, not date.
+        A2Day = bcdToDec(temp_buffer & 0b00001111);
+    } else {
+        // alarm is by date, not day of week.
+        A2Day = bcdToDec(temp_buffer & 0b00111111);
+    }
+}
+
+void DS3231::setA1Time(byte A1Day, byte A1Hour, byte A1Minute, byte A1Second, byte AlarmBits, bool A1Dy, bool A1h12, bool A1PM) {
+    //	Sets the alarm-1 date and time on the DS3231, using A1* information
+    byte temp_buffer;
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x07); // A1 starts at 07h
+    // Send A1 second and A1M1
+    Wire.write(decToBcd(A1Second) | ((AlarmBits & 0b00000001) << 7));
+    // Send A1 Minute and A1M2
+    Wire.write(decToBcd(A1Minute) | ((AlarmBits & 0b00000010) << 6));
+    // Figure out A1 hour
+    if (A1h12) {
+        // Start by converting existing time to h12 if it was given in 24h.
+        if (A1Hour > 12) {
+            // well, then, this obviously isn't a h12 time, is it?
+            A1Hour = A1Hour - 12;
+            A1PM   = true;
+        }
+        if (A1PM) {
+            // Afternoon
+            // Convert the hour to BCD and add appropriate flags.
+            temp_buffer = decToBcd(A1Hour) | 0b01100000;
+        } else {
+            // Morning
+            // Convert the hour to BCD and add appropriate flags.
+            temp_buffer = decToBcd(A1Hour) | 0b01000000;
+        }
+    } else {
+        // Now for 24h
+        temp_buffer = decToBcd(A1Hour);
+    }
+    temp_buffer = temp_buffer | ((AlarmBits & 0b00000100)<<5);
+    // A1 hour is figured out, send it
+    Wire.write(temp_buffer);
+    // Figure out A1 day/date and A1M4
+    temp_buffer = ((AlarmBits & 0b00001000)<<4) | decToBcd(A1Day);
+    if (A1Dy) {
+        // Set A1 Day/Date flag (Otherwise it's zero)
+        temp_buffer = temp_buffer | 0b01000000;
+    }
+    Wire.write(temp_buffer);
+    // All done!
+    Wire.endTransmission();
+}
+
+void DS3231::setA2Time(byte A2Day, byte A2Hour, byte A2Minute, byte AlarmBits, bool A2Dy, bool A2h12, bool A2PM) {
+    //	Sets the alarm-2 date and time on the DS3231, using A2* information
+    byte temp_buffer;
+
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    Wire.write(0x0b); // A1 starts at 0bh
+    // Send A2 Minute and A2M2
+    Wire.write(decToBcd(A2Minute) | ((AlarmBits & 0b00010000) << 3));
+    // Figure out A2 hour
+    if (A2h12) {
+        // Start by converting existing time to h12 if it was given in 24h.
+        if (A2Hour > 12) {
+            // well, then, this obviously isn't a h12 time, is it?
+            A2Hour = A2Hour - 12;
+            A2PM   = true;
+        }
+        if (A2PM) {
+            // Afternoon
+            // Convert the hour to BCD and add appropriate flags.
+            temp_buffer = decToBcd(A2Hour) | 0b01100000;
+        } else {
+            // Morning
+            // Convert the hour to BCD and add appropriate flags.
+            temp_buffer = decToBcd(A2Hour) | 0b01000000;
+        }
+    } else {
+        // Now for 24h
+        temp_buffer = decToBcd(A2Hour);
+    }
+    // add in A2M3 bit
+    temp_buffer = temp_buffer | ((AlarmBits & 0b00100000)<<2);
+    // A2 hour is figured out, send it
+    Wire.write(temp_buffer);
+    // Figure out A2 day/date and A2M4
+    temp_buffer = ((AlarmBits & 0b01000000)<<1) | decToBcd(A2Day);
+    if (A2Dy) {
+        // Set A2 Day/Date flag (Otherwise it's zero)
+        temp_buffer = temp_buffer | 0b01000000;
+    }
+    Wire.write(temp_buffer);
+    // All done!
+    Wire.endTransmission();
+}
+
+void DS3231::turnOnAlarm(byte Alarm) {
+    // turns on alarm number "Alarm". Defaults to 2 if Alarm is not 1.
+    byte temp_buffer = readControlByte(0);
+
+    // modify control byte
+    if (Alarm == 1) {
+        temp_buffer = temp_buffer | 0b00000101;
+    } else {
+        temp_buffer = temp_buffer | 0b00000110;
+    }
+    writeControlByte(temp_buffer, 0);
+}
+
+void DS3231::turnOffAlarm(byte Alarm) {
+    // turns off alarm number "Alarm". Defaults to 2 if Alarm is not 1.
+    // Leaves interrupt pin alone.
+    byte temp_buffer = readControlByte(0);
+
+    // modify control byte
+    if (Alarm == 1) {
+        temp_buffer = temp_buffer & 0b11111110;
+    } else {
+        temp_buffer = temp_buffer & 0b11111101;
+    }
+    writeControlByte(temp_buffer, 0);
+}
+
+bool DS3231::checkAlarmEnabled(byte Alarm) {
+    // Checks whether the given alarm is enabled.
+    byte result      = 0x0;
+    byte temp_buffer = readControlByte(0);
+
+    if (Alarm == 1) {
+        result = temp_buffer & 0b00000001;
+    } else {
+        result = temp_buffer & 0b00000010;
+    }
+    return result;
+}
+
+bool DS3231::checkIfAlarm(byte Alarm) {
+    // Checks whether alarm 1 or alarm 2 flag is on, returns T/F accordingly.
+    // Turns flag off, also.
+    // defaults to checking alarm 2, unless Alarm == 1.
+    byte result;
+    byte temp_buffer = readControlByte(1);
+
+    if (Alarm == 1) {
+        // Did alarm 1 go off?
+        result = temp_buffer & 0b00000001;
+        // clear flag
+        temp_buffer = temp_buffer & 0b11111110;
+    } else {
+        // Did alarm 2 go off?
+        result = temp_buffer & 0b00000010;
+        // clear flag
+        temp_buffer = temp_buffer & 0b11111101;
+    }
+    writeControlByte(temp_buffer, 1);
+    return result;
+}
+
+void DS3231::enableOscillator(bool TF, bool battery, byte frequency) {
+    // turns oscillator on or off. True is on, false is off.
+    // if battery is true, turns on even for battery-only operation,
+    // otherwise turns off if Vcc is off.
+    // frequency must be 0, 1, 2, or 3.
+    // 0 = 1 Hz
+    // 1 = 1.024 kHz
+    // 2 = 4.096 kHz
+    // 3 = 8.192 kHz (Default if frequency byte is out of range)
+    if (frequency > 3) frequency = 3;
+    // read control byte in, but zero out current state of RS2 and RS1.
+    byte temp_buffer = readControlByte(0) & 0b11100111;
+
+    if (battery) {
+        // turn on BBSQW flag
+        temp_buffer = temp_buffer | 0b01000000;
+    } else {
+        // turn off BBSQW flag
+        temp_buffer = temp_buffer & 0b10111111;
+    }
+    if (TF) {
+        // set ~EOSC to 0 and INTCN to zero.
+        temp_buffer = temp_buffer & 0b01111011;
+    } else {
+        // set ~EOSC to 1, leave INTCN as is.
+        temp_buffer = temp_buffer | 0b10000000;
+    }
+    // shift frequency into bits 3 and 4 and set.
+    frequency   = frequency << 3;
+    temp_buffer = temp_buffer | frequency;
+    // And write the control bits
+    writeControlByte(temp_buffer, 0);
+}
+
+void DS3231::enable32kHz(bool TF) {
+    // turn 32kHz pin on or off
+    byte temp_buffer = readControlByte(1);
+
+    if (TF) {
+        // turn on 32kHz pin
+        temp_buffer = temp_buffer | 0b00001000;
+    } else {
+        // turn off 32kHz pin
+        temp_buffer = temp_buffer & 0b11110111;
+    }
+    writeControlByte(temp_buffer, 1);
+}
+
+bool DS3231::oscillatorCheck() {
+    // Returns false if the oscillator has been off for some reason.
+    // If this is the case, the time is probably not correct.
+    byte temp_buffer = readControlByte(1);
+    bool result      = true;
+
+    if (temp_buffer & 0b10000000) {
+        // Oscillator Stop Flag (OSF) is set, so return false.
+        result = false;
+    }
+    return result;
+}
+
+/*****************************************
+        Private Functions
+*****************************************/
+byte DS3231::decToBcd(byte val) {
+    // Convert normal decimal numbers to binary coded decimal
+    return (val/10*16) + (val%10);
+}
+
+byte DS3231::bcdToDec(byte val) {
+    // Convert binary coded decimal to normal decimal numbers
+    return (val/16*10) + (val%16);
+}
+
+byte DS3231::readControlByte(bool which) {
+    // Read selected control byte
+    // first byte (0) is 0x0e, second (1) is 0x0f
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    if (which) {
+        // second control byte
+        Wire.write(0x0f);
+    } else {
+        // first control byte
+        Wire.write(0x0e);
+    }
+    Wire.endTransmission();
+    Wire.requestFrom(CLOCK_ADDRESS, 1);
+    return Wire.read();
+}
+
+void DS3231::writeControlByte(byte control, bool which) {
+    // Write the selected control byte.
+    // which=false -> 0x0e, true->0x0f.
+    Wire.beginTransmission(CLOCK_ADDRESS);
+    if (which) {
+        Wire.write(0x0f);
+    } else {
+        Wire.write(0x0e);
+    }
+    Wire.write(control);
+    Wire.endTransmission();
+}

