This is used to delete
- all news about a vehicle, when it gets deleted
- "vehicle has stopped in depot" news, when it gets started
- "vehicle has invalid orders" news, when the orders get changed
As side effect this is a
-Fix: The default AI tried to change the service intervals of vehicles via the CMD_CHANGE_TRAIN_SERVICE_INT command - regardless of the type of the vehicle - which of course failed for non-trains
-Indentation
-Whitespace
-DeMorgan's Law
-Test with NULL or 0 for non-booleans
-'\0' instead of 0 for chars
-Remove redundantly redundant comments (like DoFoo(); // Do foo)
-Join multiple short lines with a single statement
-Split single lines with multiple statements
-Avoid assignments in if
running MaybeReplaceVehicle() is now delayed until after the loop in CallVehicleTicks()
This avoids selling the vehicle the loop currently works with (and continues to work with afterwards)
this var works like _new_train_id and the rest of that kind of vars, except it is set each time a vehicle is build, nomatter what type
this is a nice tool to code vehicle independent code, which in turn can reduce code duplication
Right now it's used in ReplaceVehicle() and CmdCloneVehicle()
- Feature: [pbs] Implement autoplacement of pbs blocks, when a block has an entry and an exit pbs signal, covert the entire block to pbs. Can be turned off in the patch settings.
- Feature: [pbs] Allow showing of reserved status by making the tracks darker, when the pbs debug level is at least 1.
- Codechange: [NPF] Check the railtype along a route against the engine type instead of against the previouse tile. This clears the way for electriefied rails.
- Add: [NPF] [ 1209644 ] A penalty for crossings (peter1138)
* Add: rail.[ch] for rail-related enums and wrapper functions.
* Codechange: Removed dozens of magic numbers with below enums.
* Codechange: Rewrote CheckTrackCombination().
* Add: TILE_SIZE, TILE_PIXELS and TILE_HEIGHT constants.
* Add: enums RailTileType, RailTileSubtype, SignalType to mask against the map arrays.
* Add: enums Track, TrackBits, Trackdir, TrackdirBits for railway track data. (Note that the old RAIL_BIT constants are replaced by TRACK_BIT ones).
* Add: enums Direction and DiagDirection
* Codechange: Moved a bunch of track(dir) related lookup arrays from npf.[ch] to rail.[ch].
* Codechange: move RailType enum from tile.h to rail.h.
* Add: Wrapper functions for masking signal status in the map arrays: SignalAlongTrackdir, SignalAgainstTrackdir and SignalOnTrack.
* Add: Wrapper functions to access rail tiles, using above enums
* Add: Wrapper functions to modify tracks, trackdirs, directions, etc.
* Add: Wrapper functions for all lookup arrays in rail.[ch] (Arrays are still used in parts of the code)
* Codechange: Renamed some variables and arguments to better represent what they contain (railbit -> track, bits -> trackdirbits, etc.).
* Codechange: Don't use FindLandscapeHeight() in CmdRemoveSingleRail(), since it returns way too much info. Use GetTileSlope() instead.
* Codechange: [NPF] Removed some unused globals and code from npf.c.
- CodeChange: since only the server will be able to modify difficulty settings, leave the checking of correct values besides, and trust users will join legit servers.
- CodeChange: for renaming signs, only check if GetDParam(); eg _decode_parameters is empty ('\0') or not, instead of the extra check of players, etc. That basically does the same thing. Also dirty sign two times when renaming, once before, once after the action. Because if the name becomes shorter and you update only after, garbage remains on the screen.
- CodeChange: made GetMaskOfTownActions() available to the town-cmd to double-check if the action was available to the player. For this purpose the hardcoded _local_player has been removed from the function and is now passed as a parameter.
- Add: GetVehicleTrackdir() helper function.
- Codechange: Moved SortStruct from vehicle_gui.h to ttd.h, so the dependency from vehicle.h on vehicle_gui.h could be removed.
- Codechange: Typedeffed the VehicleTypes struct so it can be used as the type for Vehicle.type instead of "byte".
- Codechange: Removed prototype for VehicleSorter(), which had no implementation anymore and was never called.
Buoys will now try to get within 3 tiles of a buoy instead of a the actual buoy tile. This gets ships to got past buoys in a realistic (IMO) way instead of barging right through them.
- Fix: [NPF] Trains get curves penalties sometimes even when the track is straight.
- Add: [NPF] Ships get a penalty for going over buoys now, so they will try to go around.
- Add: [NPF] Ships get a penalty for curves too, yay for straight lines.
- Add: TrackdirToTrack(), TrackToTrackdir(), IsDiagonalTrack() and IsDiagonalTrackdir() helper functions.
- Add: IsBuoy() and IsBuoyTile() helper functions.
- Codechange: Rearranged part of the control flow of ShipController(), removing a goto.
The bad sideeffect of this is that now no vehicle will automatically go to a depot anymore just
because it is set to be autoreplaced. We will have to find a better way to solve this problem.
Revisions reverted: 1640, 1707, 1709, 1710, 1712(but not the cheat prevention in this one)
- Add: asserts to find the v->u.rail.track == 0 problem.
- Add: IsValidDepot(), IsValidTown(), IsValidSign(), IsValidVehicle(), IsValidStation()
- Add: GetTileOwner(), IsTileOwner()
- Codechange: Replaced IsShipDepotTile(), IsTrainDepotTile(), IsRoadDepotTile() by IsTileDepotType().
