Michael Lutz
8dda387f82
Codechange: Use std::tuple for slope functions with two return values
2024-03-08 18:08:55 +01:00
Kuhnovic
b38d3c2208
Change: simplified water region evaluation, removed savegame data ( #11750 )
2024-01-21 20:56:50 +00:00
Kuhnovic
f1e999ec59
Feature: Region-based pathfinder for ships ( #10543 )
2024-01-08 20:29:05 +01:00
PeterN
acd7d3c913
Codechange: Rename *Railtype* to *RailType* for consistency. ( #11287 )
2023-09-11 08:55:12 +00:00
Rubidium
eaae0bb5e7
Codechange: automatic adding of _t to (u)int types, and WChar to char32_t
...
for i in `find src -type f|grep -v 3rdparty/fmt|grep -v 3rdparty/catch2|grep -v 3rdparty/opengl|grep -v stdafx.h`; do sed 's/uint16& /uint16 \&/g;s/int8\([ >*),;[]\)/int8_t\1/g;s/int16\([ >*),;[]\)/int16_t\1/g;s/int32\([ >*),;[]\)/int32_t\1/g;s/int64\([ >*),;[]\)/int64_t\1/g;s/ uint32(/ uint32_t(/g;s/_uint8_t/_uint8/;s/Uint8_t/Uint8/;s/ft_int64_t/ft_int64/g;s/uint64$/uint64_t/;s/WChar/char32_t/g;s/char32_t char32_t/char32_t WChar/' -i $i; done
2023-07-19 19:30:14 +02:00
Patric Stout
7aa2b9ab0a
Codechange: move all date-related variables inside the timer ( #10706 )
2023-04-24 15:56:01 +00:00
Rubidium
9d2a0f3d0b
Change: make GetPartialZ consistent, meaning Z of adjacent slopes continue
...
Previously, on a straight line of a one corner up slope with the adjacent
steep sloop the Z would increase one step every two sub pixels, except for one
case where one sub pixel is skipped. Similarly, a steep slope with two
adjacent one corner up slopes, would have a bump in the height line along the
diagonal whenever it enters/leaves the steep slope tile.
2023-04-09 19:00:26 +02:00
Rubidium
e8af8daa68
Codechange: pass "ground vehicle" to GetTileSlopeZ since for tunnel/bridges there are two states
...
Previously it checked the position in non-driving direction to "guess" whether
a ground vehicle was using the function, so on tunnels/bridges it could either
return the Z of the (virtual) ground compared to the Z of the path the vehicle
would take.
2023-04-09 19:00:26 +02:00
rubidium42
6ba55e663e
Codechange: do not hide variables with other variables
2023-01-29 07:21:34 +01:00
Rubidium
fe2bcd2a58
Codechange: migrate size related functions to Map structure
2023-01-21 17:11:40 +01:00
Francis Herne
01be423237
Fix #10362 : NewGRF bridges without speed limits.
...
For bridges, a max speed of 0xFFFF (i.e. no effective limit)
is no longer displayed as a limit in the UI.
A max speed of 0 is also considered unlimited, for similarity to the
roadtype and railtype interface.
2023-01-19 22:24:33 +01:00
Loïc Guilloux
c50fabb574
Fix #10208 : allow to use specific underlay for road/tram tunnels ( #10233 )
2022-12-17 09:01:47 -05:00
SamuXarick
c7505539af
Fix #9869 : remove docking tile when doing a clear square
...
Terraforming through objects placed on water didn't properly remove docking tiles as expected.
By moving some logic regarding removal of docking tiles into DoClearSquare, the issue is solved, while also simplifying code, avoiding repetition elsewhere.
2022-10-16 18:29:03 +02:00
J0anJosep
d9a37c915f
Cleanup #9725 : Replace cmd_helper related functions and remove cmd_helper.h.
2022-02-02 21:30:15 +01:00
Michael Lutz
c521b965bd
Codechange: Don't use a global for the terrforming error tile.
2021-12-16 22:28:32 +01:00
Michael Lutz
c6d7b98808
Codechange: Un-bitstuff landscape commands.
2021-12-16 22:28:32 +01:00
Michael Lutz
46bd2f1ced
Codechange: Un-bitstuff remaining transport infrastructure commands.
2021-12-16 22:28:32 +01:00
Michael Lutz
e740c24eb7
Codechange: Template DoCommand to automagically reflect the parameters of the command proc.
...
When finished, this will allow each command handler to take individually
different parameters, obliviating the need for bit-packing.
2021-12-16 22:28:32 +01:00
Michael Lutz
7048e1522f
Codechange: Move flags in CommandProc in front of the command arguments.
2021-12-16 22:28:32 +01:00
Michael Lutz
33ca4f2b99
Codechange: Let the compile generate the master command table out of templated command traits.
...
This is using a non-intrusive type-traits like templated system, which
allows compile-time validation that the command table and the command
enum match up.
2021-12-16 22:28:32 +01:00
Michael Lutz
b6933a2ebd
Codechange: Move command arguments to the back of the DoCommand function call.
2021-12-16 22:28:32 +01:00
Patric Stout
28e90769f7
Codechange: use "[[maybe_unused]]" instead of a wide variety of other ways we had
...