esp8266_deauther/src/DS3231-1.0.3/DS3231.h

@@ -0,0 +1,183 @@
+/*
+ * DS3231.h
+ *
+ * Arduino Library for the DS3231 Real-Time Clock chip
+ *
+ * (c) Eric Ayars
+ * 4/1/11
+ * released into the public domain. If you use this, please let me know
+ * (just out of pure curiosity!) by sending me an email:
+ * eric@ayars.org
+ *
+ */
+
+// Modified by Andy Wickert 5/15/11: Spliced in stuff from RTClib
+// Modified by Simon Gassner 11/28/2017: Changed Term "PM" to "PM_time" for compability with SAMD Processors
+#ifndef DS3231_h
+#define DS3231_h
+
+// Changed the following to work on 1.0
+//#include "WProgram.h"
+#include <Arduino.h>
+
+#include <Wire.h>
+
+// DateTime (get everything at once) from JeeLabs / Adafruit
+// Simple general-purpose date/time class (no TZ / DST / leap second handling!)
+class DateTime {
+public:
+    DateTime (uint32_t t =0);
+    DateTime (uint16_t year, uint8_t month, uint8_t day,
+                uint8_t hour =0, uint8_t min =0, uint8_t sec =0);
+    DateTime (const char* date, const char* time);
+    uint16_t year() const       { return 2000 + yOff; }
+    uint8_t month() const       { return m; }
+    uint8_t day() const         { return d; }
+    uint8_t hour() const        { return hh; }
+    uint8_t minute() const      { return mm; }
+    uint8_t second() const      { return ss; }
+    uint8_t dayOfTheWeek() const;
+
+    // 32-bit times as seconds since 1/1/2000
+    long secondstime() const;
+    // 32-bit times as seconds since 1/1/1970
+    // THE ABOVE COMMENT IS CORRECT FOR LOCAL TIME; TO USE THIS COMMAND TO
+    // OBTAIN TRUE UNIX TIME SINCE EPOCH, YOU MUST CALL THIS COMMAND AFTER
+    // SETTING YOUR CLOCK TO UTC
+    uint32_t unixtime(void) const;
+
+protected:
+    uint8_t yOff, m, d, hh, mm, ss;
+};
+
+class RTClib {
+  public:
+		// Get date and time snapshot
+    static DateTime now();
+};
+
+// Eric's original code is everything below this line
+class DS3231 {
+	public:
+			
+		//Constructor
+		DS3231();
+
+		// Time-retrieval functions
+    
+		// the get*() functions retrieve current values of the registers.
+		byte getSecond(); 
+		byte getMinute(); 
+		byte getHour(bool& h12, bool& PM_time); 
+			// In addition to returning the hour register, this function
+			// returns the values of the 12/24-hour flag and the AM/PM flag.
+		byte getDoW(); 
+		byte getDate(); 
+		byte getMonth(bool& Century); 
+			// Also sets the flag indicating century roll-over.
+		byte getYear(); 
+			// Last 2 digits only
+
+		// Time-setting functions
+		// Note that none of these check for sensibility: You can set the
+		// date to July 42nd and strange things will probably result.
+		
+		void setSecond(byte Second); 
+			// In addition to setting the seconds, this clears the 
+			// "Oscillator Stop Flag".
+		void setMinute(byte Minute); 
+			// Sets the minute
+		void setHour(byte Hour); 
+			// Sets the hour
+		void setDoW(byte DoW); 
+			// Sets the Day of the Week (1-7);
+		void setDate(byte Date); 
+			// Sets the Date of the Month
+		void setMonth(byte Month); 
+			// Sets the Month of the year
+		void setYear(byte Year); 
+			// Last two digits of the year
+		void setClockMode(bool h12); 
+			// Set 12/24h mode. True is 12-h, false is 24-hour.
+
+		// Temperature function
+
+		float getTemperature(); 
+
+		// Alarm functions
+		
+		void getA1Time(byte& A1Day, byte& A1Hour, byte& A1Minute, byte& A1Second, byte& AlarmBits, bool& A1Dy, bool& A1h12, bool& A1PM); 
+/* Retrieves everything you could want to know about alarm
+ * one. 
+ * A1Dy true makes the alarm go on A1Day = Day of Week,
+ * A1Dy false makes the alarm go on A1Day = Date of month.
+ *
+ * byte AlarmBits sets the behavior of the alarms:
+ *	Dy	A1M4	A1M3	A1M2	A1M1	Rate
+ *	X	1		1		1		1		Once per second
+ *	X	1		1		1		0		Alarm when seconds match
+ *	X	1		1		0		0		Alarm when min, sec match
+ *	X	1		0		0		0		Alarm when hour, min, sec match
+ *	0	0		0		0		0		Alarm when date, h, m, s match
+ *	1	0		0		0		0		Alarm when DoW, h, m, s match
+ *
+ *	Dy	A2M4	A2M3	A2M2	Rate
+ *	X	1		1		1		Once per minute (at seconds = 00)
+ *	X	1		1		0		Alarm when minutes match
+ *	X	1		0		0		Alarm when hours and minutes match
+ *	0	0		0		0		Alarm when date, hour, min match
+ *	1	0		0		0		Alarm when DoW, hour, min match
+ */
+		void getA2Time(byte& A2Day, byte& A2Hour, byte& A2Minute, byte& AlarmBits, bool& A2Dy, bool& A2h12, bool& A2PM); 
+			// Same as getA1Time();, but A2 only goes on seconds == 00.
+		void setA1Time(byte A1Day, byte A1Hour, byte A1Minute, byte A1Second, byte AlarmBits, bool A1Dy, bool A1h12, bool A1PM); 
+			// Set the details for Alarm 1
+		void setA2Time(byte A2Day, byte A2Hour, byte A2Minute, byte AlarmBits, bool A2Dy, bool A2h12, bool A2PM); 
+			// Set the details for Alarm 2
+		void turnOnAlarm(byte Alarm); 
+			// Enables alarm 1 or 2 and the external interrupt pin.
+			// If Alarm != 1, it assumes Alarm == 2.
+		void turnOffAlarm(byte Alarm); 
+			// Disables alarm 1 or 2 (default is 2 if Alarm != 1);
+			// and leaves the interrupt pin alone.
+		bool checkAlarmEnabled(byte Alarm); 
+			// Returns T/F to indicate whether the requested alarm is
+			// enabled. Defaults to 2 if Alarm != 1.
+		bool checkIfAlarm(byte Alarm); 
+			// Checks whether the indicated alarm (1 or 2, 2 default);
+			// has been activated.
+
+		// Oscillator functions
+
+		void enableOscillator(bool TF, bool battery, byte frequency); 
+			// turns oscillator on or off. True is on, false is off.
+			// if battery is true, turns on even for battery-only operation,
+			// otherwise turns off if Vcc is off.
+			// frequency must be 0, 1, 2, or 3.
+			// 0 = 1 Hz
+			// 1 = 1.024 kHz
+			// 2 = 4.096 kHz
+			// 3 = 8.192 kHz (Default if frequency byte is out of range);
+		void enable32kHz(bool TF); 
+			// Turns the 32kHz output pin on (true); or off (false).
+		bool oscillatorCheck();;
+			// Checks the status of the OSF (Oscillator Stop Flag);.
+			// If this returns false, then the clock is probably not
+			// giving you the correct time.
+			// The OSF is cleared by function setSecond();.
+
+	private:
+
+		byte decToBcd(byte val); 
+			// Convert normal decimal numbers to binary coded decimal
+		byte bcdToDec(byte val); 
+			// Convert binary coded decimal to normal decimal numbers
+		byte readControlByte(bool which); 
+			// Read selected control byte: (0); reads 0x0e, (1) reads 0x0f
+		void writeControlByte(byte control, bool which); 
+			// Write the selected control byte. 
+			// which == false -> 0x0e, true->0x0f.
+
+};
+
+#endif

esp8266_deauther/src/DS3231-1.0.3/LICENSE

@@ -0,0 +1,24 @@
+This is free and unencumbered software released into the public domain.
+
+Anyone is free to copy, modify, publish, use, compile, sell, or
+distribute this software, either in source code form or as a compiled
+binary, for any purpose, commercial or non-commercial, and by any
+means.
+
+In jurisdictions that recognize copyright laws, the author or authors
+of this software dedicate any and all copyright interest in the
+software to the public domain. We make this dedication for the benefit
+of the public at large and to the detriment of our heirs and
+successors. We intend this dedication to be an overt act of
+relinquishment in perpetuity of all present and future rights to this
+software under copyright law.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.
+
+For more information, please refer to <http://unlicense.org/>

esp8266_deauther/src/SimpleButton/Buttons/AnalogStick.cpp

@@ -0,0 +1,139 @@
+#include "AnalogStick.h"
+
+namespace simplebutton {
+    AnalogStick::AnalogStick() {
+        setup(255, 255, 255);
+    }
+
+    AnalogStick::AnalogStick(uint8_t xPin, uint8_t yPin, uint8_t buttonPin) {
+        setup(xPin, yPin, buttonPin);
+    }
+
+    AnalogStick::~AnalogStick() {
+        if (this->up) delete this->up;
+        if (this->down) delete this->down;
+        if (this->left) delete this->left;
+        if (this->right) delete this->right;
+    }
+
+    void AnalogStick::setup(uint8_t xPin, uint8_t yPin, uint8_t buttonPin) {
+        this->xPin      = xPin;
+        this->yPin      = yPin;
+        this->buttonPin = buttonPin;
+
+        if (xPin < 255) pinMode(xPin, INPUT);
+        if (yPin < 255) pinMode(yPin, INPUT);
+        if (buttonPin < 255) pinMode(buttonPin, INPUT);
+
+        this->button = new ButtonPullup(buttonPin);
+        this->up     = new ButtonAnalog(yPin);
+        this->down   = new ButtonAnalog(yPin);
+        this->left   = new ButtonAnalog(xPin);
+        this->right  = new ButtonAnalog(xPin);
+
+        setLogic(1024);
+    }
+
+    void AnalogStick::update() {
+        button->update();
+        up->update();
+        down->update();
+        left->update();
+        right->update();
+
+        this->xValue = left->getState();
+        this->yValue = up->getState();
+    }
+
+    void AnalogStick::update(uint8_t xValue, uint8_t yValue, bool buttonPress) {
+        this->xValue = xValue;
+        this->yValue = yValue;
+
+        button->update(buttonPress);
+        up->update(yValue);
+        down->update(yValue);
+        left->update(xValue);
+        right->update(xValue);
+    }
+
+    uint8_t AnalogStick::getX() {
+        return xValue;
+    }
+
+    uint8_t AnalogStick::getY() {
+        return yValue;
+    }
+
+    void AnalogStick::setButtons(ButtonAnalog* up, ButtonAnalog* down, ButtonAnalog* left, ButtonAnalog* right,
+                                 Button* button) {
+        if (this->up) delete this->up;
+        if (this->down) delete this->down;
+        if (this->left) delete this->left;
+        if (this->right) delete this->right;
+
+        this->up    = up ? up : new ButtonAnalog();
+        this->down  = down ? down : new ButtonAnalog();
+        this->left  = left ? left : new ButtonAnalog();
+        this->right = right ? right : new ButtonAnalog();
+
+        this->button = button ? button : new Button();
+
+        setLogic(this->logic, this->tolerance);
+    }
+
+    void AnalogStick::setLogic(uint16_t logic) {
+        setLogic(logic, tolerance);
+    }
+
+    void AnalogStick::setLogic(uint16_t logic, uint8_t tolerance) {
+        this->logic     = logic;
+        this->tolerance = tolerance;
+
+        uint16_t difference = (double)logic * ((double)tolerance / double(100));
+
+        up->setBounds(0, difference);
+        down->setBounds(logic - difference, logic);
+        left->setBounds(0, difference);
+        right->setBounds(logic - difference, logic);
+    }
+
+    void AnalogStick::setUpdateInterval(uint32_t updateInterval) {
+        button->setUpdateInterval(updateInterval);
+        up->setUpdateInterval(updateInterval);
+        down->setUpdateInterval(updateInterval);
+        left->setUpdateInterval(updateInterval);
+        right->setUpdateInterval(updateInterval);
+    }
+
+    void AnalogStick::setDefaultMinPushTime(uint32_t defaultMinPushTime) {
+        button->setDefaultMinPushTime(defaultMinPushTime);
+        up->setDefaultMinPushTime(defaultMinPushTime);
+        down->setDefaultMinPushTime(defaultMinPushTime);
+        left->setDefaultMinPushTime(defaultMinPushTime);
+        right->setDefaultMinPushTime(defaultMinPushTime);
+    }
+
+    void AnalogStick::setDefaultMinReleaseTime(uint32_t defaultMinReleaseTime) {
+        button->setDefaultMinReleaseTime(defaultMinReleaseTime);
+        up->setDefaultMinReleaseTime(defaultMinReleaseTime);
+        down->setDefaultMinReleaseTime(defaultMinReleaseTime);
+        left->setDefaultMinReleaseTime(defaultMinReleaseTime);
+        right->setDefaultMinReleaseTime(defaultMinReleaseTime);
+    }
+
+    void AnalogStick::setDefaultTimeSpan(uint32_t defaultTimeSpan) {
+        button->setDefaultTimeSpan(defaultTimeSpan);
+        up->setDefaultTimeSpan(defaultTimeSpan);
+        down->setDefaultTimeSpan(defaultTimeSpan);
+        left->setDefaultTimeSpan(defaultTimeSpan);
+        right->setDefaultTimeSpan(defaultTimeSpan);
+    }
+
+    void AnalogStick::setDefaultHoldTime(uint32_t defaultHoldInterval) {
+        button->setDefaultHoldTime(defaultHoldInterval);
+        up->setDefaultHoldTime(defaultHoldInterval);
+        down->setDefaultHoldTime(defaultHoldInterval);
+        left->setDefaultHoldTime(defaultHoldInterval);
+        right->setDefaultHoldTime(defaultHoldInterval);
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/AnalogStick.h