- Codechange: typedeffed the MAP_OWNERS as Owner. Should be used as variable type.
- Codechange: Replaced a few uint by TileIndex.
-Codechange: Added wrappers around depot-access (GetDepot no exists)
-Codechange: Made depot-functions a bit more logic (no longer
GetDepotByTile crashes your game when you request it on a non-depot tile)
-Add: made depots dynamic (yes, 64k depots are possible now)
trains in one game (instead of the 240 which was the current value).
Default max allowed vehicles per type is changed:
Trains: 500 (old 80)
Road: 500 (old 80)
Ships: 200 (old 40)
Aicraft: 300 (old 50)
(Tnx to Celestar and Darkvater for checking the patch)
- Supports trains, road vehicles and ships.
- Uses A* pathfinding (same codebase as the new ai).
- Currently unlimited search depth, so might perform badly on large maps/networks (especially ships).
- Will always find a route if there is one.
- Allows custom penalties for obstacles to be set in openttd.cfg (npf_ values).
- With NPF enabled, ships can have orders that are very far apart. Be careful, this will break (ships get lost) when the old pathfinder is used again.
- Feature: Disabling 90 degree turns for trains and ships.
- Requires NPF to be enabled.
- Ships and trains can no longer make weird 90 degree turns on tile borders.
- Codechange: Removed table/directions.h.
- table/directions.h contained ugly static tables but was included more than once. The tables, along with a few new ones are in npf.[ch] now. Better suggestions for a location?
- Fix: Binary heap in queue.c did not allocate enough space, resulting in a segfault.
- Codechange: Rewritten FindFirstBit2x64, added KillFirstBit2x64.
- Codechange: Introduced constant INVALID_TILE, to replace the usage of 0 as an invalid tile. Also replaces TILE_WRAPPED.
- Codechange: Moved TileAddWrap() to map.[ch]
- Add TileIndexDiffCByDir(), TileIndexDiffCByDir().
- Codechange: Moved IsTrainStationTile() to station.h
- Add: IsRoadStationTile() and GetRoadStationDir().
- Fix: added check for v->type in some commands, which expects v to be a specific type
Checks like this is needed to protect network servers from people, who hack their clients to either cheat or crash the server
NOTE: if I made a mistake here it can make a function unreachable when it should be used. Here is one place to look if something weird happens
now all 4 types of vehicles have to be build in depots. Note: there is a wordaround for AI players since the AI handle aircraft building in a weird way
-Codechange: renamed all 'schedule' stuff to 'order(list)'
-Codechange: moved all order-stuff to order_cmd.c / order.h
-Codechange: vehicles that share orders are now linked to eachother
with next_shared/prev_shared in Vehicle
Developers: please use AssignOrder to assign data to an order. If not,
you _WILL_ make the save-routine to assert!
(in prepare of dynamic arrays):
- DEREF_XXX is changed into GetXXX
- All direct call are directed via GetXXX
- struct Industry has now an index-field
- ENUM'd some stuff
- Replaced home built loops with FOR_ALL_XXX
- Added _stations_size, _vehicles_size, ... which gives the length of the
array (which will be dynamic in the near future)
- Changed lengtof(XXX) to _XXX_size (e.g. _stations_size)
- Removed all endof(XXX) (because mostly it was part of a FOR_ALL_XXX)
- Made the sort-functions of all 4 dynamic
- Made all 4 Initialize functions more of the same
- Some minor tab-fixing and stuff
(tnx to Tron for proof-reading my 100kb patch ;))
Note for all: please do NOT directly call _stations, _vehicles, _towns and
_industries, but use the right wrapper to access them. Thank you.
Ps: please also do not use 'v++', where v is of type Vehicle *.
This feature works much like autorenew, but it will get you a new engine type instead of a new one of the same type. Once
ordered, it will automatically replace the engines while they visits a depot. The GUI for setting this up have been added on the
vehicle overview windows
Note: autorenew is now autoreplace, but to the same engine type
Nice new features, that was added to make this possible
- windows can now have two independant vertical scrollbars
- CMD_SHOW_NO_ERROR have been added as a flag for DoCommandP. It will make it do the action instead of showing the red box with
estimated costs even if shift is pressed
- fixed problem where enginetypes where not initialized when loading a game. It's now done in InitializeGame()
an uint8 till the savegame version is bumped to version 5. Then it works
automaticly as a fully uint16. So _stations[] can not be increased till
after the bump!!
This adds a little button per vehicle class to the station window which opens a list of all vehicles that have this station on their schedule.
As side effect this gets rid of some global variables.
This adds no functionality, but is a stepping stone for future improvement (like 16bit order indices) and is easier to read.
This changes preserves binary compatibility wrt savegames.
- reduce to 2 sizes (*DParam64 for 64bit values, *DParam for the rest)
- use inline functions instead of macros
- add assert()s to check for buffer overruns
This includes 2 fixes
-Fix: [1048596] Monorail and Maglev sounds are swapped (r511)
-Add special case to load the jackhammer sound (r478)
The rest are cleanups und enumeration to make merging possible/easier
-Fix: Sorter icon pointing down 'v' sorts in every window lowest value first, '^' highest value first
-CodeChange: move Dropdownlist from settings_gui.c to widget.c. More in place there.
tron