While at it, replace OTTD_ASSERT with WITH_ASSERT, as this
is always set if assert() is valid. No matter if NDEBUG is set
or not.
2021-06-03 17:30:00 +02:00
rubidium42
2e136285e1
Codechange: move from C-string to std::string for DoCommand
2021-05-29 19:02:18 +02:00
glx22
2feb801e56
Codechange: Replace FOR_ALL_ROADTRAMTYPES with range-based for loops
2021-05-03 19:46:57 +02:00
Patric Stout
fece1c57ca
Codechange: Suppress warnings when asserts are disabled ( #8917 )
2021-04-01 11:16:19 +02:00
Patric Stout
aac8c28d73
Fix #7656 : destroying a tunnel/bridge now first removes the tracks for cost calculation
...
This means that for rail tunnel/bridges, the rail is first sold,
and the tunnel/bridge is destroyed after. This means destroying
tunnels/ bridges now often makes you money, instead of costing.
Similar, with road/tram tracks. Destroying a road+tram
tunnel/bridge now costs the same amount of money as first
removing the tram tracks and than destroying the road
tunnel/bridge. Especially as tram tracks generate money when
removing, this is a noticeable difference.
2021-01-08 12:02:25 +01:00
Patric Stout
ebd9f26c15
Fix: replacing a bridge didn't charge for clearing last tile
...
It only considered the end-tile (or start-tile) for the bridge,
instead of both. This is obvious in the rest of the code which
constantly does "+ 2"; this being the only place that does a "+ 1".
2021-01-08 12:02:25 +01:00
Charles Pigott
9b800a96ed
Codechange: Remove min/max functions in favour of STL variants ( #8502 )
2021-01-08 11:16:18 +01:00
J0anJosep
edbb5f4f73
Doc: Remove some SmallVector references from documentation.
2020-12-27 18:40:18 +00:00
Michael Lutz
79240eab1e
Codechange: Make use of the improved C++17 emplace_back function.
2020-12-15 00:29:30 +01:00
ilayaraja97
cf8ccf4b08
Fix #8131 : small bridges also have pillars drawn
2020-06-28 13:54:04 +01:00
Niels Martin Hansen
45838d0105
Fix #7958 : Use NewGRF provided catenary sprites when either front or back is overridden
2020-02-10 00:17:50 +01:00
Niels Martin Hansen
9e4eee1b9e
Codechange: Refactor road bridge catenary drawing
2020-02-10 00:17:50 +01:00
Charles Pigott
ab9042145e
Fix #6667 : Also recalculate bridge costs for 'spectated' AI companies
2020-01-05 20:51:45 +00:00
S. D. Cloudt
13cc8a0cee
Cleanup: Removed SVN headers
2019-11-10 17:59:20 +00:00
JMcKiern
04f659e768
Fix: Some typos found using codespell
2019-09-29 21:27:32 +01:00
peter1138
f538179878
Feature: Multi-tile docks and docking points.
2019-06-30 16:46:32 +02:00
peter1138
c02ef3e456
Feature: Add NotRoadTypes (NRT)
2019-05-01 21:36:27 +02:00
Henry Wilson
7c8e7c6b6e
Codechange: Use null pointer literal instead of the NULL macro
2019-04-10 23:22:20 +02:00
Henry Wilson
ab711e6942
Codechange: Replaced SmallVector::[Begin|End]() with std alternatives
2019-03-26 20:15:57 +00:00
Henry Wilson
a0f36a50e6
Codechange: Replaced SmallVector::Append() with std::vector::[push|emplace]_back()
2019-03-26 20:15:57 +00:00
Niels Martin Hansen
b8b6954fb5
Fix 6a3d411: Silence truncation warning
2019-01-05 17:21:29 +01:00
Charles Pigott
1778b2d66e
Codechange: Merge some duplicated functions
2018-10-31 12:41:49 +01:00
Charles Pigott
f5b1115039
Doc: Lots and lots of doxymentation fixes
2018-10-31 12:35:54 +01:00
Peter Nelson
bf8d7df736
Change: Extend rail types to 64 (6 bit storage)
2018-07-26 13:27:40 +01:00
Jonathan G Rennison
6a3d411fa1
Fix: Use after free in CmdBuildTunnel ( #6856 )
...
Use after free could occur when when excavating far end
removed multiple NewGRF objects
2018-07-22 21:58:05 +02:00
frosch
10293c5fb1
(svn r27686) -Change: List railtype of rail tiles explicitly in the tile info window.
2016-12-09 21:27:22 +00:00
frosch
d9bfe88261
(svn r27676) -Codechange: Rename catenary functions, so that they refer unambiguously to either RoadCatenary or RailCatenary.
2016-11-05 11:53:03 +00:00
frosch
55e53780cb
(svn r27313) -Fix [FS#6317]: Adding tram to town-owned bridges assigned an incorrect owner to the tram and did not count infrastructure counts properly. (marcole)
2015-06-21 09:52:30 +00:00
frosch
beb213f9ee
(svn r27209) -Add: Draw path reservation on the whole bridge, not only on the bridge heads.
2015-03-28 14:04:06 +00:00