@@ -0,0 +1,53 @@
+#ifndef SimpleButton_AnalogStick_h
+#define SimpleButton_AnalogStick_h
+
+#include "ButtonPullup.h"
+#include "ButtonAnalog.h"
+
+namespace simplebutton {
+    class AnalogStick {
+        public:
+            Button* button      = NULL;
+            ButtonAnalog* up    = NULL;
+            ButtonAnalog* down  = NULL;
+            ButtonAnalog* left  = NULL;
+            ButtonAnalog* right = NULL;
+
+            AnalogStick();
+            AnalogStick(uint8_t xPin, uint8_t yPin, uint8_t buttonPin);
+
+            ~AnalogStick();
+
+            void setup(uint8_t xPin, uint8_t yPin, uint8_t buttonPin);
+
+            void update();
+            void update(uint8_t xValue, uint8_t yValue, bool buttonPress);
+
+            uint8_t getX();
+            uint8_t getY();
+
+            void setButtons(ButtonAnalog* up, ButtonAnalog* down, ButtonAnalog* left, ButtonAnalog* right,
+                            Button* button);
+            void setLogic(uint16_t logic);
+            void setLogic(uint16_t logic, uint8_t tolerance);
+
+            void setUpdateInterval(uint32_t updateInterval);
+            void setDefaultMinPushTime(uint32_t defaultMinPushTime);
+            void setDefaultMinReleaseTime(uint32_t defaultMinReleaseTime);
+            void setDefaultTimeSpan(uint32_t defaultTimeSpan);
+            void setDefaultHoldTime(uint32_t defaultHoldInterval);
+
+        private:
+            uint16_t logic    = 1024;
+            uint8_t tolerance = 25; // percentage
+
+            uint8_t xValue = 0;
+            uint8_t yValue = 0;
+
+            uint8_t xPin      = 0;
+            uint8_t yPin      = 0;
+            uint8_t buttonPin = 0;
+    };
+}
+
+#endif // ifndef SimpleButton_AnalogStick_h

esp8266_deauther/src/SimpleButton/Buttons/Button.cpp

@@ -0,0 +1,319 @@
+#include "../SimpleButton.h"
+
+namespace simplebutton {
+    Button::Button() {
+        setup(255, false);
+    }
+
+    Button::Button(uint8_t pin) {
+        setup(pin, false);
+    }
+
+    Button::Button(uint8_t pin, bool inverted) {
+        setup(pin, inverted);
+    }
+
+    Button::~Button() {}
+
+    void Button::setup(uint8_t pin, bool inverted) {
+        this->button_pin      = pin;
+        this->button_inverted = inverted;
+        enable();
+    }
+
+    void Button::enable() {
+        button_enabled = true;
+
+        if ((button_pin < 255) && !button_setup) {
+            pinMode(button_pin, INPUT);
+            button_setup = true;
+        }
+    }
+
+    void Button::disable() {
+        button_enabled = false;
+    }
+
+    void Button::reset() {
+        pushedFlag   = false;
+        releasedFlag = false;
+        holdFlag     = false;
+    }
+
+    void Button::push() {
+        if (!state) {
+            state = true;
+
+            prevPushTime    = pushTime;
+            prevReleaseTime = releaseTime;
+            pushedFlag      = true;
+
+            pushTime = millis();
+            holdTime = millis();
+            holdFlag = false;
+        }
+    }
+
+    void Button::release() {
+        if (state) {
+            state        = false;
+            releasedFlag = true;
+            releaseTime  = millis();
+        }
+    }
+
+    void Button::click() {
+        click(defaultMinPushTime);
+    }
+
+    void Button::click(uint32_t time) {
+        push();
+        pushTime = millis() - time - defaultMinReleaseTime;
+        release();
+        releaseTime = millis() - defaultMinReleaseTime;
+
+        updateEvents();
+    }
+
+    int Button::read() {
+        bool currentState = false;
+
+        if (button_enabled && button_setup) {
+            currentState = digitalRead(button_pin);
+
+            if (button_inverted) currentState = !currentState;
+        }
+
+        return (int)currentState;
+    }
+
+    void Button::update() {
+        if (millis() - updateTime >= updateInterval) {
+            updateEvents();
+            if (button_enabled && button_setup) update(read());
+        }
+    }
+
+    void Button::update(int state) {
+        // update time
+        updateTime = millis();
+
+        // check events
+        updateEvents();
+
+        // update state
+        if (state > 0) push();
+        else release();
+    }
+
+    void Button::updateEvents() {
+        Event* e = this->events;
+
+        while (e != NULL) {
+            switch (e->getMode()) {
+                case e->MODE::PUSHED:
+                    if (this->pushed()) e->run();
+                    break;
+
+                case e->MODE::RELEASED:
+                    if (this->released()) e->run();
+                    break;
+
+                case e->MODE::CLICKED:
+                    if (this->clicked(e->getMinPushTime(), e->getMinReleaseTime())) e->run();
+                    break;
+
+                case e->MODE::DOUBLECLICKED:
+                    if (this->doubleClicked(e->getMinPushTime(), e->getMinReleaseTime(), e->getTimeSpan())) e->run();
+                    break;
+
+                case e->MODE::HOLDING:
+                    if (this->holding(e->getInterval())) e->run();
+                    break;
+            }
+            e = e->next;
+        }
+    }
+
+    bool Button::isInverted() {
+        return button_inverted;
+    }
+
+    bool Button::isEnabled() {
+        return button_enabled;
+    }
+
+    bool Button::isSetup() {
+        return button_setup;
+    }
+
+    bool Button::getState() {
+        return state;
+    }
+
+    int Button::getClicks() {
+        return (int)clicks;
+    }
+
+    int Button::getPushTime() {
+        return (int)(millis() - pushTime);
+    }
+
+    bool Button::pushed() {
+        if (pushedFlag) {
+            pushedFlag = false;
+            return true;
+        }
+        return false;
+    }
+
+    bool Button::released() {
+        if (releasedFlag && (pushTime < releaseTime)) {
+            releasedFlag = false;
+            return true;
+        }
+        return false;
+    }
+
+    bool Button::clicked() {
+        return clicked(defaultMinPushTime);
+    }
+
+    bool Button::clicked(uint32_t minPushTime) {
+        return clicked(minPushTime, defaultMinReleaseTime);
+    }
+
+    bool Button::clicked(uint32_t minPushTime, uint32_t minReleaseTime) {
+        bool notHolding     = !holdFlag;
+        bool minTime        = millis() - pushTime >= minPushTime;
+        bool releaseTimeout = millis() - releaseTime >= minReleaseTime;
+
+        if (notHolding && minTime && releaseTimeout) {
+            if (released()) {
+                clicks++;
+                return true;
+            }
+        }
+
+        return false;
+    }
+
+    bool Button::doubleClicked() {
+        return doubleClicked(defaultMinPushTime);
+    }
+
+    bool Button::doubleClicked(uint32_t minPushTime) {
+        return doubleClicked(minPushTime, defaultTimeSpan);
+    }
+
+    bool Button::doubleClicked(uint32_t minPushTime, uint32_t timeSpan) {
+        return doubleClicked(minPushTime, defaultMinReleaseTime, timeSpan);
+    }
+
+    bool Button::doubleClicked(uint32_t minPushTime, uint32_t minReleaseTime, uint32_t timeSpan) {
+        bool wasPrevClicked = prevReleaseTime - prevPushTime >= minPushTime;
+        bool inTimeSpan     = millis() - prevPushTime <= timeSpan;
+        bool releaseTimeout = millis() - prevReleaseTime >= minReleaseTime;
+
+        if (wasPrevClicked && inTimeSpan && releaseTimeout) {
+            if (clicked(minPushTime)) {
+                pushTime = 0;
+                return true;
+            }
+        }
+
+        return false;
+    }
+
+    bool Button::holding() {
+        return holding(defaultHoldInterval);
+    }
+
+    bool Button::holding(uint32_t interval) {
+        if (getState() && (millis() - holdTime >= interval)) {
+            holdTime = millis();
+            holdFlag = true;
+            return true;
+        }
+        return false;
+    }
+
+    void Button::setUpdateInterval(uint32_t updateInterval) {
+        this->updateInterval = updateInterval;
+    }
+
+    void Button::setDefaultMinPushTime(uint32_t defaultMinPushTime) {
+        this->defaultMinPushTime = defaultMinPushTime;
+    }
+
+    void Button::setDefaultMinReleaseTime(uint32_t defaultMinReleaseTime) {
+        this->defaultMinReleaseTime = defaultMinReleaseTime;
+    }
+
+    void Button::setDefaultTimeSpan(uint32_t defaultTimeSpan) {
+        this->defaultTimeSpan = defaultTimeSpan;
+    }
+
+    void Button::setDefaultHoldTime(uint32_t defaultHoldInterval) {
+        this->defaultHoldInterval = defaultHoldInterval;
+    }
+
+    void Button::setOnPushed(ButtonEventFunction) {
+        this->addEvent(new PushEvent(fnct));
+    }
+
+    void Button::setOnReleased(ButtonEventFunction) {
+        this->addEvent(new ReleaseEvent(fnct));
+    }
+
+    void Button::setOnClicked(ButtonEventFunction) {
+        setOnClicked(fnct, defaultMinPushTime, defaultMinReleaseTime);
+    }
+
+    void Button::setOnClicked(ButtonEventFunction, uint32_t minPushTime) {
+        setOnClicked(fnct, minPushTime, defaultMinReleaseTime);
+    }
+
+    void Button::setOnClicked(ButtonEventFunction, uint32_t minPushTime, uint32_t minReleaseTime) {
+        this->addEvent(new ClickEvent(fnct, minPushTime, minReleaseTime));
+    }
+
+    void Button::setOnDoubleClicked(ButtonEventFunction) {
+        setOnDoubleClicked(fnct, defaultMinPushTime, defaultMinReleaseTime, defaultTimeSpan);
+    }
+
+    void Button::setOnDoubleClicked(ButtonEventFunction, uint32_t minPushTime) {
+        setOnDoubleClicked(fnct, minPushTime, defaultMinReleaseTime, defaultTimeSpan);
+    }
+
+    void Button::setOnDoubleClicked(ButtonEventFunction, uint32_t minPushTime, uint32_t timeSpan) {
+        setOnDoubleClicked(fnct, minPushTime, defaultMinReleaseTime, timeSpan);
+    }
+
+    void Button::setOnDoubleClicked(ButtonEventFunction, uint32_t minPushTime, uint32_t minReleaseTime, uint32_t timeSpan) {
+        this->addEvent(new DoubleclickEvent(fnct, minPushTime, minReleaseTime, timeSpan));
+    }
+
+    void Button::setOnHolding(ButtonEventFunction) {
+        setOnHolding(fnct, defaultHoldInterval);
+    }
+
+    void Button::setOnHolding(ButtonEventFunction, uint32_t interval) {
+        this->addEvent(new HoldEvent(fnct, interval));
+    }
+
+    void Button::clearEvents() {
+        delete events;
+        events = NULL;
+    }
+
+    void Button::addEvent(Event* e) {
+        if (events == NULL) events = e;
+        else {
+            Event* tmp = events;
+
+            while (tmp->next != NULL) tmp = tmp->next;
+            tmp->next = e;
+        }
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/Button.h

