d5d1f16165
* add matrix_diagram.md * refactor keymaps * fix Configurator implementation The original C-based code had an off-by-one error in the key sequence, that was then converted in data-driven configurator without being corrected. * info.json: apply friendly formatting * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_ansi * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_ansi_tsangan * add LAYOUT_60_iso_split_bs_rshift * add LAYOUT_60_iso * add LAYOUT_60_iso_tsangan_split_bs_rshift * add LAYOUT_60_iso_tsangan * enable Community Layout support * edit keyboard maintainer
15 lines
905 B
Markdown
15 lines
905 B
Markdown
# Polaris-Compatible Hotswap and Solder PCB's
|
|
|
|
The following is the QMK Firmware for the Polaris-Compatible Hotswap and Solder PCB's developed by FJLaboratories (FJLabs).
|
|
|
|
* Keyboard Maintainer: [mrnoisytiger (FJLabs)](https://github.com/mrnoisytiger)
|
|
* Hardware Supported: Polaris Hotswap and Solder
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make fjlabs/polaris:default
|
|
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.
|