mirror of https://github.com/pbatard/rufus.git
27 lines
1.6 KiB
Markdown
27 lines
1.6 KiB
Markdown
<!--PLEASE READ THIS CAREFULLY: You *MUST* read and complete the checklist below, by placing an x into each [ ] (so that it shows '[x]', NOT '[ x]' or '[x ]'), BEFORE clicking on 'Submit new issue'. Failure to perform these steps, WHICH ARE ONLY THERE TO HELP *YOU*, will result in the issue being dismissed without warning.-->
|
|
|
|
Checklist
|
|
---------
|
|
- [ ] I looked at https://github.com/pbatard/rufus/wiki/FAQ to see if my question has already been answered.
|
|
- [ ] I performed a search in the issue tracker for similar issues using keywords relevant to my problem, such as the error message I got from the log.
|
|
- [ ] I clicked the 'Log' button or pressed <kbd>Ctrl</kbd>-<kbd>L</kbd> in Rufus, and copy/pasted the log into the line that says `<FULL LOG>` below.
|
|
- [ ] The log I am copying is the FULL log, starting with the line `Rufus version: x.y.z` - I have NOT removed any part of it.
|
|
|
|
Additionally (if applicable):
|
|
- [ ] I ran a bad blocks check, by clicking _Show advanced format options_ then _Check device for bad blocks_, and confirmed that my USB is not defective.
|
|
- [ ] I also tried one or more of the following:
|
|
- [ ] Using a different USB drive.
|
|
- [ ] Plugging the USB into a different port.
|
|
- [ ] Running Rufus on a different computer.
|
|
- [ ] If using an image, I clicked on the `(✓)` button to compute the MD5, SHA1 and SHA256 checksums, which are therefore present in the log I copied. I confirmed, by performing an internet search, that these values match the ones from the official image.
|
|
|
|
Issue description
|
|
-----------------
|
|
<Please describe your issue here>
|
|
|
|
Log
|
|
---
|
|
```
|
|
<FULL LOG>
|
|
```
|