@@ -0,0 +1,111 @@
+#ifndef SimpleButton_Button_h
+#define SimpleButton_Button_h
+
+#include "Arduino.h"
+#include "../Events/Event.h"
+#include "../Events/PushEvent.h"
+#include "../Events/ReleaseEvent.h"
+#include "../Events/ClickEvent.h"
+#include "../Events/DoubleclickEvent.h"
+#include "../Events/HoldEvent.h"
+
+namespace simplebutton {
+    class Button {
+        public:
+            Button();
+            Button(uint8_t pin);
+            Button(uint8_t pin, bool inverted);
+
+            virtual ~Button();
+
+            void setup(uint8_t pin, bool inverted);
+
+            virtual void enable();
+            virtual void disable();
+            virtual void reset();
+
+            virtual void push();
+            virtual void release();
+
+            virtual void click();
+            virtual void click(uint32_t time);
+
+            virtual int read();
+            virtual void update();
+            virtual void update(int state);
+            virtual void updateEvents();
+
+            virtual bool isInverted();
+            virtual bool isEnabled();
+            virtual bool isSetup();
+
+            virtual bool getState();
+            virtual int getClicks();
+            virtual int getPushTime();
+
+            virtual bool pushed();
+            virtual bool released();
+            virtual bool clicked();
+            virtual bool clicked(uint32_t minPushTime);
+            virtual bool clicked(uint32_t minPushTime, uint32_t minReleaseTime);
+            virtual bool doubleClicked();
+            virtual bool doubleClicked(uint32_t minPushTime);
+            virtual bool doubleClicked(uint32_t minPushTime, uint32_t timeSpan);
+            virtual bool doubleClicked(uint32_t minPushTime, uint32_t minReleaseTime, uint32_t timeSpan);
+            virtual bool holding();
+            virtual bool holding(uint32_t interval);
+
+            virtual void setUpdateInterval(uint32_t updateInterval);
+            virtual void setDefaultMinPushTime(uint32_t defaultMinPushTime);
+            virtual void setDefaultMinReleaseTime(uint32_t defaultMinReleaseTime);
+            virtual void setDefaultTimeSpan(uint32_t defaultTimeSpan);
+            virtual void setDefaultHoldTime(uint32_t defaultHoldInterval);
+
+            virtual void setOnPushed(ButtonEventFunction);
+            virtual void setOnReleased(ButtonEventFunction);
+            virtual void setOnClicked(ButtonEventFunction);
+            virtual void setOnClicked(ButtonEventFunction, uint32_t minPushTime);
+            virtual void setOnClicked(ButtonEventFunction, uint32_t minPushTime, uint32_t minReleaseTime);
+            virtual void setOnDoubleClicked(ButtonEventFunction);
+            virtual void setOnDoubleClicked(ButtonEventFunction, uint32_t minPushTime);
+            virtual void setOnDoubleClicked(ButtonEventFunction, uint32_t minPushTime, uint32_t timeSpan);
+            virtual void setOnDoubleClicked(
+                ButtonEventFunction, uint32_t minPushTime, uint32_t minReleaseTime, uint32_t timeSpan);
+            virtual void setOnHolding(ButtonEventFunction);
+            virtual void setOnHolding(ButtonEventFunction, uint32_t interval);
+
+            virtual void clearEvents();
+
+        protected:
+            Event* events = NULL;
+
+            bool button_inverted = false;
+            bool button_setup    = false;
+            bool button_enabled  = false;
+            bool state           = false;
+            bool pushedFlag      = false;
+            bool releasedFlag    = false;
+            bool holdFlag        = false;
+
+            uint8_t button_pin = 255;
+
+            uint16_t clicks = 0;
+
+            uint32_t pushTime        = 0;
+            uint32_t releaseTime     = 0;
+            uint32_t prevPushTime    = 0;
+            uint32_t prevReleaseTime = 0;
+            uint32_t holdTime        = 0;
+            uint32_t updateTime      = 0;
+
+            uint32_t updateInterval        = 5;
+            uint32_t defaultMinPushTime    = 40;
+            uint32_t defaultMinReleaseTime = 40;
+            uint32_t defaultTimeSpan       = 500;
+            uint32_t defaultHoldInterval   = 500;
+
+            void addEvent(Event* e);
+    };
+}
+
+#endif // ifndef SimpleButton_Button_h

esp8266_deauther/src/SimpleButton/Buttons/ButtonAnalog.cpp

@@ -0,0 +1,77 @@
+#include "ButtonAnalog.h"
+
+namespace simplebutton {
+    ButtonAnalog::ButtonAnalog() {
+        setup(255, 0, 1024);
+    }
+
+    ButtonAnalog::ButtonAnalog(uint8_t pin) {
+        setup(pin, 0, 1024);
+    }
+
+    ButtonAnalog::ButtonAnalog(uint16_t minValue, uint16_t maxValue) {
+        setup(255, minValue, maxValue);
+    }
+
+    ButtonAnalog::ButtonAnalog(uint8_t pin, uint16_t minValue, uint16_t maxValue) {
+        setup(pin, minValue, maxValue);
+    }
+
+    ButtonAnalog::~ButtonAnalog() {}
+
+    void ButtonAnalog::setup(uint8_t pin, uint16_t minValue, uint16_t maxValue) {
+        this->button_pin = pin;
+        this->minValue   = minValue;
+        this->maxValue   = maxValue;
+        enable();
+    }
+
+    int ButtonAnalog::read() {
+        int currentState = 0;
+
+        if (button_enabled && button_setup) {
+            currentState = analogRead(button_pin);
+        }
+
+        return currentState;
+    }
+
+    void ButtonAnalog::update() {
+        if (millis() - updateTime >= updateInterval) {
+            Button::updateEvents();
+            if (button_enabled && button_setup) update(read());
+        }
+    }
+
+    void ButtonAnalog::update(int state) {
+        uint16_t newState = state;
+
+        updateTime = millis();
+
+        value = newState;
+
+        if ((newState >= minValue) && (newState <= maxValue)) push();
+        else release();
+    }
+
+    void ButtonAnalog::setMin(uint16_t minValue) {
+        this->minValue = minValue;
+    }
+
+    void ButtonAnalog::setMax(uint16_t maxValue) {
+        this->maxValue = maxValue;
+    }
+
+    void ButtonAnalog::setBounds(uint16_t minValue, uint16_t maxValue) {
+        setMin(minValue);
+        setMax(maxValue);
+    }
+
+    void ButtonAnalog::setValue(int value) {
+        this->value = (uint16_t)value;
+    }
+
+    uint16_t ButtonAnalog::getValue() {
+        return value;
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/ButtonAnalog.h

@@ -0,0 +1,37 @@
+#ifndef SimpleButton_ButtonAnalog_h
+#define SimpleButton_ButtonAnalog_h
+
+#include "Button.h"
+
+
+namespace simplebutton {
+    class ButtonAnalog : public Button {
+        public:
+            ButtonAnalog();
+            ButtonAnalog(uint8_t pin);
+            ButtonAnalog(uint16_t minValue, uint16_t maxValue);
+            ButtonAnalog(uint8_t pin, uint16_t minValue, uint16_t maxValue);
+
+            ~ButtonAnalog();
+
+            void setup(uint8_t pin, uint16_t minValue, uint16_t maxValue);
+
+            int read();
+
+            void update();
+            void update(int state);
+
+            void setMin(uint16_t minValue);
+            void setMax(uint16_t maxValue);
+            void setBounds(uint16_t minValue, uint16_t maxValue);
+
+            uint16_t getValue();
+            void setValue(int value);
+
+        private:
+            uint16_t minValue = 0;
+            uint16_t maxValue = 1024;
+            uint16_t value    = 0;
+    };
+}
+#endif // ifndef SimpleButton_ButtonAnalog_h

esp8266_deauther/src/SimpleButton/Buttons/ButtonGPIOExpander.cpp

@@ -0,0 +1,55 @@
+#include "ButtonGPIOExpander.h"
+
+namespace simplebutton {
+    ButtonGPIOExpander::ButtonGPIOExpander() {
+        setup(NULL, 255, false);
+    }
+
+    ButtonGPIOExpander::ButtonGPIOExpander(GPIOExpander* pcf, uint8_t pin) {
+        setup(pcf, pin, false);
+    }
+
+    ButtonGPIOExpander::ButtonGPIOExpander(GPIOExpander* pcf, uint8_t pin, bool inverted) {
+        setup(pcf, pin, inverted);
+    }
+
+    ButtonGPIOExpander::~ButtonGPIOExpander() {}
+
+    void ButtonGPIOExpander::setup(GPIOExpander* pcf, uint8_t pin, bool inverted) {
+        this->pcf             = pcf;
+        this->button_pin      = pin;
+        this->button_inverted = inverted;
+        enable();
+    }
+
+    void ButtonGPIOExpander::enable() {
+        button_enabled = true;
+
+        if (pcf) {
+            pcf->write(button_pin, 0);
+            if (pcf->connected()) button_setup = true;
+        }
+    }
+
+    int ButtonGPIOExpander::read() {
+        bool currentState = false;
+
+        if (button_enabled && button_setup) {
+            currentState = pcf->read(button_pin) > 0;
+
+            if (button_inverted) currentState = !currentState;
+        }
+
+        return (int)currentState;
+    }
+
+    void ButtonGPIOExpander::update() {
+        if (button_enabled && button_setup) {
+            update(read());
+        }
+    }
+
+    void ButtonGPIOExpander::update(int state) {
+        Button::update(state);
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/ButtonGPIOExpander.h

@@ -0,0 +1,32 @@
+#ifndef SimpleButton_ButtonGPIOExpander_h
+#define SimpleButton_ButtonGPIOExpander_h
+
+#include "Button.h"
+#include "../libs/GPIOExpander.h"
+#include "../libs/PCF8574.h"
+#include "../libs/PCF8575.h"
+#include "../libs/MCP23017.h"
+
+namespace simplebutton {
+    class ButtonGPIOExpander : public Button {
+        public:
+            ButtonGPIOExpander();
+            ButtonGPIOExpander(GPIOExpander* pcf, uint8_t pin);
+            ButtonGPIOExpander(GPIOExpander* pcf, uint8_t pin, bool inverted);
+
+            virtual ~ButtonGPIOExpander();
+
+            void setup(GPIOExpander* pcf, uint8_t pin, bool inverted);
+
+            virtual void enable();
+
+            virtual int read();
+            virtual void update();
+            virtual void update(int state);
+
+        protected:
+            GPIOExpander* pcf = NULL;
+    };
+}
+
+#endif // ifndef SimpleButton_ButtonGPIOExpander_h

esp8266_deauther/src/SimpleButton/Buttons/ButtonPullup.cpp

@@ -0,0 +1,28 @@
+#include "ButtonPullup.h"
+
+namespace simplebutton {
+    ButtonPullup::ButtonPullup() {
+        setup(255);
+    }
+
+    ButtonPullup::ButtonPullup(uint8_t pin) {
+        setup(pin);
+    }
+
+    ButtonPullup::~ButtonPullup() {}
+
+    void ButtonPullup::setup(uint8_t pin) {
+        this->button_pin      = pin;
+        this->button_inverted = true;
+        enable();
+    }
+
+    void ButtonPullup::enable() {
+        button_enabled = true;
+
+        if ((button_pin < 255) && !button_setup) {
+            pinMode(button_pin, INPUT_PULLUP);
+            button_setup = true;
+        }
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/ButtonPullup.h

@@ -0,0 +1,20 @@
+#ifndef SimpleButton_ButtonPullup_h
+#define SimpleButton_ButtonPullup_h
+
+#include "Button.h"
+
+namespace simplebutton {
+    class ButtonPullup : public Button {
+        public:
+            ButtonPullup();
+            ButtonPullup(uint8_t pin);
+
+            ~ButtonPullup();
+
+            void setup(uint8_t pin);
+
+            void enable();
+    };
+}
+
+#endif // ifndef SimpleButton_ButtonPullup_h

esp8266_deauther/src/SimpleButton/Buttons/ButtonPullupGPIOExpander.cpp

@@ -0,0 +1,29 @@
+#include "ButtonPullupGPIOExpander.h"
+
+namespace simplebutton {
+    ButtonPullupGPIOExpander::ButtonPullupGPIOExpander() {
+        setup(NULL, 255);
+    }
+
+    ButtonPullupGPIOExpander::ButtonPullupGPIOExpander(GPIOExpander* pcf, uint8_t pin) {
+        setup(pcf, pin);
+    }
+
+    ButtonPullupGPIOExpander::~ButtonPullupGPIOExpander() {}
+
+    void ButtonPullupGPIOExpander::setup(GPIOExpander* pcf, uint8_t pin) {
+        this->pcf             = pcf;
+        this->button_pin      = pin;
+        this->button_inverted = true;
+        enable();
+    }
+
+    void ButtonPullupGPIOExpander::enable() {
+        button_enabled = true;
+
+        if (pcf) {
+            pcf->write(button_pin, 1);
+            if (pcf->connected()) button_setup = true;
+        }
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/ButtonPullupGPIOExpander.h

@@ -0,0 +1,20 @@
+#ifndef SimpleButton_ButtonPullupGPIOExpander_h
+#define SimpleButton_ButtonPullupGPIOExpander_h
+
+#include "ButtonGPIOExpander.h"
+
+namespace simplebutton {
+    class ButtonPullupGPIOExpander : public ButtonGPIOExpander {
+        public:
+            ButtonPullupGPIOExpander();
+            ButtonPullupGPIOExpander(GPIOExpander* pcf, uint8_t pin);
+
+            ~ButtonPullupGPIOExpander();
+
+            void setup(GPIOExpander* pcf, uint8_t pin);
+
+            void enable();
+    };
+}
+
+#endif // ifndef SimpleButton_ButtonPullupGPIOExpander_h

esp8266_deauther/src/SimpleButton/Buttons/PS2Gamepad.cpp

@@ -0,0 +1,400 @@
+#include "PS2Gamepad.h"
+
+namespace simplebutton {
+  #include "PS2Gamepad.h"
+
+    PS2Gamepad::PS2Gamepad() {}
+
+    PS2Gamepad::PS2Gamepad(uint8_t clockPin, uint8_t cmdPin, uint8_t attPin, uint8_t dataPin, bool analog) {
+        setup(clockPin, cmdPin, attPin, dataPin, analog);
+    }
+
+    PS2Gamepad::~PS2Gamepad() {
+        if (up) delete up;
+        if (down) delete down;
+        if (left) delete left;
+        if (right) delete right;
+
+        if (l1) delete l1;
+        if (l2) delete l2;
+        if (r1) delete r1;
+        if (r2) delete r2;
+
+        if (square) delete square;
+        if (triangle) delete triangle;
+        if (cross) delete cross;
+        if (circle) delete circle;
+
+        if (select) delete select;
+        if (start) delete start;
+
+        if (analogLeft) delete analogLeft;
+        if (analogRight) delete analogRight;
+    }
+
+    void PS2Gamepad::setup(uint8_t clockPin, uint8_t cmdPin, uint8_t attPin, uint8_t dataPin, bool analog) {
+        // pin setup
+        this->clockPin        = clockPin;
+        this->cmdPin          = cmdPin;
+        this->attPin          = attPin;
+        this->dataPin         = dataPin;
+        this->rumbleEnabled   = analog;
+        this->pressureEnabled = analog;
+
+        pinMode(clockPin, OUTPUT);
+        pinMode(attPin,   OUTPUT);
+        pinMode(cmdPin,   OUTPUT);
+
+        pinMode(dataPin,  INPUT_PULLUP);
+
+        digitalWrite(cmdPin, HIGH);
+        digitalWrite(clockPin, HIGH);
+
+        // button setup
+        if (!up) up = new ButtonAnalog(1, 255);
+        if (!down) down = new ButtonAnalog(1, 255);
+        if (!left) left = new ButtonAnalog(1, 255);
+        if (!right) right = new ButtonAnalog(1, 255);
+
+        if (!l1) l1 = new ButtonAnalog(1, 255);
+        if (!l2) l2 = new ButtonAnalog(1, 255);
+        if (!r1) r1 = new ButtonAnalog(1, 255);
+        if (!r2) r2 = new ButtonAnalog(1, 255);
+
+        if (!square) square = new ButtonAnalog(1, 255);
+        if (!triangle) triangle = new ButtonAnalog(1, 255);
+        if (!cross) cross = new ButtonAnalog(1, 255);
+        if (!circle) circle = new ButtonAnalog(1, 255);
+
+        if (!select) select = new Button();
+        if (!start) start = new Button();
+
+        if (!analogLeft) {
+            analogLeft = new AnalogStick();
+            analogLeft->setLogic(256);
+        }
+        if (!analogRight) {
+            analogRight = new AnalogStick();
+            analogRight->setLogic(256);
+        }
+
+        // connection setup
+        poll();
+        delay(10);
+        poll();
+        delay(10);
+        poll();
+
+        /*
+           if ((gamepadData[1] != 0x41) && (gamepadData[1] != 0x73) && (gamepadData[1] != 0x79)) {
+           errorCode = 1;
+           return;
+           }
+         */
+
+        int  tries   = 0;
+        bool success = false;
+
+        do {
+            sendEnter();
+
+            delayMicroseconds(5);
+
+            digitalWrite(cmdPin, HIGH);
+            digitalWrite(clockPin, HIGH);
+            digitalWrite(attPin, LOW); // enable joystick
+
+            delayMicroseconds(5);
+
+            sendRead();
+
+            digitalWrite(attPin, HIGH); // disable joystick
+
+            sendMode();
+            if (rumbleEnabled) sendRumble();
+            if (pressureEnabled) sendBytesLarge();
+            sendExit();
+
+            poll();
+
+            if ((gamepadData[1] == 0x79) || (gamepadData[1] == 0x73)) {
+                success = true;
+            } else {
+                tries++;
+            }
+        } while (tries < 10 && !success);
+
+        if (!success) {
+            errorCode = 2;
+        } else {
+            is_connected = true;
+        }
+    }
+
+    void PS2Gamepad::update() {
+        if (is_connected && (millis() - lastPoll > updateInterval)) {
+            poll();
+
+            up->update(getDigitalValue(4));
+            down->update(getDigitalValue(6));
+            left->update(getDigitalValue(7));
+            right->update(getDigitalValue(5));
+
+            l1->update(getDigitalValue(10));
+            l2->update(getDigitalValue(8));
+            r1->update(getDigitalValue(11));
+            r2->update(getDigitalValue(9));
+
+            square->update(getDigitalValue(15));
+            triangle->update(getDigitalValue(12));
+            cross->update(getDigitalValue(14));
+            circle->update(getDigitalValue(13));
+
+            select->update(getDigitalValue(0));
+            start->update(getDigitalValue(3));
+
+            analogLeft->update(getAnalogValue(7), getAnalogValue(8), getDigitalValue(1));
+            analogRight->update(getAnalogValue(5), getAnalogValue(6), getDigitalValue(2));
+
+            if (pressureEnabled) {
+                up->setValue(getDigitalValue(4) | getAnalogValue(11));
+                down->setValue(getDigitalValue(6) | getAnalogValue(12));
+                left->setValue(getDigitalValue(7) | getAnalogValue(10));
+                right->setValue(getDigitalValue(5) | getAnalogValue(9));
+
+                l1->setValue(getDigitalValue(10) | getAnalogValue(17));
+                l2->setValue(getDigitalValue(8) | getAnalogValue(19));
+                r1->setValue(getDigitalValue(11) | getAnalogValue(18));
+                r2->setValue(getDigitalValue(9) | getAnalogValue(20));
+
+                square->setValue(getDigitalValue(15) | getAnalogValue(16));
+                triangle->setValue(getDigitalValue(12) | getAnalogValue(13));
+                cross->setValue(getDigitalValue(14) | getAnalogValue(15));
+                circle->setValue(getDigitalValue(13) | getAnalogValue(14));
+            }
+        }
+    }
+
+    String PS2Gamepad::getError() {
+        String msg;
+
+        switch (errorCode) {
+        case 0:
+            msg += String("OK");
+            break;
+
+        case 1:
+            msg += String("Mode not matched or not found [");
+            msg += String(gamepadData[1], HEX);
+            msg += String("]");
+            break;
+
+        case 2:
+            msg += String("Not accepting commands [");
+            msg += String(gamepadData[1], HEX);
+            msg += String("]");
+            break;
+        }
+
+        errorCode = 0;
+
+        return msg;
+    }
+
+    bool PS2Gamepad::connected() {
+        return is_connected;
+    }
+
+    void PS2Gamepad::setUpdateInterval(uint32_t updateInterval) {
+        this->updateInterval = updateInterval;
+    }
+
+    void PS2Gamepad::setMotors(uint8_t motorA, uint8_t motorB) {
+        if (!rumbleEnabled) {
+            rumbleEnabled   = true;
+            pressureEnabled = true;
+            reconfig();
+        }
+        poll(motorA, motorB);
+    }
+
+    void PS2Gamepad::reconfig() {
+        sendEnter();
+        sendMode();
+        if (rumbleEnabled) sendRumble();
+        if (pressureEnabled) sendBytesLarge();
+        sendExit();
+    }
+
+    void PS2Gamepad::poll() {
+        if (millis() - lastPoll > 1500) reconfig();
+        lastPoll = millis();
+
+        uint8_t dwordA[9]  = { 0x01, 0x42, 0x00, motorA, motorB, 0x00, 0x00, 0x00, 0x00 };
+        uint8_t dwordB[12] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+        int  tries   = 0;
+        bool success = false;
+
+        do {
+            digitalWrite(cmdPin, HIGH);
+            digitalWrite(clockPin, HIGH);
+            digitalWrite(attPin, LOW); // low enable joystick
+
+            delayMicroseconds(5);
+
+            // send command to ask for data
+            for (int i = 0; i < 9; i++) {
+                gamepadData[i] = shift(dwordA[i]);
+            }
+
+            // if controller is in full data return mode, get the rest of data
+            if (gamepadData[1] == 0x79) {
+                for (int i = 0; i < 12; i++) {
+                    gamepadData[i + 9] = shift(dwordB[i]);
+                }
+            }
+
+            digitalWrite(attPin, HIGH); // disable joystick
+
+            // Check to see if we received valid data or not.
+            // We should be in analog mode for our data to be valid (analog == 0x7_)
+            if ((gamepadData[1] & 0xf0) == 0x70) {
+                success = true;
+            } else {
+                // If we got to here, we are not in analog mode, try to recover...
+                reconfig();
+                tries++;
+            }
+        } while (tries < 10 && !success);
+
+        prevButtonData = buttonData;
+
+        buttonData = ((uint16_t)gamepadData[4] << 8) | gamepadData[3];
+    }
+
+    void PS2Gamepad::poll(uint8_t motorA, uint8_t motorB) {
+        this->motorA = motorA;
+        this->motorB = motorB;
+        poll();
+    }
+
+    bool PS2Gamepad::getDigitalValue(uint8_t button) {
+        if (/*button >= 0 && */ button <= 15) return (~buttonData >> button) & 1;
+        else return 0;
+    }
+
+    uint8_t PS2Gamepad::getAnalogValue(uint8_t button) {
+        return gamepadData[button];
+    }
+
+    uint8_t PS2Gamepad::shift(uint8_t data) {
+        uint8_t tmp = 0;
+
+        for (int i = 0; i < 8; i++) {
+            if (data & (1 << i)) digitalWrite(cmdPin, HIGH);
+            else digitalWrite(cmdPin, LOW);
+
+            digitalWrite(clockPin, LOW);
+            delayMicroseconds(5);
+
+            if (digitalRead(dataPin)) bitSet(tmp, i);
+
+            digitalWrite(clockPin, HIGH);
+            delayMicroseconds(5);
+        }
+
+        digitalWrite(cmdPin, HIGH);
+        delayMicroseconds(5);
+
+        return tmp;
+    }
+
+    void PS2Gamepad::sendEnter() {
+        digitalWrite(attPin, LOW);
+
+        shift(0x01);
+        shift(0x43);
+        shift(0x00);
+        shift(0x01);
+        shift(0x00);
+
+        digitalWrite(attPin, HIGH);
+    }
+
+    void PS2Gamepad::sendMode() {
+        digitalWrite(attPin, LOW);
+
+        shift(0x01);
+        shift(0x44);
+        shift(0x00);
+        shift(0x01);
+        shift(0x03);
+        shift(0x00);
+        shift(0x00);
+        shift(0x00);
+        shift(0x00);
+
+        digitalWrite(attPin, HIGH);
+    }
+
+    void PS2Gamepad::sendRumble() {
+        digitalWrite(attPin, LOW);
+
+        shift(0x01);
+        shift(0x4D);
+        shift(0x00);
+        shift(0x00);
+        shift(0x01);
+
+        digitalWrite(attPin, HIGH);
+    }
+
+    void PS2Gamepad::sendBytesLarge() {
+        digitalWrite(attPin, LOW);
+
+        shift(0x01);
+        shift(0x4F);
+        shift(0x00);
+        shift(0xFF);
+        shift(0xFF);
+        shift(0x03);
+        shift(0x00);
+        shift(0x00);
+        shift(0x00);
+
+        digitalWrite(attPin, HIGH);
+    }
+
+    void PS2Gamepad::sendExit() {
+        digitalWrite(attPin, LOW);
+
+        shift(0x01);
+        shift(0x43);
+        shift(0x00);
+        shift(0x00);
+        shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+
+        digitalWrite(attPin, HIGH);
+    }
+
+    void PS2Gamepad::sendRead() {
+        digitalWrite(attPin, LOW);
+
+        shift(0x01);
+        shift(0x45);
+        shift(0x00);
+        controllerType = shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+        shift(0x5A);
+
+        digitalWrite(attPin, HIGH);
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/PS2Gamepad.h

@@ -0,0 +1,93 @@
+#ifndef SimpleButton_PS2Gamepad_h
+#define SimpleButton_PS2Gamepad_h
+
+#include "Button.h"
+#include "AnalogStick.h"
+
+namespace simplebutton {
+    class PS2Gamepad {
+        public:
+            ButtonAnalog* up    = NULL;
+            ButtonAnalog* down  = NULL;
+            ButtonAnalog* left  = NULL;
+            ButtonAnalog* right = NULL;
+
+            ButtonAnalog* l1 = NULL;
+            ButtonAnalog* l2 = NULL;
+            ButtonAnalog* r1 = NULL;
+            ButtonAnalog* r2 = NULL;
+
+            ButtonAnalog* square   = NULL;
+            ButtonAnalog* triangle = NULL;
+            ButtonAnalog* cross    = NULL;
+            ButtonAnalog* circle   = NULL;
+
+            Button* select = NULL;
+            Button* start  = NULL;
+
+            AnalogStick* analogLeft  = NULL;
+            AnalogStick* analogRight = NULL;
+
+            PS2Gamepad();
+            PS2Gamepad(uint8_t clockPin, uint8_t cmdPin, uint8_t attPin, uint8_t dataPin, bool analog = true);
+            ~PS2Gamepad();
+
+            void setup(uint8_t clockPin, uint8_t cmdPin, uint8_t attPin, uint8_t dataPin, bool analog = true);
+            void reconfig();
+
+            void update();
+
+            String getError();
+
+            bool connected();
+
+            void setUpdateInterval(uint32_t updateInterval);
+            void setMotors(uint8_t motorA, uint8_t motorB);
+
+        private:
+            void poll();
+            void poll(uint8_t motorA, uint8_t motorB);
+
+            bool getDigitalValue(uint8_t button);
+            uint8_t getAnalogValue(uint8_t button);
+
+            // config
+            uint8_t motorA = 0x00; // 0 = OFF, 1 = ONN
+            uint8_t motorB = 0x00; // usually 0-39 = OFF, 40 - 255 = ON
+
+            bool rumbleEnabled   = false;
+            bool pressureEnabled = false;
+
+            uint32_t updateInterval = 25;
+
+            // class variables
+            bool is_connected = false;
+
+            uint8_t errorCode      = 0;
+            uint8_t controllerType = 0;
+            uint8_t gamepadData[21];
+
+            uint16_t buttonData     = 0;
+            uint16_t prevButtonData = 0;
+
+            uint32_t lastPoll = 0;
+
+            uint8_t clockPin = 0;
+            uint8_t cmdPin   = 0;
+            uint8_t attPin   = 0;
+            uint8_t dataPin  = 0;
+
+            // in/output
+            uint8_t shift(uint8_t data);
+
+            // commands
+            void sendEnter();
+            void sendMode();
+            void sendRumble();
+            void sendBytesLarge();
+            void sendExit();
+            void sendRead();
+    };
+}
+
+#endif // ifndef SimpleButton_PS2Gamepad_h

esp8266_deauther/src/SimpleButton/Buttons/RotaryEncoder.cpp

@@ -0,0 +1,172 @@
+#include "RotaryEncoder.h"
+
+namespace simplebutton {
+    RotaryEncoder::RotaryEncoder() {
+        setButtons(NULL, NULL, NULL);
+    }
+
+    RotaryEncoder::RotaryEncoder(uint8_t channelA, uint8_t channelB, uint8_t button) {
+        setup(channelA, channelB, button);
+    }
+
+    RotaryEncoder::RotaryEncoder(GPIOExpander* pcf, uint8_t channelA, uint8_t channelB, uint8_t button) {
+        setup(pcf, channelA, channelB, button);
+    }
+
+    RotaryEncoder::RotaryEncoder(Button* clockwise, Button* anticlockwise, Button* button) {
+        setup(clockwise, anticlockwise, button);
+    }
+
+    RotaryEncoder::~RotaryEncoder() {
+        if (this->clockwise) delete this->clockwise;
+        if (this->anticlockwise) delete this->anticlockwise;
+        if (this->button) delete this->button;
+    }
+
+    void RotaryEncoder::setup(uint8_t channelA, uint8_t channelB, uint8_t button) {
+        this->clockwise     = new ButtonPullup(channelA);
+        this->anticlockwise = new ButtonPullup(channelB);
+        this->button        = new ButtonPullup(button);
+
+        prevA = clockwise->read();
+        prevB = anticlockwise->read();
+    }
+
+    void RotaryEncoder::setup(GPIOExpander* pcf, uint8_t channelA, uint8_t channelB, uint8_t button) {
+        this->clockwise     = new ButtonPullupGPIOExpander(pcf, channelA);
+        this->anticlockwise = new ButtonPullupGPIOExpander(pcf, channelB);
+        this->button        = new ButtonPullupGPIOExpander(pcf, button);
+
+        prevA = clockwise->read();
+        prevB = anticlockwise->read();
+    }
+
+    void RotaryEncoder::setup(Button* clockwise, Button* anticlockwise, Button* button) {
+        setButtons(clockwise, anticlockwise, button);
+
+        prevA = clockwise->read();
+        prevB = anticlockwise->read();
+    }
+
+    void RotaryEncoder::update() {
+        update(clockwise->read(), anticlockwise->read(), button->read());
+    }
+
+    void RotaryEncoder::update(bool stateA, bool stateB, bool buttonState) {
+        button->update(buttonState);
+
+        if (curState == State::STILL) {
+            if ((stateA != prevA) && (stateB == prevB)) {
+                prevA    = stateA;
+                curState = State::ANTICLOCKWISE;
+            } else if ((stateA == prevA) && (stateB != prevB)) {
+                prevB    = stateB;
+                curState = State::CLOCKWISE;
+            }
+        } else if ((curState != State::STILL) && (stateA == stateB)) {
+            prevA = stateA;
+            prevB = stateB;
+
+            if (curState == prevState) steps++;
+            else steps = 1;
+
+            if (steps >= button_steps) {
+                if (curState == State::CLOCKWISE) {
+                    if (!inverted) goClockwise();
+                    else goAnticlockwise();
+                } else if (curState == State::ANTICLOCKWISE)  {
+                    if (!inverted) goAnticlockwise();
+                    else goClockwise();
+                }
+
+                steps = 0;
+            }
+
+            prevState = curState;
+            curState  = State::STILL;
+        }
+    }
+
+    void RotaryEncoder::reset() {
+        button->reset();
+        clockwise->reset();
+        anticlockwise->reset();
+
+        curState  = State::STILL;
+        prevState = State::STILL;
+
+        steps = 0;
+    }
+
+    int32_t RotaryEncoder::getPos() {
+        return pos;
+    }
+
+    void RotaryEncoder::setButtons(Button* clockwise, Button* anticlockwise, Button* button) {
+        if (this->clockwise) delete this->clockwise;
+        if (this->anticlockwise) delete this->anticlockwise;
+        if (this->button) delete this->button;
+
+        this->clockwise     = clockwise ? clockwise : new Button();
+        this->anticlockwise = anticlockwise ? anticlockwise : new Button();
+        this->button        = button ? button : new Button();
+    }
+
+    void RotaryEncoder::setPos(int32_t pos) {
+        this->pos = pos;
+    }
+
+    void RotaryEncoder::setMin(int32_t value) {
+        this->min = value;
+    }
+
+    void RotaryEncoder::setMax(int32_t value) {
+        this->max = value;
+    }
+
+    void RotaryEncoder::setEncoding(uint8_t steps) {
+        if ((steps == 1) || (steps == 2) || (steps == 4)) this->button_steps = steps;
+    }
+
+    void RotaryEncoder::enableLoop(bool loop) {
+        this->loop = loop;
+    }
+
+    void RotaryEncoder::setInverted(bool inverted) {
+        this->inverted = inverted;
+    }
+
+    void RotaryEncoder::goClockwise() {
+        clockwise->click();
+        anticlockwise->reset();
+        if (pos < max) pos++;
+        else if (loop) pos = min;
+    }
+
+    void RotaryEncoder::goAnticlockwise() {
+        anticlockwise->click();
+        clockwise->reset();
+        if (pos > min) pos--;
+        else if (loop) pos = max;
+    }
+
+    bool RotaryEncoder::clicked() {
+        return button->clicked();
+    }
+
+    bool RotaryEncoder::incremented() {
+        return clockwise->clicked();
+    }
+
+    bool RotaryEncoder::decremented() {
+        return anticlockwise->clicked();
+    }
+
+    bool RotaryEncoder::minVal() {
+        return pos == min;
+    }
+
+    bool RotaryEncoder::maxVal() {
+        return pos == max;
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/RotaryEncoder.h

@@ -0,0 +1,71 @@
+#ifndef SimpleButton_RotaryEncoder_h
+#define SimpleButton_RotaryEncoder_h
+
+#include "Button.h"
+#include "ButtonPullup.h"
+#include "ButtonGPIOExpander.h"
+#include "ButtonPullupGPIOExpander.h"
+
+namespace simplebutton {
+    class RotaryEncoder {
+        public:
+            Button* button        = NULL;
+            Button* clockwise     = NULL;
+            Button* anticlockwise = NULL;
+
+            RotaryEncoder();
+            RotaryEncoder(uint8_t channelA, uint8_t channelB, uint8_t button);
+            RotaryEncoder(GPIOExpander* pcf, uint8_t channelA, uint8_t channelB, uint8_t button);
+            RotaryEncoder(Button* clockwise, Button* anticlockwise, Button* button);
+
+            ~RotaryEncoder();
+
+            void setup(uint8_t channelA, uint8_t channelB, uint8_t button);
+            void setup(GPIOExpander* pcf, uint8_t channelA, uint8_t channelB, uint8_t button);
+            void setup(Button* clockwise, Button* anticlockwise, Button* button);
+
+            void update();
+            void update(bool stateA, bool stateB, bool buttonState);
+
+            void reset();
+
+            int32_t getPos();
+
+            void setButtons(Button* clockwise, Button* anticlockwise, Button* button);
+            void setPos(int32_t pos);
+            void enableLoop(bool loop);
+            void setEncoding(uint8_t steps);
+            void setMin(int32_t value);
+            void setMax(int32_t value);
+            void setInverted(bool inverted);
+
+            bool clicked();
+            bool incremented();
+            bool decremented();
+            bool minVal();
+            bool maxVal();
+
+        private:
+            int32_t pos = 0;
+
+            bool prevA = false;
+            bool prevB = false;
+
+            enum State { STILL = 0, CLOCKWISE = 1, ANTICLOCKWISE = 2 };
+            State curState  = State::STILL;
+            State prevState = State::STILL;
+
+            uint8_t button_steps = 1; // how many steps per turn (encoding)
+            uint8_t steps        = 0; // tmp counter
+
+            int32_t min   = -128;
+            int32_t max   = 127;
+            bool loop     = false;
+            bool inverted = false;
+
+            void goClockwise();
+            void goAnticlockwise();
+    };
+}
+
+#endif // ifndef SimpleButton_RotaryEncoder_h

esp8266_deauther/src/SimpleButton/Buttons/RotaryEncoderI2C.cpp

@@ -0,0 +1,276 @@
+#include "RotaryEncoderI2C.h"
+namespace simplebutton {
+    RotaryEncoderI2C::RotaryEncoderI2C() {
+        setup(0x30);
+    }
+
+    RotaryEncoderI2C::RotaryEncoderI2C(uint8_t i2cAddress) {
+        setup(i2cAddress);
+    }
+
+    RotaryEncoderI2C::RotaryEncoderI2C(uint8_t i2cAddress, TwoWire* wire) {
+        setup(i2cAddress, wire);
+    }
+
+    RotaryEncoderI2C::~RotaryEncoderI2C() {}
+
+    void RotaryEncoderI2C::setup(uint8_t i2cAddress) {
+        setup(i2cAddress, &Wire);
+    }
+
+    void RotaryEncoderI2C::setup(uint8_t i2cAddress, TwoWire* wire) {
+        this->i2cAddress = i2cAddress;
+        this->wire       = wire;
+
+        this->clockwise     = new Button();
+        this->anticlockwise = new Button();
+        this->button        = new Button();
+
+        setMin(-128);
+        setMax(127);
+
+        begin();
+    }
+
+    bool RotaryEncoderI2C::interrupt() {
+        if (interruptEnable) return digitalRead(interruptPin) == LOW;
+
+        return true;
+    }
+
+    void RotaryEncoderI2C::enableInterrupt(uint8_t pin, bool pullup) {
+        interruptPin    = pin;
+        interruptEnable = true;
+        interruptPullup = pullup;
+        pinMode(pin, INPUT);
+    }
+
+    bool RotaryEncoderI2C::update() {
+        if (interrupt()) {
+            readStatus();
+
+            if (clicked()) button->click();
+
+            if (incremented()) clockwise->click();
+
+            if (decremented()) anticlockwise->click();
+
+            return true;
+        }
+
+        return false;
+    }
+
+    void RotaryEncoderI2C::begin() {
+        uint8_t config = 0x00;
+
+        if (interruptEnable) config = config | 0x01;
+        if (ledEnabled) config = config | 0x02;
+        if (loop) config = config | 0x04;
+        if (inverted) config = config | 0x08;
+        if (!interruptPullup) config = config | 0x10;
+        if (encoding) config = config | 0x20;
+
+        setConfig(config);
+    }
+
+    void RotaryEncoderI2C::reset() {
+        button->reset();
+        clockwise->reset();
+        anticlockwise->reset();
+
+        setConfig(0x80);
+        update();
+    }
+
+    bool RotaryEncoderI2C::connected() {
+        return error == 0;
+    }
+
+    String RotaryEncoderI2C::getError() {
+        String msg;
+
+        switch (error) {
+        case 0:
+            msg += "OK";
+            break;
+
+        case 1:
+            msg += String(F("Data too long to fit in transmit buffer"));
+            break;
+
+        case 2:
+            msg += String(F("Received NACK on transmit of address"));
+            break;
+
+        case 3:
+            msg += String(F("Received NACK on transmit of data"));
+
+        case 4:
+            msg += String(F("Unknown transmission error"));
+            break;
+
+        case 5:
+            msg += String(F("I2C error"));
+            break;
+        }
+
+        return msg;
+    }
+
+    void RotaryEncoderI2C::setConfig(uint8_t config) {
+        write(0x00, config);
+    }
+
+    void RotaryEncoderI2C::enableLed(bool led) {
+        ledEnabled = led;
+    }
+
+    void RotaryEncoderI2C::enableLoop(bool loop) {
+        this->loop = loop;
+    }
+
+    void RotaryEncoderI2C::setEncoding(uint8_t encoding) {
+        if (encoding == 1) this->encoding = false;
+        else if (encoding == 2) this->encoding = true;
+    }
+
+    void RotaryEncoderI2C::setInverted(bool inverted) {
+        this->inverted = inverted;
+    }
+
+    void RotaryEncoderI2C::setPos(int32_t value) {
+        write(0x02, value);
+    }
+
+    void RotaryEncoderI2C::setMin(int32_t value) {
+        write(0x0A, value);
+    }
+
+    void RotaryEncoderI2C::setMax(int32_t value) {
+        write(0x06, value);
+    }
+
+    void RotaryEncoderI2C::setLed(uint8_t valueA, uint8_t valueB) {
+        setLedA(valueA);
+        setLedB(valueB);
+    }
+
+    void RotaryEncoderI2C::setLedA(uint8_t value) {
+        if (ledEnabled) write(0x0E, value);
+    }
+
+    void RotaryEncoderI2C::setLedB(uint8_t value) {
+        if (ledEnabled) write(0x0F, value);
+    }
+
+    int32_t RotaryEncoderI2C::getPos() {
+        return read32(0x02);
+    }
+
+    uint8_t RotaryEncoderI2C::readStatus() {
+        status = read(0x01);
+        return status;
+    }
+
+    uint8_t RotaryEncoderI2C::readLedA() {
+        return read(0x0E);
+    }
+
+    uint8_t RotaryEncoderI2C::readLedB() {
+        return read(0x0F);
+    }
+
+    int32_t RotaryEncoderI2C::readMax() {
+        return read32(0x06);
+    }
+
+    int32_t RotaryEncoderI2C::readMin() {
+        return read32(0x0A);
+    }
+
+    bool RotaryEncoderI2C::clicked() {
+        return status & 0x01;
+    }
+
+    bool RotaryEncoderI2C::incremented() {
+        return status & 0x02;
+    }
+
+    bool RotaryEncoderI2C::decremented() {
+        return status & 0x04;
+    }
+
+    bool RotaryEncoderI2C::minVal() {
+        return status & 0x10;
+    }
+
+    bool RotaryEncoderI2C::maxVal() {
+        return status & 0x08;
+    }
+
+    void RotaryEncoderI2C::write(uint8_t address, uint8_t value) {
+        wire->beginTransmission(i2cAddress);
+
+        wire->write(address);
+        wire->write(value);
+
+        error = wire->endTransmission();
+    }
+
+    void RotaryEncoderI2C::write(uint8_t address, int32_t value) {
+        wire->beginTransmission(i2cAddress);
+
+        wire->write(address);
+        wire->write(((uint32_t)value >> 24) & 0xFF);
+        wire->write(((uint32_t)value >> 16) & 0xFF);
+        wire->write(((uint32_t)value >> 8) & 0xFF);
+        wire->write((uint32_t)value & 0xFF);
+
+        error = wire->endTransmission();
+    }
+
+    uint8_t RotaryEncoderI2C::read(uint8_t address) {
+        uint8_t data = 0xFF;
+
+        // ask for some sweet data
+
+        wire->beginTransmission(i2cAddress);
+        wire->write(address);
+        error = wire->endTransmission();
+
+        // read out the sweet data
+        wire->requestFrom(i2cAddress, (uint8_t)1);
+
+        if (wire->available() == 1) {
+            data = wire->read();
+        } else {
+            error = ROTARY_ENCODER_I2C_ERROR;
+        }
+
+        return data;
+    }
+
+    int32_t RotaryEncoderI2C::read32(uint8_t address) {
+        uint32_t data = 0xFFFFFFFF;
+
+        // ask for some sweet data
+        wire->beginTransmission(i2cAddress);
+        wire->write(address);
+        error = wire->endTransmission();
+
+        // read out the sweet data
+        wire->requestFrom(i2cAddress, (uint8_t)4);
+
+        if (wire->available() == 4) {
+            data = wire->read();
+            data = (data << 8) | wire->read();
+            data = (data << 8) | wire->read();
+            data = (data << 8) | wire->read();
+        } else {
+            error = ROTARY_ENCODER_I2C_ERROR;
+        }
+
+        return (int32_t)data;
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/RotaryEncoderI2C.h

@@ -0,0 +1,92 @@
+#ifndef SimpleButton_RotaryEncoderI2C_h
+#define SimpleButton_RotaryEncoderI2C_h
+
+#include "Arduino.h"
+#include <Wire.h>
+
+#define ROTARY_ENCODER_I2C_ERROR 5
+
+#include "Button.h"
+
+namespace simplebutton {
+    class RotaryEncoderI2C {
+        public:
+            Button* clockwise     = NULL;
+            Button* anticlockwise = NULL;
+            Button* button        = NULL;
+
+            RotaryEncoderI2C();
+            RotaryEncoderI2C(uint8_t i2cAddress);
+            RotaryEncoderI2C(uint8_t i2cAddressdress, TwoWire* wire);
+
+            ~RotaryEncoderI2C();
+
+            void setup(uint8_t i2cAddress);
+            void setup(uint8_t i2cAddress, TwoWire* wire);
+
+            bool update();
+
+            void begin();
+            void reset();
+
+            bool connected();
+            String getError();
+
+            void setConfig(uint8_t config);
+
+            void enableInterrupt(uint8_t pin, bool pullup);
+            void enableLed(bool led);
+            void enableLoop(bool loop);
+            void setEncoding(uint8_t encoding);
+            void setInverted(bool inverted);
+
+            bool interrupt();
+
+            void setPos(int32_t value);
+            void setMin(int32_t value);
+            void setMax(int32_t value);
+            void setLed(uint8_t valueA, uint8_t valueB);
+            void setLedA(uint8_t value);
+            void setLedB(uint8_t value);
+
+            int32_t getPos();
+
+            uint8_t readStatus();
+            uint8_t readLedA();
+            uint8_t readLedB();
+            int32_t readMax();
+            int32_t readMin();
+
+            bool clicked();
+            bool incremented();
+            bool decremented();
+            bool minVal();
+            bool maxVal();
+
+        private:
+            // temp variables
+            uint8_t status = 0x00;
+            uint8_t error  = 0;
+
+            // i2c stuff
+            uint8_t i2cAddress = 0x00;
+            TwoWire* wire      = NULL;
+
+            // config
+            uint8_t interruptPin = 0;
+            bool interruptEnable = false; // INTE
+            bool interruptPullup = true;
+            bool ledEnabled      = false; // LEDE
+            bool encoding        = false; // x1 = false, x2 = true
+            bool loop            = false; // WRAPE
+            bool inverted        = false; // DIRE
+
+            // internal functions
+            void write(uint8_t address, uint8_t value);
+            void write(uint8_t address, int32_t value);
+
+            uint8_t read(uint8_t address);
+            int32_t read32(uint8_t address);
+    };
+}
+#endif // ifndef SimpleButton_RotaryEncoderI2C_h

esp8266_deauther/src/SimpleButton/Buttons/Switch.cpp

@@ -0,0 +1,63 @@
+#include "Switch.h"
+
+namespace simplebutton {
+    Switch::Switch() {
+        button = new Button();
+    }
+
+    Switch::Switch(uint8_t pin) {
+        setup(pin);
+    }
+
+    Switch::Switch(GPIOExpander* pcf, uint8_t pin) {
+        setup(pcf, pin);
+    }
+
+    Switch::Switch(Button* button) {
+        setup(button);
+    }
+
+    Switch::~Switch() {
+        if (this->button) delete this->button;
+    }
+
+    void Switch::setup(uint8_t pin) {
+        button   = new Button(pin);
+        tmpState = button->read();
+    }
+
+    void Switch::setup(GPIOExpander* pcf, uint8_t pin) {
+        button   = new ButtonGPIOExpander(pcf, pin);
+        tmpState = button->read();
+    }
+
+    void Switch::setup(Button* button) {
+        setButton(button);
+        tmpState = button->read();
+    }
+
+    void Switch::update() {
+        update(button->read());
+    }
+
+    void Switch::update(bool state) {
+        bool prevState = tmpState;
+
+        tmpState = state > 0;
+
+        if (prevState != tmpState) button->click();
+    }
+
+    void Switch::setButton(Button* button) {
+        if (this->button) delete this->button;
+        this->button = button ? button : new Button();
+    }
+
+    bool Switch::getState() {
+        return tmpState;
+    }
+
+    bool Switch::clicked() {
+        return button->clicked();
+    }
+}

esp8266_deauther/src/SimpleButton/Buttons/Switch.h

@@ -0,0 +1,36 @@
+#ifndef SimpleButton_Switch_h
+#define SimpleButton_Switch_h
+
+#include "Button.h"
+#include "ButtonGPIOExpander.h"
+
+namespace simplebutton {
+    class Switch {
+        public:
+            Button* button = NULL;
+
+            Switch();
+            Switch(uint8_t pin);
+            Switch(GPIOExpander* pcf, uint8_t pin);
+            Switch(Button* button);
+
+            ~Switch();
+
+            void setup(uint8_t pin);
+            void setup(GPIOExpander* pcf, uint8_t pin);
+            void setup(Button* button);
+
+            void update();
+            void update(bool state);
+
+            void setButton(Button* button);
+
+            bool getState();
+            bool clicked();
+
+        private:
+            bool tmpState = false;
+    };
+}
+
+#endif // ifndef SimpleButton_Switch_h

esp8266_deauther/src/SimpleButton/Events/ClickEvent.cpp

@@ -0,0 +1,28 @@
+#include "ClickEvent.h"
+
+namespace simplebutton {
+    ClickEvent::ClickEvent(ButtonEventFunction, uint32_t minPushTime, uint32_t minReleaseTime) {
+        this->fnct           = fnct;
+        this->minPushTime    = minPushTime;
+        this->minReleaseTime = minReleaseTime;
+    }
+
+    ClickEvent::~ClickEvent() {
+        if (next) {
+            delete next;
+            next = NULL;
+        }
+    }
+
+    uint8_t ClickEvent::getMode() {
+        return MODE::CLICKED;
+    }
+
+    uint32_t ClickEvent::getMinPushTime() {
+        return minPushTime;
+    }
+
+    uint32_t ClickEvent::getMinReleaseTime() {
+        return minReleaseTime;
+    }
+}

esp8266_deauther/src/SimpleButton/Events/ClickEvent.h

@@ -0,0 +1,22 @@
+#ifndef SimpleButton_ClickEvent_h
+#define SimpleButton_ClickEvent_h
+
+#include "Event.h"
+
+namespace simplebutton {
+    class ClickEvent : public Event {
+        public:
+            ClickEvent(ButtonEventFunction, uint32_t minPushTime, uint32_t minReleaseTime);
+            ~ClickEvent();
+
+            uint8_t getMode();
+            uint32_t getMinPushTime();
+            uint32_t getMinReleaseTime();
+
+        private:
+            uint32_t minPushTime    = 0;
+            uint32_t minReleaseTime = 0;
+    };
+}
+
+#endif // ifndef SimpleButton_ClickEvent_h